Blaupunkt London MP37 User manual

Radio CD MP3 WMA
London MP37 7 647 573 510
Operating and installation instructions
Mode d’emploi et de montage
Instrucciones de manejo e instalación
Instruções de serviço e de montagem
操作及安裝手冊
사용 및 장착 설명서사용 및 장착 설명서
www.blaupunkt.com
01_LondonMP37_us_gb.indd 101_LondonMP37_us_gb.indd 1 12/8/06 3:48:45 PM12/8/06 3:48:45 PM

2
14
25
9
1
3
46
7810
11
1213
01_LondonMP37_us_gb.indd 201_LondonMP37_us_gb.indd 2 12/8/06 3:48:46 PM12/8/06 3:48:46 PM

3
ENGLISH
1button to open the flip-release con-
trol panel.
2On/Off button
Short press: Switches the device on.
In operation: Mutes the device.
Long press: Switches the device off.
3SOURCE button
Short press: Source selection be-
tween radio and CD and (if connected
or switched on) CD changer, AUX and
FRONT AUX.
Long press: Briefly displaying time.
4Volume control
5Keys 1 - 5
6FRONT AUX input
7XBASS button for switching X-BASS
on/off and adjusting it
8Arrow keys and
9ESC•DIS button
Short press:Changesfroma menuitem
back to the main menu (also in Audio
menu).
Long press: Changes display contents.
:Arrow keys and
;MENU/OK button
Short press: Calls up the menus for ba-
sic settings and confirms settings.
Ending the scan function.
Long press: Starts the Scan function.
<AUD button to call up the Audio menu:
Adjusting bass, treble, middle, subout,
balance and fader.
Selects an equaliser presetting.
=BAND/TS button
Short press: Selects the FM memory
banks and the AM waveband.
Long press: Starts the Travelstore func-
tion.
>button (Eject) for removing a CD
from the device.
Controls
01_LondonMP37_us_gb.indd 301_LondonMP37_us_gb.indd 3 12/8/06 3:48:47 PM12/8/06 3:48:47 PM

4
Contents
About these instructions....................6
Symbols used..................................6
Use as directed................................ 6
Declaration of conformity..................6
For your safety ..................................7
If you are installing device yourself......7
Cleaning notes.................................7
Disposal of old unit (EU countries only)...8
Scope of delivery...............................8
Optional equipment (not part of the
scope of delivery)............................8
Warranty...........................................9
Service .......................................... 9
Detachable control panel ................... 9
Theft protection...............................9
Detaching the control panel............... 9
Attaching the control panel..............10
Switch-off time (OFF TIMER)........... 10
Switching on/off..............................11
Adjusting the volume .......................11
Setting the power-on volume ...........11
Quickly reducing the volume (Mute).. 12
Telephone Audio/Navigation Audio...12
Switching the confirmation beep
on/off .......................................... 13
Radio mode..................................... 13
Adjusting the tuner.........................13
Switching to radio mode .................14
Selecting the waveband/
memory bank................................14
Tuning into a station .......................14
Setting the sensitivity of station
seek tuning ................................... 14
Storing stations ............................. 15
Storing stations automatically
(Travelstore) .................................15
Listening to stored stations ............. 15
Scanning receivable stations (SCAN) ...15
Setting the scanning time................16
CD mode ......................................... 16
Switching to CD mode ....................16
Selecting tracks............................. 17
Fast track selection ........................17
Fast searching (audible)..................17
Random track play (MIX).................17
Scanning tracks (SCAN)..................17
Repeating tracks (Repeat)...............18
Interrupting playback (PAUSE).........18
Configuring the display................... 18
Displaying CD text.......................... 18
Ejecting a CD.................................19
MP3/WMA mode .............................19
Preparing an MP3 CD .....................19
Switching to MP3 mode.................. 21
Configuring the display................... 21
Selecting a directory ...................... 21
Selecting tracks/files...................... 22
Fast search ...................................22
Random track play – MIX.................22
Scanning tracks – SCAN .................22
Repeated playback of individual tracks
or entire directories – REPEAT .........23
Interrupting playback (PAUSE).........23
01_LondonMP37_us_gb.indd 401_LondonMP37_us_gb.indd 4 12/8/06 3:48:47 PM12/8/06 3:48:47 PM

