Blu Stream SC11HD-V2 User manual

HDMI Output L/R Out Upgrade
Coaxial
Out
Link
Mode
3 2 1
1
0
0
DC 5V
L/R In HDMI Input EDID
Power Link
3 2 1
1
0
0
SC11HD-V2
User Manual

SC11HD-V2 USER MANUAL
02 www.blustream.co.uk
Introduction 3
Features 3
Panel Descriptions 4
EDID Management 5
Mode Management 5
Application Diagram 6
Specifications 7
Package Contents 7
Maintenance 7
Contents
Surge protection device
recommended
This product contains sensitive
electrical components that may be
damaged by electrical spikes, surges,
electric shock, lightning strikes, etc. Use
of surge protection systems is highly
recommended in order to protect and
extend the life of your equipment.
Safety And
Performance Notice
Do not substitute or use any other
power supply other than the enclosed
unit, or a Blustream approved
replacement.
Do not disassemble either the
Transmitter or Receiver units for
any reason. Doing so will void the
manufacturer’s warranty.
Thank you for purchasing
this product.
For optimum performance and safety,
please read these instructions carefully
before connecting, operating or
adjusting this product. Please keep this
manual for future reference.

SC11HD-V2 USER MANUAL
03
contact [e-mail] / [e-mail]
Our Blustream SC11HD-V2 is a HDMI 4K scaler, designed for installations with multiple
displays that support dierent maximum video resolutions. The SC11HD-V2 is ideal for
installations with muliple output resolution requirements.
The SC11HD-V2 supports down-scaling of 4K video to 1080P and supports HDCP 2.2 with
advanced EDID management. It also features either de-embedding or embedding audio
within the HDMI signal path.
Introduction
FEATURES:
• HDMI 4K video scaler
• Supports 4K UHD video input (3840 x 2160 @30Hz 4:4:4 with HDR) 3840 x 2160 @ 50/60Hz 4:2:0)
• HDMI output will downscale 4K@24/25/30Hz 4:4:4 to 1080P@24/25/30Hz, and 4K@24/25/30/50/60Hz 4:2:0 to 1080P@ 24/25/30 /50/60Hz
• Supports 10-bit HDR10
• Can be configured to work as either a HDMI audio de-embedder or audio embedder
• HDMI audio de-embedded to both analogue L/R audio and coaxial digital outputs concurrently (2CH PCM only)
• Embed analogue L/R 2CH audio input onto HDMI output
• Supports all known HDMI audio formats including Dolby TrueHD, Dolby Atmos, Dolby Digital Plus and DTS-HD Master Audio transmission
• Advanced EDID management
• HDCP 2.2 support
• CECandARCpassthrough

SC11HD-V2 USER MANUAL
04 www.blustream.co.uk
HDMI Output L/R Out Upgrade
Coaxial
Out
Link
Mode
3 2 1
1
0
0
DC 5V
L/R In HDMI Input EDID
Power Link
3 2 1
1
0
0
Rear Panel
7 8
Front Panel
1 2
Connections:
1MODE dip-switches - adjust the MODE setting for HDMI output - see page 5 for further details
2HDMI output - connect to a HDMI display / end point
3HDMI LED indicator - lit when there is an active HDMI connection to a display / end point
4Le/Right Analogue Audio Output 3.5mm stereo jack - Extract audio from HDMI input source
NOTE: Source audio must be PCM 2 channel.
5Coaxial Digital Output - used when audio is de-embedded from HDMI
6Micro USB port - used for firmware upgrade only
Connections:
7Power connection – use supplied 5V 1A DC adaptor
8Le/Right Analogue Audio Input
9HDMI input - connecto to source device
qHDMI LED indicator - lit when there is an active HDMI connection from source device
wEDID dip-switches - adjust the EDID setting for source input - see page 5 for further details
9 11
3 4 5 6
HDMI Output L/R Out Upgrade
Coaxial
Out
Link
Mode
3 2 1
1
0
0
DC 5V
L/R In HDMI Input EDID
Power Link
3 2 1
1
0
0
10

