BlackVue DR770X Box Series User manual

Detailed Manual
www.blackvue.com
ENGLISH/NEDERLANDS
BlackVue 7 Box Series
DR770X Box Series
Quick Start Guide

For manuals, customer support and FAQs go to www.blackvue.com
Voor handleidingen, Customer Support en Veelgestelde Vragen, ga naar www.blackvue.com
BLACKVUE
DR770X Box Series

DR770X Box Series 3
Important safety information
For user safety and to avoid property damage, read through this manual and follow these safety instructions to use the
product correctly.
yDo not disassemble, repair, or modify the product yourself.
Doing so may cause fire, electric shock, or malfunction. For internal inspection and repair, contact the service center.
yDo not adjust the product while driving.
Doing so may cause an accident. Stop or park your car in a safe place before installing and setting up the product.
yDo not operate the product with wet hands.
Doing so may cause electric shock.
yIf any foreign matter gets inside the product, detach the power cord immediately.
Contact the service center for repair.
yDo not cover the product with any material.
Doing so may cause external deformation of the product or fire. Use the product and peripherals in a well-ventilated
location.
yIf the product is used outside the optimal temperature range, performance can decline or malfunctions may occur.
yWhen entering or exiting a tunnel, when directly facing into bright sunlight, or when recording at night without lighting
the quality of recorded video may deteriorate.
yIf the product is damaged or the power supply is cut due to an accident, video may not be recorded.
yDo not remove the microSD card while the microSD card is saving or reading data.
The data can be damaged or malfunctions may occur.
yIt is desirable that the device be installed and operated with a distance of at least 20cm or more between the radiator
and a person’s body (excluding extremities: hand, wrists, feet, and ankles)

4BLACKVUE
FCC Compliance Information
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide reasonable protections against harmful interference in a residential
installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception which can be determined by turning the
equipment off and on, the user is encouraged to ty to correct the interference by one or more of the following measures.
yReorient or relocate the receiving antenna.
yIncrease the separation between the equipment and receiver.
yConnect the equipment into an outlet on a circuit different from that to which the receiver is connected.
yConsult the dealer or an experienced radio, TV technician for help.
yOnly shielded interface cable should be used.
Finally, any changes or modifications to the equipment by the user not expressly approved by the grantee or manufacturer
could void the user’s authority to operate such equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation of this
device.
FCC ID: YCK-DR770XBox

DR770X Box Series 5
CAUTION
Any changed or modifications in construction of this device which are not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
There is a risk of explosion if the battery is replaced by an incorrect type.
Dispose of used batteries according to the instructions.
Do not ingest battery, as it could cause chemical burns.
This product contains a coin / button cellbattery. If the coin / button cell battery is swallowed, it can cause severe internal
burns in just 2 hours and can lead to death.
Keep new and used batteries away from children.
If the battery compartment does not close securely, stop using the product and keep it away from children.If you think
batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.
Do not dispose of the battery into fire or a hot oven, or mechanically crush or cut the battery, it can result in an explosion.
Leaving a battery in an extremely high temperature environment can result in an explosion or the leakage of flammable
liquid or gas.
A battery subjected to extremely low air pressure may result in an explosion or the leakage of flammable liquid or gas.
CE WARNING
yChanges and modifications not expressly approved by the party responsible for compliance could void the user’s
authority to operate the equipment.
yIt is desirable that it be installed and operated with at least 20cm or more between the radiator and a person’s body
(excluding extremities: hand, wrists, feet, and ankles).

6BLACKVUE
IC Compliance
This Class [B] digital apparatus complies with Canadian ICES-003.
This radio transmitter has been approved by Industry Canada to operate with the antenna types listed below with the
maximum permissible gain and required antenna impedance for each antenna type indicated. Antenna types not included
in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this
device.
- IC Warning
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence.
L’exploitation est autorisée aux deux conditions suivantes:
(1) l’appareil ne doit pas produire de brouillage, et
(2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en
compromettre le fonctionnement.
Disposal of your BlackVue dashcam
1. All electrical and electronic products should be disposed of separately from the municipal waste
stream via designated collection facilities appointed by the government or the local authorities.
Contact local authorities to learn about disposal and recycling options available in your area.
2. The correct disposal of your BlackVue dashcam will help prevent potential negative consequences for
the environment and human health.
3. For more detailed information about disposal of your BlackVue dashcam, please contact your city
office, waste disposal service or the shop where you purchased the product.