5
ENGLISH
External audio sources.....................32
Switching the rear AUX input on/off..32
Specifications .................................33
Amplifier ......................................33
Tuner ........................................... 33
CD............................................... 33
Pre-amp out..................................33
Input sensitivity............................. 33
Installation instructions ................. 188
Contents
CD-changer mode............................23
Switching to CD-changer mode........ 23
Selecting CDs................................ 23
Selecting tracks............................. 23
Fast searching (audible)..................23
Repeating individual tracks or whole
CDs (REPEAT)...............................24
Random track play (MIX).................24
Scanning all tracks on all CDs (SCAN)...24
Interrupting playback (PAUSE).........24
Configuring the display................... 25
Clock – Time....................................25
Displaying the time ........................25
Setting the time.............................25
Selecting 12/24-hour clock mode....25
Displaying the time continuously
when the device is off and the
ignition is on ................................. 26
Sound ............................................. 26
Adjusting the bass .........................26
Adjusting the middle ......................27
Adjusting the treble........................27
Setting the left/right volume
distribution (balance).....................28
Adjusting the front/rear volume
distribution (fader) ........................28
Preamplifier output
(Preamp-Out/Sub-Out) ....................28
Adjusting the sub-out level .............. 28
Adjusting the sub-out cutoff
frequency..................................... 29
X-BASS ...........................................29
Adjusting the X-BASS boost.............29
Equaliser presettings (Presets) ........ 30
Adjusting the display settings...........30
Adjusting the display brightness.......30
Setting the display illumination
colour ..........................................31
01_LondonMP37_us_gb.indd 501_LondonMP37_us_gb.indd 5 12/8/06 3:48:47 PM12/8/06 3:48:47 PM

6
About these instructions
About these instructions
These instructions contain important infor-
mation to easily and safely install and oper-
ate the device.
Read these instructions carefully and
completely before using the device.
Keep the instructions at a location so
that they are always accessible to all
users.
Always pass on the device to third par-
ties together with these instructions.
In addition, observe the instructions of the
devices used in conjunction with this de-
vice.
Symbols used
These instructions employ the following
symbols:
DANGER!
Warns about injuries
CAUTION!
Warns about laser beam
CAUTION!
Warns about damaging the CD
drive
The CE mark confirms the compli-
ance with EU directives.
Identifies a sequencing step
Identifies a listing
•
•
•
쏅
•
Use as directed
This device is intended for installation and
operation in a vehicle with 12 V vehicle sys-
tem voltage and must be installed in a DIN
slot. Observe the 'performance limits in the
technical data. Repairs and installation, if
necessary, should be performed by a spe-
cialist.
Declaration of conformity
The Blaupunkt GmbH declares that this
car sound system complies with the basic
requirements and the other relevant regula-
tions of the directive 1999/5/EG.
01_LondonMP37_us_gb.indd 601_LondonMP37_us_gb.indd 6 12/8/06 3:48:47 PM12/8/06 3:48:47 PM

