BlackVue DR750X LTE Plus User manual

DR750X LTE Plus 13
STEP 1 Install and power up
Install the front camera behind the rear view mirror. Install the rear camera at the top
of the back windshield. Remove any foreign matter and clean and dry the windshield
before installation.
Warning
yDo not install the product in a location where it can obstruct the driver's eld
of vision.
Turn o the engine. Open the cover of the microSD card slot, gently push the
card into the slot until it locks into place and close the cover.
To insert the SIM card, remove the bracket from front camera. Then open SIM slot
by using SIM eject tool.
SIM 카드
Note
yDR750X LTE Plus is only compatible with 4G LTE network.
ENGLISH

14 BLACKVUE
Note
yFor detailed information about activation of SIM card, please check "SIM activation
guide" in the packaging box or visit BlackVue Help Center: https://helpcenter.
blackvue.com -> SIM Activation Guide (LTE Series).
Peel off the protective film from the double-sided tape and attach the front
camera to the windshield behind the rear-view mirror.
44P16P29P14P15P12P11P9PSIM 카드 10P
Adjust the angle of the lens by rotating the body of the front camera.
We recommend pointing the lens slightly downwards (≈10° below horizontal),
so as to record video with a 6:4 road to background ratio.
Peel off the protective film from the double-sided tape and attach the rear
camera to the rear windshield. Adjust the angle of the lens by rotating the body
of the rear camera.

DR750X LTE Plus 15
Connect the front camera ('Rear' port) and the rear camera ('V out') using the rear
camera connection cable.
Use the pry tool to lift the edges of the rubber window sealing and molding and
tuck in the rear camera connection cable.
Rear camera connection cable
Plug the power cord into the cigarette lighter socket and the front camera.
Use the pry tool to lift the edges of the windshield trim/molding and tuck in the
power cord.
Power cord
Rear camera connection cable
ENGLISH

16 BLACKVUE
Turn on the engine. The BlackVue dashcam will power up and start recording.
Video les are stored on the microSD card.
Turn o the engine. The dashcam will automatically stop recording and power down.
To record in parking mode while the engine is off please install a parking mode
kit/battery from the BlackVue Power Magic range of accessories (sold separately).
Note
yWhen you run the dashcam for the first time the firmware is automatically
loaded onto the microSD card. After the firmware has been loaded onto
the microSD card you can customize settings using BlackVue Viewer on
acomputer.

DR750X LTE Plus 17
STEP 2 Playback
Playing video les on your smartphone (Android/iOS)
Search for the BlackVue app in the Google Play Store or Apple App Store and
install it on your smartphone.
“Pair” your smartphone with the BlackVue dashcam via Wi-Fi direct.
(i) Press the Wi-Fi button once to turn on Wi-Fi.
(ii) Go to your smartphone's Settings then select Wi-Fi, and make sure Wi-Fi is
turned on.
(iii) Choose your BlackVue dashcam from the network list. The dashcam’s default
SSID begins with its model number (e.g. BlackvueDR750XLTEPlus-******).
(iv) Enter the password and tap join.
*The default Wi-Fi SSID and password are printed on the dashcam's label or
on the product pad inside the packaging box.
ENGLISH

18 BLACKVUE
(v) Open the BlackVue app and select Connect to camera.
Select the video le you want to play from the video list.
Note
yWi-Fi direct lets you connect your smartphone to your dashcam via Wi-Fi
within a range of 10m.
yFor quick playback and download of the recordings, you can select the
"Quick play le" option from App settings.
yAll images shown are for illustration purpose only. Actual app may dier from
images shown.

DR750X LTE Plus 19
Playing video les on your computer (Windows/macOS)
Remove the microSD card from the dashcam.
Open side cover To remove
Insert the card into the microSD card reader and connect it to a computer.
Download BlackVue Viewer program from www.blackvue.com > Support >
Downloads and install it on your computer.
Run BlackVue Viewer. To play, select a video and click on the play button or
double click the selected video.
ENGLISH

20 BLACKVUE
Windows/macOS Viewer
Note
yAll images shown are for illustration purpose only. Actual program may dier
from images shown.

