BluDot Hush Bed Quick start guide

Hush Bed Collection
DESIGNED IN 2011
ASSEMBLY NOTES | REV 00
@BLUDOT
We design all our pieces in our Minneapolis studio. Follow
along on Instagram for some sneak peeks into the process.
NEED A HAND?
Contact us at [email protected] or
844.425.8368 for assistance.

1 | 844.425.8368 HUSH BED COLLECTION
Pt. 3003
Pt. 1049
Pt. 5005
Center Rail
*Twin bed size will come with reduced part quantities.
Support Rail
Slip Cover
Center Leg
Corner Bracket
Pt. 3009
Pt. 1047
Pt. 3004
Pt. 9004
Pt. 1045
Pt. 9001
4
16
2
1* 1
1
1*
2
34*
4
4
16
18*
1
QTY
QTY
QTY
QTY QTY
QTY
QTY
QTY
QTY
QTY
QTY
QTY
QTY
QTY
Parts & Hardware

[e-mail] |2ASSEMBLY NOTES
Footboard
Leg Frame
Left Side Rail
Slats
Right Side Rail
Headboard
1
1
1
1
1
1
QTY
QTY
QTY
QTY
QTY
QTY
PT. 3009 x 8PT. 1049 x 8PT. 9004 x 1
Parts & Hardware
Step 01
ATTACH LEG FRAME.
Assemble the bed on a soft, clean
surface with the assistance of
another individual.
Attach leg frames to left side rail
using provided hardware as shown.
Ensure that the legs angle outwards.

3 | 844.425.8368 HUSH BED COLLECTION
PT. 3009 x 8
PT. 3009 x 4
PT. 1049 x 8
PT. 1045 x 4
PT. 9004 x 1
PT. 9004 x 1
Center rail bracket
Step 02
ATTACH RIGHT SIDE RAIL.
Attach right side rail using provided
hardware as shown.
Step 03
ATTACH SUPPORT RAIL.
Attach support rail using provided
hardware as shown. Ensure that the
center rail bracket is facing inwards
on full, queen, and king size beds.

[e-mail] |4ASSEMBLY NOTES
PT. 3009 x 12 PT. 1045 x 12 PT. 9004 x 1
Step 04
ATTACH FOOTBOARD.
Attach corner brackets to footboard and
secure footboard in place using provided
hardware as shown. Do not fully tighten the
hardware until all of the bolt locations are
aligned.

5 | 844.425.8368 HUSH BED COLLECTION
PT. 3004 x 4PT. 3003 x 4PT. 1047 x 4PT. 5005 x 2PT. 9001 x 1
Step 05
ATTACH HEADBOARD
Unzip the back of the headboard to access
the bolt locations. Attach headboard and to
siderails using provided hardware as shown.

[e-mail] |6ASSEMBLY NOTES
PT. 3009 x 2* PT. 1045 x 2* PT. 9004 x 1
Step 06
ATTACH CENTER RAIL.
Attach center leg to center rail using provided
hardware as shown. Place center rail in
brackets located on the support rail and
footboard as shown.Turn adjustable glides on
center legs clockwise or counterclockwise as
needed to level bed.
Note:Twin beds will not have a center rail/leg.
Step 07
ATTACH SLIP COVER.
Starting at the headboard, secure hook and
loop fasteners between side frame rails
and headboard. Continue toward footboard
keeping edges smooth and in line with frame
edges.

BLU DOT DESIGN & MANUFACTURING, INC. DESIGNED IN MINNEAPOLIS, MN
Additional Information
CLEAN
Vacuum your upholstery regularly.
SPILLS
Act quickly with spills. Absorb the spill with a clean white
cloth or paper towel. Never rub the surface. Do not use water or other liquids to clean, as they may stain the
fabric. Consult a commercial cleaning specialist for removal of stubborn stains.
AVOID
Keep upholstery & felt furniture out of direct sunlight and away from heat sources; excessive exposure
to sunlight may fade the color of the upholstery. Avoid placing heavy or sharp objects on the furniture
surface for long periods of time; this can cause permanent indentations in the fabric. For snags in the
fabric,
tuck loose threads into fabric or carefully push to reverse side.
Never pull out or cut off loose threads.
Step 08
ATTACH SLATS.
Starting at the headboard, unroll slats along
frame. Ensure first and last slat are secured by
metal blocking.