7
ENGLISH
For your safety
For your safety
The device was manufactured according to
the state of the art and established safety
guidelines. Even so, dangers may occur if
you do not observe the safety notes in these
instructions.
If you are installing device
yourself
You may only install the device yourself if
you are experienced in installing car sound
systems and are very familiar with the elec-
trical system of the vehicle. For this pur-
pose, observe the installation instructions
at the end of these instructions.
Observe the following!
DANGER!
Incaseofanaccident,theprotrud-
ing connector in the front AUX-IN socket
may cause injuries. Only operate an exter-
nal device via the front AUX-IN socket while
the vehicle is standing.
CAUTION!
The device contains a Class 1 laser
that can cause injuries to your eyes.
Do not open the device and do not perform
any modifications.
In operation
Operate the device only if traffic situa-
tion permits it! Stop at a suitable loca-
tion to perform more extensive opera-
tions.
Removeor attachthecontrolpanelonly
while the vehicle is standing an.
Always listen at a moderate volume
so that you can hear acoustic warning
signals (e.g. police sirens) and protect
your hearing. Do not increase the vol-
ume when selecting a different audio
source or while the CD changer chang-
es the CD. The device is briefly muted.
After operation
The device is worthless to a thief with-
out the control panel. Always remove
the control panel whenever you leave
the vehicle.
Transport the control panel so that it is
protected against impacts and the con-
tacts cannot become dirty.
Cleaning notes
Solvents, cleaning and scouring agents as
well as dashboard spray and plastics care
product may contain ingredients that will
damage the surface of the device.
Use only a dry or slightly moistened
cloth for cleaning the device.
If necessary, clean the contacts of the
control panel regularly using a soft
cloth moistened with cleaning alcohol.
•
•
•
•
•
•
•
01_LondonMP37_us_gb.indd 701_LondonMP37_us_gb.indd 7 12/8/06 3:48:48 PM12/8/06 3:48:48 PM

8
Disposal of old unit
(EU countries only)
Do not dispose of your old unit in the
household trash!
Use the return and collection systems avail-
able to dispose of the old device.
Scope of delivery
The scope of delivery includes:
1 Car sound system
1 Case for the control panel
1 Support frame
2 Disassembly bar
1 Guide pin
1 Operating instructions
1 Handheld remote control RC 12H
Optional equipment
(not part of the scope of delivery)
Use only accessories approved by Blaupunkt.
Steering wheel remote control
The steering wheel remote control allows
you to access the basic functions of your
car sound system safely and conveniently
from the steering wheel.
You cannot switch the device on/off using
the remote control!
You can find out from your Blaupunkt dealer
or on the Internet at www.blaupunkt.com
which remote controls can be used with
your car sound system.
Amplifier
You can use all Blaupunkt and Velocity am-
plifiers.
CD changers
You can connect the following Blaupunkt
CD changers:
CDC A 03, CDC A 08 and IDC A 09.
For your safety Scope of delivery
01_LondonMP37_us_gb.indd 801_LondonMP37_us_gb.indd 8 12/8/06 3:48:48 PM12/8/06 3:48:48 PM

9
ENGLISH
Warranty
We provide a manufacturer's warranty
for products bought within the European
Union. Devices purchased outside the
European Union are subject to the warranty
terms published by our respective regional
agency.
The warranty terms can be called up under
www.blaupunkt.com or requested directly
from:
Blaupunkt GmbH
Hotline
Robert-Bosch-Str. 200
D-31139 Hildesheim
Service
Insome countries,Blaupunkt offersa repair
and pick-up service.
Information about the availability of this
service in your country can be found at
www.blaupunkt.com.
If you want to take advantage of this serv-
ice, you may request a pick-up service for
your device via the Internet.
Detachable control panel
Theft protection
The device is equipped with a detachable
control panel (flip-release panel) as a way
of protecting your equipment against theft.
The device is worthless to a thief without
this control panel.
Protect your device against theft by taking
the control panel with you whenever you
leave your vehicle. Do not leave the control
panel inside your vehicle - not even in a hid-
ing place.
Notes:
Never drop the control panel.
Never expose the control panel to di-
rect sunlight or other heat sources.
Avoid direct skin contact with the
control panel’s electrical contacts. If
necessary, please clean the contacts
with a lint-free cloth moistened with
cleaning alcohol.
Detaching the control panel
Press the button 1.
The control panel opens out towards you.
Hold the control panel by its right side
and then pull the control panel straight
out of the bracket.
•
•
•
쏅
쏅
Warranty Detachable control panel
01_LondonMP37_us_gb.indd 901_LondonMP37_us_gb.indd 9 12/8/06 3:48:48 PM12/8/06 3:48:48 PM

