BluDot MODULICIOUS 6 LOW DRESSER User manual

WWW.BLUDOT.COM MODULICIOUS 6 LOW DRESSER rev03 - PAGE 1 OF 6
HARDWARE
MODULICIOUS
ASSEMBLY INSTRUCTIONS
#6 - LOW DRESSER
modular and stylish,
who knew?
CARE
Clean with a slightly damp,
soft cloth. To remove dirt
and fingerprints, use a
quality cleaner formulated
for wood furniture. Wipe
completely dry with a soft
cloth in the direction
of the wood grain.
PARTS LIST
Top Panel Side Panel Partition Panel
Drawer Slide
Bottom Panel
Back Panel Drawer
Foot
panel
has notched
edge on
both sides
panel has
pre-drilled
holes on
both sides
x2
x1 x1 x2
x1
x2
x12
x6
x24
5002
x24
5001
x24
1023
x4
4005
x4
8018
x1
4015
Stretcher
x1
x24
5005

WWW.BLUDOT.COM MODULICIOUS 6 LOW DRESSER rev03 - PAGE 2 OF 6
132 5
4
Turn cam clockwise
½ turn
HOW TO USE CAM
LOCK HARDWARE
Note direction of
arrow on cam
Note direction of
arrow on cam

WWW.BLUDOT.COM MODULICIOUS 6 LOW DRESSER rev03 - PAGE 3 OF 6
1 2
ASSEMBLE ON
CARPET OR
PROTECTIVE MAT
x4x4
5001 5002
See page 2:
HOW TO USE CAM
LOCK HARDWARE
Finished edge
Finished edge
x2 x1 x4x2
5001 5002 4015 4005

WWW.BLUDOT.COM MODULICIOUS 6 LOW DRESSER rev03 - PAGE 4 OF 6
34
First screw
goes here
x24
5002
Make sure
notched edges
are at the rear
Panels will have a
smaller distance
from drawer slide to
bottom edge
as shown.
LG
SM
Repeat this step for
opposite side panel
and both sides of
partition panel.
x9
5001 x9 50025005
x12

WWW.BLUDOT.COM MODULICIOUS 6 LOW DRESSER rev03 - PAGE 5 OF 6
56
x4
8018
x9
5001 x9 50025005
x12

WWW.BLUDOT.COM MODULICIOUS 6 LOW DRESSER rev03 - PAGE 6 OF 6
7NOTES
To remove drawers
pull lever up on the
right side and push
down on the left side
of the ball bearing
drawer slide.
Drawer fronts can
be adjusted if
drawer gaps are
inconsistent.
Loosen the acorn
nuts, shift the drawer
front into place and
ask a friend to hold the
drawer front in place
while you re-tighten
the nuts (but don’t
over tighten)
Repeat for
remaining
drawers.