Blu Stream HDCP11AB User manual

HDCP11AB
User Manual
EDID HDMI Input DC 5V
Power

HDCP11AB USER MANUAL
02
www.blustream.co.uk
Surge protection device
recommended
This product contains sensitive electri-
cal components that may be damaged
by electrical spikes, surges, electric
shock, lightning strikes, etc. Use of
surge protection systems is highly
recommended in order to protect and
extend the life of your equipment.
Introduction
3
Features
3
Panel Descriptions
3-4
EDID Management
4
Application Diagram
5
Specifications
6
Package Contents
6
Maintenance
6
Contents
Thank you for purchasing
this product.
For optimum performance and safety,
please read these instructions care-
fully before connecting, operating or
adjusting this product. Please keep this
manual for future reference.

HDCP11AB USER MANUAL
03
contact [e-mail] / [e-mail]
Our HDCP11AB is designed to resolve HDCP 2.2 incompatibility issues.
The HDCP11AB converts the HDCP 2.2 input to a lower HDCP format allowing integration
of HDCP 2.2 source products to non-HDCP 2.2 compatible products (displays, AV receivers,
soundbars etc). The HDCP11AB also features in-built EDID management and has HDMI
de-embedding to extract audio from the HDMI input onto both analogue and Coaxial
digital outputs concurrently.
This solution prevents the need to upgrade all of your HDMI video components when a
HDCP 2.2 device is added to the system.
Introduction
FEATURES:
• Conversion of HDCP 2.2 to all lower HDCP formats.
• HDMI audio de-embedded to both analogue L/R audio and
Coaxial digital outputs concurrently.
• Supports all industry standard video resolutions including
VGA-WUXGA and 480i-4K.
• Support pass-through of all known HDMI audio formats
including Dolby TrueHD, Dolby Atmos, Dolby Digital Plus
and DTS-HD Master audio transmission.
• Advanced EDID management.
• Small compact size.
1HDMI Input - Connect to the HDMI source device.
2DC 5V - Connect to supplied 5V/1A power supply.
3EDID DIP Switches - EDID management (see page 4).
4Power LED indicator - Lit when unit is powered.
Front Panel
EDID HDMI Input DC 5V
Power
1
3
2
4

HDCP11AB USER MANUAL
04
www.blustream.co.uk
Rear Panel
1
3
2
4
3 2 1 0 EDID Type
Combination of DIP positions
0 0 0 0 Copy EDID from output
0 0 0 1 1080P 2.0CH
0 0 1 0 1080P 5.1CH
0 0 1 1 1080P 7.1CH
0 1 0 0 1080i 2.0CH
0 1 0 1 1080i 5.1CH
0 1 1 0 1080i 7.1CH
0 1 1 1 3D 2.0CH
1 0 0 0 3D 5.1CH
1 0 0 1 3D 7.1CH
1 0 1 0 4K 2.0CH
1 0 1 1 4K 5.1CH
1 1 0 0 4K 7.1CH
1 1 0 1 DVI 1280x1024
1 1 1 0 DVI 1920x1080
1 1 1 1 DVI 1920x1200
1HDMI LED indicator - Lit when detecting a HDMI
connection to a display/end point.
2Digital Coaxial Out—Extracted audio from the HDMI input.
3L/R Out Analogue Audio Out - Extracted audio from HDMI
input (Compatible with 2ch PCM only).
4HDMI Output - Connect to the HDMI display.
HDMI Output
Coaxial OutAnalog Out
HDMI Link
EDID Control
EDID (Extended Display Identification Data) is a data structure that
is used between a display and asource. This data is used by the
source to find out what audio and video resolutions are supported
by the display then from this information the source will determine
what the best resolution is to output.
While the objective of EDID is to make connecting adigital display
to a source a simple plug and play procedure issues do arise when
multiple displays or video matrix switching is introduced because
of the increased number of variables.
By pre-determining the video resolution and audio format of
the source and display device you can potentially work around
compatibility issues associated with some display and source
combinations.
To change the EDID settings move the EDID dip-switches as
required on the front panel of the unit. Please see adjacent
table for settings.
Note: You must power-cycle the HDCP11AB aer changes
have been made in order for the EDID settings to update.

HDCP11AB USER MANUAL
05
contact [e-mail] / [e-mail]
Example Schematic HDCP11AB
MAXIMUM OF 1 SOURCE
HDCP 2.2 source device
Non HDCP 2.2 display
HDMI Stereo Audio
EDID HDMI Input DC 5V
Power
HDMI Output
Coaxial OutAnalog Out
HDMI Link
DISPLAY

HDCP11AB USER MANUAL
06
www.blustream.co.uk
Specifications
Video Input Connectors: 1x HDMI Type A, 19-pin, female
Video Output Connectors: 1x HDMI Type A, 19-pin, female
Audio Output Connectors: 1x SPDIF Coaxial digital, 1x 3.5mm stereo
analogue audio (L/R)
EDID: 4-PIN DIP Switch
Dimensions (W x D x H): 55mm x 60mm x 23mm, without feet
Shipping Weight: 0.5 KG
Operating Temperature: 32°F to 104°F (0°C to 40°C)
Storage Temperature: - 4°F to 140°F (- 20°C to 60°C)
Power Supply: 5V/1A DC
Package Contents:
• 1x HDCP11AB
• 1x 5V/1A DC power supply
• 1x Mounting kit
Maintenance
Clean this unit with a so, dry cloth. Never use alcohol,
paint thinner or benzene to clean this unit.
www.blustream.co.uk
www.blustream.com.au

www.blustream.co.uk
www.blustream.com.au