10
Notes:
The device is switched off after a
time preset by you. For instructions,
please read the section "Switch-off
time (OFF TIMER)" in this chapter.
All the current settings are saved.
Any CD already inserted in the device
remains there.
Attaching the control panel
Hold the control panel approximately at
a right angle to the device.
Slide the control panel into the de-
vice’s guides that are positioned on the
left and right at the lower edge of the
housing. Push the control panel care-
fully into the bracket until it clicks into
place.
Carefully flip up the control panel until
it clicks into place.
1.
2.
If the device was still switched on when you
detached the control panel, it will automati-
cally switch on with the last setting activat-
ed (radio, CD, CD changer or AUX) when
the panel is replaced.
•
•
•
쏅
쏅
쏅
Switch-off time (OFF TIMER)
After opening the control panel, the device
is switched off after an adjustable time. You
can set this time from 0 to 30 seconds.
Press the MENU button ;.
Press the or button :repeatedly
until the displays shows "OFF TIMER".
Press the or button 8to open the
menu.
Set the time with the or button 8.
When you have finished making your
changes,
press the MENU button twice ;.
Note:
If you set the switch-off time to 0 sec-
onds, the device is switched off imme-
diately after opening the control panel.
쏅
쏅
쏅
쏅
쏅
Detachable control panel
01_LondonMP37_us_gb.indd 1001_LondonMP37_us_gb.indd 10 12/8/06 3:48:48 PM12/8/06 3:48:48 PM

11
ENGLISH
Switching on/off
There are various ways of switching the de-
vice on/off:
Switching on/off using button 2
To switch on the device, press button
2.
The device switches on.
To switch off the device, press and
hold down button 2for longer than
two seconds.
The device switches off.
Switching on/off using the vehicle
ignition
The device will switch on/off simultane-
ously with the ignition if the device is cor-
rectly connected to the vehicle’s ignition as
shown in the installation instructions and
you did not switch the device off by press-
ing button 2.
Switching the device on/off using the
detachable control panel
Detach the control panel.
The devices switches off after the time set
in the "OFF TIMER" menu.
Attach the control panel again.
The device switches on. The last setting
(radio, CD, CD changer or AUX) is reacti-
vated.
Note:
To protect the vehicle battery, the de-
vice will switch off automatically after
one hour if the ignition is off.
쏅
쏅
쏅
쏅
Adjusting the volume
You can adjust the volume in increments
from 0 (off) to 66 (maximum).
To increase the volume,
turn the volume control 4clockwise.
To decrease the volume,
turn the volume control 4counter-
clockwise.
Setting the power-on volume
Note:
The device features a time-out function
(time window).
For example, if you press the MENU
button ;and select a menu item,
the device switches back after ap-
prox. 8 seconds after the last button
activation. The settings performed are
saved.
You can set the power-on volume.
Press the MENU button ;.
Press the or button :repeat-
edly until "ON VOLUME" appears on the
display.
Press the or button 8to open the
menu.
Set the power-on volume with the or
button 8.
To help you adjust the setting more easily,
the device will increase or decrease the vol-
ume as you make your changes.
If you enable "LAST VOL", the volume which
was set the last time you switched off the
device is re-enabled.
쏅
쏅
쏅
쏅
쏅
쏅
Switching on/off Volume
01_LondonMP37_us_gb.indd 1101_LondonMP37_us_gb.indd 11 12/8/06 3:48:48 PM12/8/06 3:48:48 PM