DR770X Box Series 7
Declaration of Conformity
Product information
For the following
Product: radio equipment/ dashcam
Type: DR770X Box
Declaration and applicable standards
Hereby, TJM Supplies B.V. declares that the type of radio equipment DR770X Box conforms to:
Directive EMC 2014/53/EU and the RoHS directive (2011/65/EU) on the restriction of the use of certain hazardous
substances in electronic equipment by applying EN 50581: 2012 and IEC 62321-3-1: 2013.
The full text of the EU declaration of conformity can be found at the following internet address:
https://blackvue-nederland.nl/declaration-of-conformity/
Importer
Company: TJM Supplies B.V.
Address: Zompstraat 8
8102 HX Raalte
The Netherlands
Email: [email protected]
Phone number: [phone]
Business license number: 72016981
VAT number: NL858946439B01

8BLACKVUE
Verklaring van overeenstemming
Productgegevens
Voor het volgende
Product: radioapparatuur/ dashcam
Model(len): DR770X Box
Verklaring en toepasselijke normen
Hierbij verklaart TJM Supplies B.V., dat het type radioapparatuur DR770X Box conform is met:
Richtlijn EMC 2014/53/EU en de RoHS richtlijn (2011/65/EU) betreffende beperking van het gebruik van bepaalde
gevaarlijke stoffen in elektronische apparatuur door toepassing van EN 50581:2012 en IEC 62321-3-1:2013.
De volledige tekst van de EU-conformiteitsverklaring kan worden geraadpleegd op het volgende internetadres:
https://blackvue-nederland.nl/declaration-of-conformity/
Importeur
Bedrijfsnaam: TJM Supplies B.V.
Adres: Zompstraat 8
8102 HX Raalte
Nederland
Email: [email protected]
Telefoon: [phone]
KVK nummer: 72016981
BTW nummer: NL858946439B01

DR770X Box Series 9
In the box
Check the box for each of the following items before installing the BlackVue dashcam.
DR770X Box (Front + Rear + IR)
Main unit Front camera
Rear camera Rear Infrared camera
SOS button External GPS
Main unit Cigarette Lighter
power cable (3p)
Camera connection cable
(3EA)
Main unit Hardwiring power
cable (3p) microSD card
microSD card reader Quick start guide
Velcro strip Pry tool
Main unit key Allen wrench
Double-sided tape for the
Mounting Brackets
Spare screws for tamperproof
cover (3EA)
Need help?
Download the manual (including FAQs) and the latest firmware from www.blackvue.com
Or contact a Customer Support expert at [e-mail]
ENGLISH

10 BLACKVUE
DR770X Box Truck (Front + IR + ERC1 (Truck))
Main unit Front camera
Rear Infrared camera Rear Truck IR camera
SOS button External GPS
Main unit Cigarette Lighter
power cable (3p)
Camera connection cable
(2EA)
Main unit hardwiring power
cable (3p)
Rear camera connection cable
(15mlong waterproof)
Truck camera screws for the
mounting brackets (3eA) microSD card
microSD card reader Quick start guide
Velcro strip Pry tool
Main unit key Allen wrench
Double-sided tape for the
Mounting Brackets
Spare screws for tamperproof
cover (2EA)
Need help?
Download the manual (including FAQs) and the latest firmware from www.blackvue.com
Or contact a Customer Support expert at [e-mail]

DR770X Box Series 11
At a glance
The following diagrams explain each part of the DR770X Box.
Main box
GPS LED
: Lights blue when GPS is on.
: Blinks blue slowly when Bluetooth is in pairing mode.
: Blinks blue quickly when GPS is turning off, and/or (ii) Bluetooth is turning off.
Recording LED
: Lights orange in normal mode.
: Lights red when (i) an event is being recorded (impact detected),
or (ii) manual recording has started.
: Lights green in parking mode when motion is detected.
Bluetooth/Wi-Fi/LTE LED
: Lights yellow when LTE is connected.
: Lights white when Wi-Fi is connected.
: Blinks yellow when Bluetooth is connected.
36.5 mm
Lock
SOS button
LED indicator
: Blinking green light when inserting battery for the first time.
: Blinking green light when button is pressed.
: Blinking red and green lights when connecting to main unit.
: Blinking red light when voltage is low.
Emergency button
14.5 mm
45 mm
ENGLISH

12 BLACKVUE
Front camera
34 mm
46 mm
75.9 mm
Camera lens
Mounting bracket Tamperproof case
Main unit connection port
Front security LED
: Lights on during (i)normal mode, (ii)an event is being recorded
(impact detected), (iii)manual recording has started, or (iv)motion
is detected in parking mode.
: Blinks slowly during parking mode motion detection standby.
Rotate the screw on tamper proof cover
counterclockwise and detach the cover from
camera to connect the cable.
Rear camera
32 mm
45.3 mm
69.4 mm
Camera lens
Mounting bracket Tamperproof case
Main unit connection port
Front security LED
: Lights on during (i)normal mode, (ii)an event is being recorded
(impact detected), (iii)manual recording has started, or (iv)motion
is detected in parking mode.

