Blodgett BLT-30G User manual

Project
Item No.
Quantity
Model BLT-30G (30 gallon electric braising pan with manual tilt)
Model BLT-40G (40 gallon electric braising pan with manual tilt)
CONSTRUCTION
#4 finish 10 gauge stainless steel pan with polished interior
Coved corners
5/8” thick stainless steel clad plate
Side trunnions connected to gear and control consoles for tilting
Welded stainless steel tubular legs with bullet feet on front legs and
flanged adjustable feet on back legs
OPERATION
Integrally mounted controls
Ignition indicator light
Power switch
Thermostat
Cook indicator light
High temperature cut-off
100-450°F (38-232°C) temperature range
STANDARD FEATURES
Spring assist hinged stainless steel cover with handle
No drip condensate guide
Removable pour strainer
Manual control
120 VAC, 1 phase, 60 hz
One year parts and labor warranty*
* For all international markets, contact your local distributor.
BLODGETT
44 Lakeside Avenue, Burlington, VT 05401
Toll Free: [phone] • Phone: [phone] • Fax: [phone]
OPTIONS AND ACCESSORIES
(AT ADDITIONAL CHARGE)
Faucets
Single pantry faucet with swing spout
Double pantry faucet with swing spout
Etched markings
Gallons
Litres
Draw off valves
2” (50mm) draw off valve
3" (76mm) draw off valve
220 VAC, 1 phase, 60 Hz
Pan carrier
Steam pan insert
Correctional package
BLT-G
Gas Floor Model Braising Pan
with Manual Tilt
BLT-G BRAISING PAN WITH MANUAL TILT

BLODGETT
44 Lakeside Avenue, Burlington, VT 05401
Toll Free: [phone] • Phone: [phone] • Fax: [phone]
BLT-G GAS BRAISING PAN W/MANUAL TILT
SHORT FORM SPECIFICATIONS
Provide Blodgett model BLT-30G, 30 gallon (114 litre) or BLT-40G (152 litre) gas braising pan with manual tilt. The unit shall have a one-piece coved corner, 10 gauge stainless steel pan
with #4 exterior finish and polished interior. Cooking surface shall be 5/8” thick stainless clad plate ensuring even heat transfer over entire cooking surface. Pan shall pivot on side trun-
nions connected to the gear and control consoles. the consoles shall be drip proof, stainless steel clad and shall be supported by an all welded 1-5/8” (41mm) stainless steel pipe frame
with front legs fitted with adjustable bullet feet and rear legs fitted with flange adjustable feet for securing to the floor. The worm and gear tilt mechanism shall allow the pan to tilt forward
manually for complete emptying of contents. The controls shall be integrally mounted in the right hand console and shall include a power switch, thermostat with range of 100-450°F (38-
232°C), a cook indicator light, ignition indicator light, and high temperature cut-off. Provide options and accessories as indicated.
Printed in U.S.A. NOTE: FOR COMMERCIAL USE ONLY
NOTE: The company reserves the right to make substitutions of components without prior notice.
APPROVAL/STAMP
P/N S00034 Rev E (12/06)
MODEL A B C D E F G H
BLT-30G 49.5[1257] 37.25[959] 33.5[851] 24[610] 43.13[1095] 37.25[946] 10.5[267] 74.25[1886]
BLT-40G 58.5[1486] 38.88[988] 43.5[1105] 24[610] 51.75[1314] 37.25[946] 10.5[267] 74.25[1886]
MAXIMUM INPUT:
BLT-30G 80,000 BTU/hr
BLT-40G 100,000 BTU/hr
GAS SUPPLY:
1/2" IPS supply line required
Minimum Inlet Pressure:
Natural 7.0" W.C. static to unit
Propane 11.0" W.C. static to unit
POWER SUPPLY:
120VAC, 1 phase, 60 Hz., 2-wire w/ground
6' (1.8m) electric cord set furnished.
SHIPPING INFORMATION:
Approx. Weight:
BLT-30G 630 lbs. (286 kg)
BLT40G 740 lbs. (336 kg)