12
When you have finished making your
changes,
press the MENU button twice ;.
Telephone Audio/Navigation
Audio
If your car sound system is connected to a
mobile telephone or a navigation system,
the sound system’s volume will be muted as
soon as you "pick up" the phone or as soon
as a navigation announcement is made. You
will then hear the caller or navigation an-
nouncement over the car sound system’s
loudspeakers. In order for this feature to
work, the mobile telephone or navigation
system must be connected to the car sound
system as described in the installation in-
structions.
You can find out from your Blaupunkt dealer
which navigation systems can be used with
your car sound system.
You can adjust the volume with which you
switch on the telephone calls or the voice
output of the navigation.
Press the MENU button ;.
Press the or button :repeatedly
until "TEL VOL" appears on the display.
Press the or button 8to open the
menu.
Set the desired volume with the or
button 8.
When you have finished making your
changes,
press the MENU button twice ;.
쏅
쏅
쏅
쏅
쏅
쏅
Note:
To protect your hearing, the power-on
volume is limited to the value "38" for
the setting "LAST VOL". If the volume
was higher before switch-off, the value
is automatically set to "38" at switch-
on. This prevents an unintentionally
and unexpectedly high volume when
switching on the device.
When you have finished making your
changes,
press the MENU button twice ;.
Quickly reducing the volume
(Mute)
You can quickly reduce the volume to a pre-
set level (Mute).
Briefly press button 2.
"MUTE" appears on the display.
Cancelling mute
To return to your previously set volume
level,
briefly press button 2again.
Adjusting the mute level
You can adjust the mute level.
Press the MENU button ;.
Press the or button :repeat-
edly until "MUTE LVL" appears on the
display.
Press the or button 8to open the
menu.
Set the mute level with the or but-
ton 8.
쏅
쏅
쏅
쏅
쏅
쏅
쏅
Volume
01_LondonMP37_us_gb.indd 1201_LondonMP37_us_gb.indd 12 12/8/06 3:48:48 PM12/8/06 3:48:48 PM

13
ENGLISH
Note:
You can use the volume control 4to
adjust the volume of telephone calls
and navigation announcements whilst
you are listening to them.
Switching the confirmation beep
on/off
The system will output a confirmation beep
for some functions if you keep a button
pressed down for longer than two seconds,
for instance, when assigning a radio station
to a station preset button. You can switch
the beep on or off.
Press the MENU button ;.
Press the or button :repeatedly
until"BEEP ON" or "BEEP OFF" appears
on the display.
Switch the BEEP ON or OFF with the
or button 8.
When you have finished making your
changes,
press the MENU button ;.
쏅
쏅
쏅
쏅
Radio mode
Adjusting the tuner
To ensure proper functioning of the tuner,
the device must be set for the region in
which it is being operated. You can select
among Europe "EUROPE", America "USA",
South America "S-AMERICA", and Thailand
"THAI". The tuner is factory-set to the re-
gion in which it was sold. If you experience
problems with your radio reception, please
check this setting.
The radio functions described in these op-
erating instructions refer to the tuner set-
ting USA.
Switch off the device by pressing but-
ton 2.
Holdthe buttons1and 55pressedat
the same time and switch on the device
again with the button 2.
"TUNER" is displayed.
Select your tuner region with the or
button :.
To save the setting,
switch the device off and on again or
wait approx. 8 seconds. The radio
starts playing with the last setting se-
lected (radio, CD, CD changer or AUX).
쏅
쏅
쏅
쏅
Volume Radio mode
01_LondonMP37_us_gb.indd 1301_LondonMP37_us_gb.indd 13 12/8/06 3:48:48 PM12/8/06 3:48:48 PM

