Blackline Safety LONER 900 User manual

ARTICLE
www.BlacklineSafety.com | 1GETTING STARTED WITH LONER BRIDGE & LONER 900
The Loner Bridge system consists of Loner 900(s) that connect to the Loner Bridge. This guide will help you get
started with your Loner Bridge system.
This guide will walk you through:
1. Using Loner Bridge and Loner 900
2. Receiving a message on Loner Bridge
3. Replying to a message on Loner Bridge
GETTING STARTED WITH LONER BRIDGE & LONER 900

www.BlacklineSafety.com | 2GETTING STARTED WITH LONER BRIDGE & LONER 900
Using your Loner Bridge & Loner 900
The Loner 900 and Bridge have many dierent functionalities that you may need help understanding. This
section can help clarify dierent questions you may have about your devices.
To start your shift:
1. Press and hold the power button on the bridge. When the green light is
solid it is safe to work.
2. Press and hold the power button on Loner 900. When the green light is
solid it is safe to work.
Note: always turn on Loner Bridge before turning on Loner 900
If you are OK:
Press the latch to silence the beeping
To reconnect:
Move closer to your Loner Bridge
How do I start my shift?
Why is my Loner 900 slowly beeping?
The device is starting a pending alarm to ask if you are OK.
Why is my Loner 900 ashing green?
You have lost connection to the bridge.

www.BlacklineSafety.com | 3GETTING STARTED WITH LONER BRIDGE & LONER 900
What to do:
Go back to your bridge to check for messages or see if one of your
colleagues needs assistance
What to do:
No action is required from you, when the alert is resolved the blue light
will turn o.
If you are OK:
Press the latch to silence the high alarm.
Note: this does not cancel the alert that has been sent to
monitoring personnel
What’s the blue light?
Monitoring personnel are responding to your alert and following your company’s protocol. Help is on the way.
To call for help:
Pull the latch. Your device will go into high alarm and an alert will be sent
to monitoring personnel.
What’s the yellow light?
You are being called back to your bridge.
Why is my Loner 900 beeping really fast?
Your device has gone into high alarm, you may have missed a check-in, triggered a fall detection alert, or a
no-motion alert has timed out.
How do I call for help?

www.BlacklineSafety.com | 4GETTING STARTED WITH LONER BRIDGE & LONER 900
What to do:
Charge your device as soon as possible
To end your shift:
1. Press and hold the power button on Loner 900. The device will go into
shut down sequence
2. Press and hold the power button on the bridge. The device will go into
shut down sequence.
Note: always turn o Loner 900 before turning o Loner Bridge
Why is there a short beep every 5 minutes?
Your battery is low
How do I end my shift?

www.BlacklineSafety.com | 5GETTING STARTED WITH LONER BRIDGE & LONER 900
Receiving a message on Loner Bridge
Monitoring personnel may send your bridge a text message for a variety of reasons. This section will walk you
through what will happen when your bridge receives a text message.
1. When your bridge receives a text message, your Loner 900 will notify
you by displaying a yellow light accompanied by red ashing lights
(team alert muster alarm)
2. To silence your Loner 900 device, press and hold the latch for 3 seconds
3. Once silenced, the red ashing lights will stop, but the yellow light will
remain on
4. Go to your Loner Bridge and view the message from monitoring
personnel displayed on the LCD screen
Note: ensure text message is read before moving to the next step
5. To reply to the message, silence the bridge by pressing the OK button 3
times. This will stop the team alert muster alarm.

www.BlacklineSafety.com | 6GETTING STARTED WITH LONER BRIDGE & LONER 900
Replying to a text message on Loner Bridge
If monitoring personnel sends your bridge a text message, you may need to respond. This section walks you
through how to send a text message from your bridge.
0081/R1/2016-06-30
1. Press the up arrow twice to go to the main menu
2. Press the OK button once to enter into the main menu
3. Press the down arrow once to navigate to the send message section
4. Press the OK button once to enter the send message section
5. Press the down arrow once to get to the rst text message option
6. To view other message options navigate the menu using the up and
down arrows
7. Once you have found the message you wish to send, press OK to send
the message
8. A conrmation message will appear on the bridge letting you know
your message has been sent
TeamAlert
back to menu
x2
Send Message
Understood
Txt Msg Sent
Menu
back to status
x1
Menu
Send Message
x1
Send Message
Send help
x1
Send Message
Understood
x1
Send Message
back to menu
x1