DR750X LTE Plus 21
STEP 3 Changing dashcam's time zone and other rmware
settings.
The dashcam's time zone is initially set to (GMT-11). To display the correct time please
select your time zone.
Using your smartphone (Android/iOS)
“Pair” your smartphone with the BlackVue dashcam via Wi-Fi direct (for details see
STEP 2 ‘Playing video les on your smartphone’)
Open the BlackVue app and select Connect to camera.
Tap the button to access the Firmware settings menu.
(i) Select Firmware settings > Basic > Time.
(ii) Select your time zone to auto-sync with GPS time or you can set the time and
date manually after enabling Manual time setting.
Go back to the Firmware settings menu and congure other desired settings.
Settings that can be changed include Wi-Fi SSID & password, image quality,
sensitivity settings, voice recording on/off, speed unit (km/h, MPH, off ), LEDs
on/o, voice guidance volume, Cloud settings etc.
Once settings are congured, tap and tap Save.
ENGLISH

22 BLACKVUE
Changing the dashcam's time zone and other firmware settings on
your computer (Windows/macOS)
Run BlackVue Viewer program after connecting dashcam's microSD card to your
computer. Click on the button to open the BlackVue settings panel.
Settings
Settings that can be changed include Wi-Fi SSID & password, image quality, sensitivity
settings, voice recording on/off, speed unit (km/h, MPH, off), LEDs on/off, voice
guidance volume, Cloud settings etc.
For more information about changing the settings in BlackVue Viewer, please download
the manual from www.blackvue.com > Support > Manuals.

DR750X LTE Plus 23
STEP 4 Connect to BLACKVUE CLOUD
Create an account
(i) Open the BlackVue app.
(ii) Tap the button in the top-left corner and select Log in.
(iii) Enter your e-mail and password if you have an account, otherwise tap Sign
up to create an account.
(iv) You will receive an e-mail. Click the link in the email to nish creating your
account.
Register your dashcam with your account
(i) In the BlackVue app select Connect to Cloud and login to your account.
(ii) Tap Yes to enable push notications (this setting can be adjusted at any time later).
(iii) Press + and then select .
(iv) Register your camera using one of the following methods:
QR Code: Press Scan QR Code and line up the QR Code on your smartphone’s
screen.
QR code/Cloud code/Serial number/IMEI number
or
Manual registration: Enter your camera’s Serial number and Cloud code and
press Add camera.
ENGLISH

24 BLACKVUE
Connect your BlackVue dashcam to a Wi-Fi hotspot for Cloud connectivity
(i) Make sure your BlackVue dashcam and mobile Wi-Fi hotspot are on.
(ii) “Pair” your smartphone with the BlackVue dashcam via Wi-Fi direct
(for details see STEP 2‘Playing video les on your smartphone’)
(iii) Open the BlackVue app. Select Connect to camera > > Firmware
settings > Cloud.
(iv) Ensure Enable Cloud service is on. Select Cloud service hotspot settings.
(v) Choose your Wi-Fi hotspot from the list. Enter the password and tap OK.
Note

DR750X LTE Plus 25
yUp to 3 Wi-Fi hotspot SSIDs can be saved (e.g. home, portable hotspot and work).
yThe BlackVue DR750X LTE Plus dashcam is not compatible with 5GHz
wireless networks.
(vi) Go back to the Firmware settings menu, tap and tap Save.
After rebooting, your dashcam will automatically establish internet connection.
If internet connection was not established, please ensure Wi-Fi information was
inserted correctly.
Select Connect to Cloud from the main screen to access all of the Cloud features.
Note
yIf LTE and Wi-Fi hotspot is available for internet connection, Wi-Fi hotspot will
be in priority. If LTE connection is preferred at all times, please remove Wi-Fi
hotspot information.
ENGLISH

26 BLACKVUE
Activate SIM card
For full details, refer to the SIM activation guide that is included in the package.
(i) Insert the SIM card as shown on STEP 1B.
(ii) “Pair” your smartphone with the BlackVue dashcam via Wi-Fi direct
(for details see STEP 2A)
(iii) Open the BlackVue app and select Connect to camera > .
(iv) Congure the APN settings to activate the SIM card. For detailed information,
please check "SIM activation guide" in the packaging box or visit BlackVue
Help Center: https://helpcenter.blackvue.com -> SIM Activation Guide
(LTE Series).
SIM card
activation
(v) Once your dashcam is connected to internet, you can go to the Connect to
Cloud menu to use the Cloud features.

DR750X LTE Plus 27
Note
yTo use the BlackVue Cloud Service, SIM card must be properly activated for
Internet access via LTE network.
yWhen the dashcam is connected to internet, you can use BlackVue Cloud
features such as remote Live View and Video playback, Real-time location,
push notication, Auto-upload, remote Firmware update etc. on BlackVue app
and PC Viewer.
ySome Cloud features may not work when surrounding temperature in high
and/or LTE speed is slow.
For more information about using the BlackVue app, please refer to the manual
from www.blackvue.com > Support > Manuals.
ENGLISH