14
Switching to radio mode
If you are in CD, CD changer or AUX mode,
press the BAND/TS button =
or
press the SOURCE button 3repeat-
edlyuntilthememorybank,e.g. "FM1",
appears on the display.
Selecting the waveband/memory
bank
This device can receive programmes broad-
cast over the FM and AM frequency bands.
There are three memory banks available for
the FM waveband (FM1, FM2 and FMT) and
one for each of the AM waveband.
Five stations can be stored in each memory
bank.
To switch between the FM memory banks
(FM1, FM2 and FMT) and the AM wave-
band,
briefly press the BAND/TS button =.
Tuning into a station
There are various ways of tuning into a sta-
tion.
Automatic station seek tuning
Press the or button :.
The radio tunes into the next receivable sta-
tion.
쏅
쏅
쏅
쏅
Tuning into stations manually
You can also tune into stations manually.
To change the set frequency in small incre-
ments,
briefly press the or button 8.
To change the set frequency quickly,
press and hold down the or button
8for a longer period of time.
Setting the sensitivity of station
seek tuning
You can choose whether the radio should
only tune into stations providing good re-
ception or whether it can also tune into
those with a weak reception.
Press the MENU button ;.
Press the or button :repeatedly
until "SENS HI" or "SENS LO" appears
on the display.
The display shows the current setting for
the sensitivity level. "SENS HI" means high,
"SENS LO" low sensitivity.
Set the desired sensitivity with the or
button 8.
When you have finished making your
changes,
press the MENU button ;.
Note:
The device stores the sensitivity value
set in the respective FM and AM wave-
band.
쏅
쏅
쏅
쏅
쏅
쏅
Radio mode
01_LondonMP37_us_gb.indd 1401_LondonMP37_us_gb.indd 14 12/8/06 3:48:49 PM12/8/06 3:48:49 PM

15
ENGLISH
Storing stations
Storing stations manually
Select the desired memory bank FM1,
FM2, FMT or the AM waveband.
Tune into the desired station.
Press and hold down one of the station
buttons 1 - 5 5for longer than two
seconds to assign the station to that
button.
Storing stations automatically
(Travelstore)
You can automatically store the five stations
offering the strongest reception in the re-
gion for FM and AM. The stations are stored
in the FMT or AM memory bank.
Note:
Previously stored stations in this bank
are replaced by newly stored stations.
Use the BAND/TS button =to select
one of the memory banks FM1, FM2 or
FMT for storing FM stations or the AM
waveband for storing AM stations.
Pressandholddownthe BAND/TSbut-
ton =for longer than two seconds.
Thestoringprocedurebegins."FMTSTORE"
or "AM TSTORE" appears on the display.
After the process has completed, the radio
willplaythe station thatis storedin memory
location 1 of the FMT or AM memory bank.
쏅
쏅
쏅
쏅
쏅
Listening to stored stations
Select the memory bank or waveband.
Press one of the station buttons 1 - 5
5.
The stored station is played if it can be re-
ceived.
Scanning receivable stations
(SCAN)
You can use the scan function to play all the
receivable stations briefly. You can set the
scanning time in the menu to between 5
and 30 seconds.
Starting SCAN
Press and hold down the MENU button
;for longer than two seconds.
The radio scans the next receivable station.
The current memory bank and "SCAN" ap-
pear briefly on the display followed by a
flashing display of the current station name
or frequency.
Cancelling the SCAN and continuing to
listen to a station
Press the MENU button ;.
Scanning stops and the radio continues
playing the station that it tuned into last.
쏅
쏅
쏅
쏅
Radio mode
01_LondonMP37_us_gb.indd 1501_LondonMP37_us_gb.indd 15 12/8/06 3:48:49 PM12/8/06 3:48:49 PM

16
Setting the scanning time
Press the MENU button ;.
Press the or button :repeat-
edly until "SCAN TIME" appears on the
display.
Press the or button 8to open the
menu.
Set the desired scan time with the or
button 8.
When you have finished making your
changes,
press the MENU button twice ;.
Note:
The defined scanning time is also ap-
plied by the system to scanning carried
out in CD and CD changer mode.
쏅
쏅
쏅
쏅
쏅
CD mode
You can use this device to play standard au-
dio CDs, CD-Rs and CD-RWs with a diame-
ter of 12 cm. To avoid problems when play-
ing self-burned CDs, you should not burn
CDs at speeds greater than 16-speed.
Risk of severe damage to the
CD drive!
CD singles with a diameter of 8 cm and non-
circular contoured CDs (shape CDs) must
not be used.
We accept no responsibility for any damage
to the CD drive that may occur as a result of
the use of unsuitable CDs.
To ensure proper functioning, use only CDs
withtheCompact-Disclogo.Copy-protected
CDs can cause playback problems.
Blaupunkt cannot guarantee the proper
functioning of copy-protected CDs!
Besidesbeing ableto playaudio CDs on this
device, you can also play CDs containing
MP3/WMA music files. For further informa-
tion,please readthe chapterentitled "MP3/
WMA mode".
Switching to CD mode
If there is no CD inserted in the drive,
press the button 1.
The control panel opens.
Gently insert the CD with its printed
side uppermost into the drive until you
feel some resistance.
쏅
쏅
Radio mode CD mode
01_LondonMP37_us_gb.indd 1601_LondonMP37_us_gb.indd 16 12/8/06 3:48:49 PM12/8/06 3:48:49 PM

