Blackline Safety LONER M6 User manual

LONER M6 QUICK REFERENCE GUIDE BlacklineSafety.com
0047/R3/2016-07-04
LONER M6 QUICK REFERENCE GUIDE
AUTOMATIC FEATURES
In the event of a potential fall, lack of motion or periodic check-in, the device will
start a pending local alarm. You have 30 seconds to press the latch, canceling this
local alarm before it escalates to monitoring personnel as a remote alert.
DURING YOUR SHIFT
REQUESTING HELP 2 WAY VOICE CALLS
No motion Fall detection Check-in
MANUAL FEATURES
Pulling down on the latch will immediately start a local alarm and send a remote alert to
monitoring personnel. Local alarms can be silenced, but the remote alert remains active.
Press and hold the latch to send an early check-in and update your location.
Emergency Alert
Request immediate help by
pulling down the red latch.
Early Check-In
Check in early and send an updated location
by pushing in the latch for 2 vibration cycles.
Starting your shift Throughout your shift Ending your shift
Press the power
button to turn on your
device.
Pull the latch to
immediately trigger a
remote alert.
Press latch to silence the local
alarm. This does not cancel the
remote alert sent to monitoring
personnel.
The blue light means
your remote alert has
been acknowledged by
monitoring personnel.
When monitoring
personnel connect
with the device, it
will beep once.
Once the call is
connected, you can
talk back and forth with
monitoring personnel.
When monitoring
personnel disconnect the
call, the device will beep
once more.
Wait for solid green
light.
Clip on your hip. A local pending
alarm (no motion, fall
detection, check-in).
Press the latch if you are
OK. This stops escalation
of the local alarm.
Press and hold the
power button to turn
o  .
Plug in device to
charge. Flashing lights
means the device is
charging.
Solid red lights mean
the device is fully
charged.
Blackline Safety:
Are you OK?
*BEEP* *BEEP*
Press the power