28 BLACKVUE
Tips for optimal performance
For stable operation of the dashcam, it is recommended to format the microSD
card once a month.
On-device microSD card format:
Press and hold the Format button for 5seconds and once voice instructions
start, release the button. Then, press and hold again for 5seconds to format the
microSD card.
Format using BlackVue Viewer (Windows):
Download BlackVue Windows Viewer from www.blackvue.com > Support>
Downloads and install it on your computer. Insert the microSD card into the
microSD card reader and connect the reader to your computer. Launch the copy
of BlackVue Viewer that is installed on your computer. Click the Format button,
select the card drive and click OK.
Format using BlackVue Viewer (macOS):
Download BlackVue Mac Viewer from www.blackvue.com > Support >
Downloads and install it on your computer. Insert the microSD card into the microSD
card reader and connect the reader to your computer. Launch the copy of BlackVue
Viewer that is installed on your computer. Click the Format button and select the
microSD card from the list of drives in the left frame. After selecting your microSD
card select the Erase tab in the main window. Select“MS-DOS (FAT)”from the Volume
Format drop-down menu and click Erase.
Only use ocial BlackVue microSD cards. Other cards may have compatibility issues.
Regularly upgrade the rmware for performance improvements and updated features.
Firmware updates will be made available for download at www.blackvue.com >
Support > Downloads.

DR750X LTE Plus 29
Customer Support
For customer support, manuals and rmware updates please visit www.blackvue.com
You can also email a Customer Support expert at [e-mail]
ENGLISH

30 BLACKVUE
Product specications:
Model Name DR750X LTE Plus
LTE Built - in 4G LTE module compatible with nano SIM
Color/Size/Weight Front: Bla ck / Width 137.6 mm x Height 43 mm / 159 g
Rear: Black / Width 67.4 mm x Height 25 mm / 25 g
Memory microSD Card (32 GB/64 GB/128 GB/256 GB)
Recording Modes
Normal recording, Event recording (when impact is detected
in normal and parking mode), Manual recording and Parking
recording.
*For Parking mode recording, a Parking mode Battery Pack
(Power Magic Battery Pack) or a Parking Mode Hardwiring
Kit (Power Magic Pro) is required.
Camera Front: STARVIS™ CMOS Sensor (Approx.2.1M Pixel)
Rear: STARVIS™ CMOS Sensor (Approx.2.1M Pixel)
Viewing Angle Front: Diagonal 139°, Horizontal 116°, Vertical 61°
Rear: Diagonal 139°, Horizontal 116°, Vertical 61°
Resolution/
FrameRate
<Front - Rear>
Full HD (1920x1080) @60fps - Full HD (1920x1080) @30fps
* Frame rate may vary during Wi-Fi streaming.
Image Quality Highest(Extreme)/Highest/High/Normal
Video Compression
Mode MP4
Wi-Fi Built-in (802.11b/g/n (2.4 – 2.4835 GHz))
Bluetooth BT2.1+BT4.0 LE/BR/EDR+BT4.2
GPS Built-in
Microphone Built-in

DR750X LTE Plus 31
Speaker
(VoiceGuidance) Built-in
LED Indicators Front: Recording LED, GPS LED, LTE/Wi-Fi LED, Front Security LED
Rear: Rear Security LED
Sensor 3-Axis Acceleration Sensor
Button
Format button:
Press and hold for 5 seconds and once voice commands start,
release the button. Then press and hold for 5 seconds again to
format the microSD card.
Wi-Fi button:
Press once to turn on/o Wi-Fi.
Proximity sensor:
Touching the proximity sensor turns on/o audio recording or
triggers manual recording depending on the rmware settings.
Backup Battery Built-in super capacitor
Input Power DC 12V – 24V (DC Plug: (Ø3.5 x Ø1.35), MAX 1A/12V)
Power
Consumption
Avg. 410 mA (4.92 W at 12 V, GPS ON / Wi-Fi ON)
Avg. 290 mA (3.48 W at 12 V, GPS OFF / Wi-Fi OFF)
Avg. 430 mA (5.16 W at 12 V, GPS ON / LTE ON)
*Actual power consumption may vary depending on use
conditions and environment.
* Model DR750-2CH LTE Plus should be used only in circuits that
satisfy Limited Power Source.
(Maximum power consumption is to be less than 100 VA or 8 A).
Operation
Temperature -20 °C − 70 °C (-4 °F − 158 °F)
Storage
Temperature -20 °C − 70 °C (-4 °F − 158 °F)
ENGLISH

32 BLACKVUE
High Temperature
Cut-O Approx. 80 °C (176 °F)
Certications Front: FCC, ISED, CE, UKCA, RCM, Telec, RoHS, WEEE
Rear: FCC, ISED, CE, UKCA, RoHS, WEEE
Software BlackVue Viewer
* Windows 7 or higher and Mac OS X Sierra (v10.12) or higher
Application BlackVue Application (Android 5.0 or higher, iOS 11 or higher)
Others Adaptive Format Free File Management System
* STARVIS is a trademark of Sony Corporation.