17
ENGLISH
The drive draws in the CD automatically.
You must not hinder or assist the drive as it
draws in the CD.
Gently close the control panel whilst
exerting a little pressure until you feel
it click into place.
The CD playback starts and "CD" is shown
on the display.
Note:
If the vehicle ignition was switched
off prior to inserting the CD, you must
switch the device on first with the but-
ton 2to start the playback.
If a CD is already inserted in the drive,
press the SOURCE button 3repeat-
edly until "CD" appears on the display.
Playback begins from the point at which it
was last interrupted.
Selecting tracks
Press an arrow button 8or :to se-
lect the next or previous track.
If you press the button :or button
8once, the player will play the current
track again from the beginning.
Fast track selection
To quickly select tracks backwards or for-
wards,
press and hold down the or but-
ton :until fast track selection back-
wards / forwards begins.
쏅
쏅
쏅
쏅
Fast searching (audible)
To fast search backwards or forwards,
press and hold down the or button
8until fast searching backwards/for-
wards begins.
Random track play (MIX)
Press the 5 MIX button 5.
"MIX CD" appears briefly on the display and
the MIX symbol is displayed. The next ran-
domly selected track will then be played.
Cancelling MIX
Press the 5 MIX button 5again.
"MIX OFF" appears briefly on the display
and the MIX symbol disappears.
Scanning tracks (SCAN)
You can scan (briefly play) all the tracks on
the CD.
Press the MENU button ;for longer
than two seconds.
Thenexttrackwill thenbescanned.Thedis-
playbriefly shows"TRKSCAN". Theflashing
track number is displayed next.
Note:
You can set the scanning time. For
further information, please read the
section entitled "Setting the scanning
time" in the "Radio mode" chapter.
쏅
쏅
쏅
쏅
CD mode
01_LondonMP37_us_gb.indd 1701_LondonMP37_us_gb.indd 17 12/8/06 3:48:49 PM12/8/06 3:48:49 PM

18
Cancelling Scan and continuing listening
to a track
To end the scanning process,
press the MENU button ;.
The currently scanned track will then con-
tinue to be played normally.
Repeating tracks (Repeat)
If you want to repeat a track,
press the 4 RPT button 5.
"RPT TRCK" appears briefly on the display
and the RPT symbol is displayed. The track
is repeated continuously until you deacti-
vate Repeat.
Cancelling Repeat
If you want to cancel the repeat function,
press the 4 RPT button 5again.
"RPT OFF" appears briefly on the display
and the RPT symbol disappears. Normal
playback is then resumed.
Interrupting playback (PAUSE)
Press the button 35.
"PAUSE" appears on the display.
Cancelling pause
During the pause, press the button
35.
Playback is continued.
쏅
쏅
쏅
쏅
쏅
Configuring the display
You can choose from various display op-
tions in CD mode:
Track number and playing time
Track number and time
To switch between the display options,
press the ESC•DIS button 9for long-
er than 2 seconds.
Displaying CD text
Some CDs include CD text. The CD text
might contain the names of the artist, al-
bum and tracks.
The CD text is shown as scrolling text on the
display with every track change.
Switching CD text on/off
Press the MENU button ;.
Press the or button :repeatedly
until "CD TEXT" appears on the display.
Press the or button 8to open the
menu.
Select between the options "TEXT ON"
(show CD text) or "TEXT OFF" (hide CD
text) using the or button 8.
When you have finished making your
changes,
press the MENU button twice ;.
•
•
쏅
쏅
쏅
쏅
쏅
쏅
CD mode
01_LondonMP37_us_gb.indd 1801_LondonMP37_us_gb.indd 18 12/8/06 3:48:49 PM12/8/06 3:48:49 PM