SC11HD-V2 USER MANUAL
05
contact [e-mail] / [e-mail]
3 2 1 0 EDID Type
Combination of DIP positions
0 0 0 0 Copy EDID from output
0 0 0 1 1080p 2.0ch
0 0 1 0 1080p 5.1ch
0 0 1 1 1080p 7.1ch
0 1 0 0 1080i 2.0ch
0 1 0 1 1080i 5.1ch
0 1 1 0 1080i 7.1ch
0 1 1 1 4K60Hz 4:2:0 2.0CH
1 0 0 0 4K60Hz 4:2:0 5.1CH,
1 0 0 1 4K60Hz 4:2:0 7.1CH
1 0 1 0 4K30Hz 4:4:4 2.0CH
1 0 1 1 4K30Hz 4:4:4 5.1CH
1 1 0 0 4K30Hz 4:4:4 7.1CH
1 1 0 1 DVI 1280x1024
1 1 1 0 DVI 1920x1080
1 1 1 1 DVI 1920x1200
EDID Management
EDID (Extended Display Identification Data) is a data
structure that is used between a display and a source.
This data is used by the source to find out what audio
and video resolutions are supported by the display then
from this information the source will determine what
the best resolution is to output.
While the objective of EDID is to make connecting
a digital display to a source a simple plug and play
procedure issues do arise when multiple displays or
video matrix switching is introduced because of the
increased number of variables.
The SC11HD-V2 will act as an ‘end point’ in the HDMI
signal path. Using the EDID dip-switches pre-determins
the video resolution and audio format of the source
regardless of the video output resolution that the
SC11HD-V2 scales to.
To change the EDID settings move the EDID dip-
switches as required on the front panel of the unit.
Please see adjacent table for settings.
Note: You must power-cycle the SC11HD-V2 aer
changes have been made in order for the EDID settings
to update.
3210Mode Settings
Combination of DIP positions
1x x 0 Always convert 4K formats to 1080P
0x x 0 Auto convert 4K formats to 1080P when the device detects the display cannot support 4K
x1x 0 HDCP follows the source device
x0x 0 HDCP follows the display device
x x 10 Audio embed mode - embeds the analogue le/right audio onto the HDMI signal
x x 00 Audio bypass mode - allows HDMI audio to pass through
xxx1Mode control by serial USB
xxx0Mode control by DIP switch
Note: You must power-cycle the SC11HD-V2 aer changes have been made in order for the Mode settings to update.
The SC11HD-V2 cannot up-scale to 4K video formats.
Mode Management

SC11HD-V2 USER MANUAL
06 www.blustream.co.uk
Example Schematic SC11HD-V2
HDMI
Coaxial Digital Cable
Speaker Cable
Analogue Audio Cable
4K SOURCE
Non 4K Display
Down-scaled video output
HDMI Output L/R Out Upgrade
Coaxial
Out
Link
Mode
3 2 1
1
0
0
DC 5V
L/R In HDMI Input EDID
Power
Link
3 2 1
1
0
0

SC11HD-V2 USER MANUAL
07
contact [e-mail] / [e-mail]
Specifications
Audio Input Connectors: 1x Analogue Le/Right audio (3.5mm stereo jack)
Audio Output Connectors: 1x RCA (SPDIF) & 1x Analogue Le/Right audio (3.5mm stereo jack)
Video Input Connectors: 1x HDMI Type A, 19-pin, female
Video Output Connectors: 1x HDMI Type A, 19-pin, female
EDID: 4-PIN DIP Switch
MODE: 4-PIN DIP Switch
Product upgrade: 1x Female Micro USB
Dimensions including connections (W x H x D): 83mm x 15mm x 83mm
Shipping Weight: 0.5kg
Operating Temperature: 32°F to 104°F (0°C to 40°C)
Storage Temperature: - 4°F to 140°F (- 20°C to 60°C)
Power Supply: 5V/1A DC
Package Contents:
• 1x SC11HD-V2
• 1x 5V/1A DC power supply
• 1x Mounting kit
• 1x Quick Reference Guide
Maintenance
Clean this unit with a so, dry cloth. Never use alcohol, paint thinner or benzene to clean this unit.

www.blustream.co.uk
www.blustream.com.au