BluDot Chicago Lowboy User manual

Chicago Lowboy
DESIGNED IN 1997
ASSEMBLY NOTES | REV 02
NEED A HAND?
Contact us at [email protected] or
844.425.8368 for assistance.
COMPELLING NEGATIVE SPACE--LIKE A GAP TOOTH.
Sometimes good design is about what’s not there. The Chicago series
takes advantage of negative space, creating smart, elegent storage.

1 | 8 4 4 . 4 2 5 . 8 3 6 8 CHICAGO LOWBOY
2
Post Side Panel
4QTY QTY
Back Panel Bottom Panel
2 1QTY QTY
Top Panel Shelf Panel
1 1QTY QTY
Parts & Hardware

[e-mail] | 2ASSEMBLY NOTES
Pt. 8046
2QTY
Pt. 1217
QTY 2
Pt. 1218
2QTY
8042
Anti-tip Strap
Pt. 8042
1QTY
Pt. 5001
24QTY
Pt. 1001
16QTY
Pt. 1207
QTY
Pt. 5002
24QTY4
Pt. 5005
20QTY
Pt. 8001
8QTY
Pt. 8002
8QTY
Parts & Hardware

3 | 8 4 4 . 4 2 5 . 8 3 6 8 CHICAGO LOWBOY
354
1 2
How to use the cam lock system
Note direction of cam arrow. Turn cam clockwise 1/2 turn or until tight. Note direction of cam arrow.

[e-mail] | 4ASSEMBLY NOTES
PT. 5001 X 2
PT. 5002 X 2
Shelf Panel
Back Panel
Step 01
ATTACH BACK PANEL.
Attach the back panel to the shelf panel using
the provided hardware as shown. Refer to page
3 on how to use the cam lock system.

5 | 8 4 4 . 4 2 5 . 8 3 6 8 CHICAGO LOWBOY
PT. 5001 X 4 PT. 5005 X 4 PT. 5002 X 4
Step 02
BEGIN ASSEMBLING CASE.
Attach side panel to shelf and back panels
as shown using the provided hardware.
Refer to page 3 on how to use the cam lock
system.

[e-mail] | 6ASSEMBLY NOTES
PT. 5001 X 2 PT. 5005 X 2 PT. 5002 X 2
Step 03
ATTACH BACK PANEL.
Attach the back panel using the provided
hardware as shown. Refer to page 3 on how
to the cam lock system.

7 | 8 4 4 . 4 2 5 . 8 3 6 8 CHICAGO LOWBOY
PT. 5001 X 6 PT. 5005 X 6 PT. 5002 X 6
Side Panel
Step 04
ATTACH SIDE PANEL.
Attach side panel as shown using the provided
hardware. Refer to page 3 on how to use the
cam lock system.

[e-mail] | 8ASSEMBLY NOTES
PT. 5001 X 4 PT. 5005 X 4 PT. 5002 X 4 PT. 8002 X 4PT. 1207 X 4
Top Panel
Step 05
ATTACH TOP PANEL.
Attach the top panel using the provided
hardware as shown. Refer to page 3 on how
to the cam lock system.

9 | 8 4 4 . 4 2 5 . 8 3 6 8 CHICAGO LOWBOY
PT. 5001 X 6 PT. 5005 X 4 PT. 5002 X 6
Bottom Panel
Step 06
ATTACH BOTTOM PANEL.
Attach the bottom panel using the provided
hardware as shown. Refer to page 3 on how to
the cam lock system

[e-mail] | 10ASSEMBLY NOTES
PT. 8002 X 4
Step 07
INSERT POST.
Partially insert posts as shown.

11 | 8 4 4 . 4 2 5 . 8 3 6 8 CHICAGO LOWBOY
PT.1001 X 16 PT. 8001 X8
Step 08
SECURING THE POST.
Install hardware as shown. Once completed,
finish installing posts.

[e-mail] | 12ASSEMBLY NOTES
PT. 8046 x 1PT. 1218 x 2
Step 09
ATTACH ANTI-TIP BRACKET TO THE WALL.
Install anti-tip bracket to wall stud 1-inch
below case top panel height.
1” lower than
case top
Side Panel
Wall

13 | 8 4 4 . 4 2 5 . 8 3 6 8 CHICAGO LOWBOY
PT. 8046 x 1PT. 1217 x 2
Top
Back
Panel
Step 10
INSTALL ANTI-TIP BRACKET TO CASE.
Bracket must be installed to top panel
of case. In order to prevent damage, it is
recommended that 3/32” pilot holes be
drilled prior to installation.
Rear of Case

[e-mail] | 14ASSEMBLY NOTES
8042
Anti-tip Strap
PT. 8042 x 1
Step 11
SECURE THE CASE.
Install and tighten the strap
prior to using the product.

BLU DOT DESIGN & MANUFACTURING, INC. DESIGNED IN MINNEAPOLIS, MN
Additional Information
CLEAN
Clean with a slightly damp, soft cloth. To remove dirt
and fingerprints, use a quality cleaner formulate for
wood furniture. Wipe completely dry with a soft cloth
in the direction of the wood grain.