19
ENGLISH
Ejecting a CD
Press the button 1.
The control panel opens out towards you.
Press the button >next to the CD
compartment.
The CD is ejected.
Remove the CD and close the control
panel.
Notes:
If a CD is ejected, the drive will auto-
matically draw it back in again after
10 seconds.
You can also eject CDs whilst the de-
vice is switched off or whilst another
audio source is activated.
쏅
쏅
쏅
•
•
MP3/WMA mode
You can also use this car sound system to
play CD-Rs and CD-RWs that contain MP3
music files. You can also play WMA files.
The operation for playing MP3 and WMA
files is identical.
Notes:
WMA files with Digital Rights
Management (DRM) from online mu-
sic shops cannot be played with this
device.
WMA files can only be played back
safely if they were created with
Windows Media Player version 8 or
later.
Preparing an MP3 CD
The various combinations of CD burners,
CD burning software and CD blanks may
lead to problems arising with the device’s
ability to play certain CDs. If problems oc-
cur with your own burned CDs, you should
try another brand of CD blank or choose an-
other colour of CD blank.
The format of the CD must be ISO 9660
Level1/Level2 orJoliet.Other formatscan-
not be played reliably.
You can create a maximum of 252 directo-
ries on a CD. You can use this device to ac-
cess directories individually.
Regardless of the number of directories on
the CD, the device can handle up to 511
MP3 files on a single CD, with a maximum
of 255 files in one directory.
•
•
CD mode MP3/WMA mode
01_LondonMP37_us_gb.indd 1901_LondonMP37_us_gb.indd 19 12/8/06 3:48:49 PM12/8/06 3:48:49 PM

20
This device supports as many subdirecto-
ries as your burner software can create de-
spite the fact that the maximum directory
depth defined by the ISO 9660 standard
is only 8.
D01
D02
T001
T005
T004
T003
T002
D03
T001
T006
T005
T004
T003
T002
T011
T007
T008
T009
T010
D04
T001
T006
T005
T004
T003
T002
A
B
ADirectories
BTracks · Files
You can name each directory using a PC.
The device is capable of displaying the di-
rectory name. Name the directories and
tracks/files using your CD burner software.
The software’s instruction manual will pro-
vide details on how to do this.
Note:
When naming directories and tracks/
files you should avoid using accents
and special characters.
If you like your files to be in the correct or-
der, you should use burner software that
places files in alphanumerical order. If your
software does not provide this feature you
also have the option of sorting the files
manually. For this purpose, you must en-
ter a number in front of each file name, e.g.
"001", "002", etc. The leading zeros must
also be entered.
MP3 tracks can contain additional infor-
mation such as the artist, album and track
names (ID3 tags). This device can display
ID3 tags (version 1).
When creating (encoding) MP3 files from
audio files, you should use bit rates up to a
maximum of 256 Kbit/sec.
This device can only play MP3 files that
have the ".MP3" file extension.
Notes:
To ensure uninterrupted playback,
do not try changing the file extension
to ".MP3" of any files other than MP3
files and then attempt to play them!
The device will ignore these invalid
files during playback.
Do not use "mixed" CDs containing
both non-MP3 data and MP3 tracks
(the device only reads MP3 files dur-
ing MP3 playback).
Do not use mix-mode CDs containing
bothCD-audiotracksandMP3tracks.
If you try playing a mix-mode CD, the
device will only play the CD-audio
tracks.
•
•
•
MP3/WMA mode
01_LondonMP37_us_gb.indd 2001_LondonMP37_us_gb.indd 20 12/8/06 3:48:49 PM12/8/06 3:48:49 PM