DR770X Box Series 13
Rear Infrared camera
32 mm
69.4 mm
45 mm
Camera lens
Mounting bracket Illumination sensor
IR LED
V out (Main unit
connection port)
Rear security LED
: Stays on in all recording
modes but can be turned
off from firmware settings.
Rear truck camera
65 mm
81 mm
50 mm
36 mm
Illumination Sensor
External Mounting
Bracket
Main unit
connection port
Camera Lens
Angle Lock Screw
IR LED
ENGLISH

14 BLACKVUE
Main box and SOS Button Installation
Install the main unit (box) on the side of center console or inside the glove box.For the heavy duty vehicles, the box can also
be installed on the luggage shelf.
For Sedans For Heavy Vehicles
Insert the key in the box, rotate it counterclockwise and open the lock on the main unit. Take out the lock case and insert
the micro SD card.
Warning
yThe front camera cable must be connected to the respective port. Connecting it to rear camera port will give a
warning beep sound.

DR770X Box Series 15
Insert the cables into the cable cover and connect them to their respective ports.Fix the cover on the main unit and lock it.
SOS button can be installed where it’s in your arm’s reach and can be easily accessed.
Changing SOS Button Battery
STEP1. Unscrew the back panel of the SOS Button
STEP 2. Remove the battery and replace it with a new CR2450 type coin battery.
STEP 3 Close and re-screw the back panel of the SOS button.
ENGLISH

16 BLACKVUE
Front camera installation
Install the front camera behind the rear view mirror. Remove any foreign matter and clean and dry the windshield before
installation.
Detach the tamperproof bracket from the front camera by rotating the screw counterclockwise with the allen
wrench.
Connect the front camera ('Rear' port) and the main unit ('Front') using the rear camera connection cable.
Note
yPlease make sure that the front camera cable is connected to the “Front” port in the main unit.

DR770X Box Series 17
Align the tamperproof bracket with the mount bracket. Use the Allen wrench to tighten the screw. Do not fully
tighten the screw as this could be done after attaching the camera to the front windshield.
Peel off the protective film from the double-sided tape and attach the front camera to the windshield behind the
rear-view mirror.
Adjust the angle of the lens by rotating the body of the front camera.
We recommend pointing the lens slightly downwards (≈ 10° below horizontal), so as to record video with a 6:4 road
to background ratio. Tighten the screw fully.
ENGLISH

18 BLACKVUE
Use the pry tool to lift the edges of the rubber window sealing and/or molding and tuck in the front camera
connection cable.
Power cord
Camera connection cable

DR770X Box Series 19
Rear camera installation
Install the rear camera at the top of the back windshield. Remove any foreign matter and clean and dry the windshield
before installation.
Detach the tamperproof bracket from the rear camera by rotating the screw counterclockwise with the Allen wrench.
Connect the rear camera ('Rear' port) and the main unit ('Rear') using the rear camera connection cable.
Note
yPlease make sure that the Rear camera cable is connected to the“Rear” port in the main unit.
yIn case of connecting the rear camera cable to “Rear” port the output file name will start with “R”.
yIn case of connecting the rear camera to “Option” port the output file name will start with “O”.
ENGLISH

20 BLACKVUE
Align the tamperproof bracket with the mount bracket. Use the Allen wrench to tighten the screw. Do not fully
tighten the screw as this should be done after attaching the camera to the rear windshield.
Peel off the protective film from the double-sided tape and attach the rear camera to the rear windshield.
Adjust the angle of the lens by rotating the body of the front camera.
We recommend pointing the lens slightly downwards (≈ 10° below horizontal), so as to record video with a 6:4 road
to background ratio. Tighten the screw fully.
Use the pry tool to lift the edges of the rubber window sealing and/or molding and tuck in the rear camera
connection cable.
Camera connection cable