BluDot Hunker Bed HU1-KINGBD-GY Quick start guide

Hunker Bed
DESIGNED IN 2016
ASSEMBLY NOTES | REV 02
NEED A HAND?
Contact us at [email protected] or
844.425.8368 for assistance.
HUNK A HUNK OF BURNING LOVE.
Surround yourself with serenity with Hunker. Integrated nightstands team up with
an enveloping headboard providing a safe space for all your nocturnal endeavors.

1 | 844.425.8368 HUNKER BED
Footboard Rail
1QTY
Pt. 1678
14QTY
Pt. 3001
20QTY
Pt. 3002
20QTY
Pt. 1679
8QTY
Pt. 3005
8QTY
Pt. 3007
8QTY
Pt. 1603
6QTY
Pt. 9016
1QTY
Pt. 9017
1QTY
Parts & Hardware

[e-mail] |2ASSEMBLY NOTES
Center Rail
1QTY
Side Rail - Left
1QTY
Side Rail - Right
1QTY
Headboard - Left
1QTY
Headboard - Right
1QTY
Ledger Board
1QTY
Nightstand Panel
2QTY
Center Foot
1QTY
Slipcover
1QTY
Footboard
1QTY
Slats
2QTY
Nightstand Bracket
2QTY
Parts & Hardware

3 | 844.425.8368 HUNKER BED
PT. 1679 x 4PT. 3005 x 4PT. 3007 x 4PT. 9017 x 1
Step 01
ASSEMBLE HEADBOARD.
Place headboard sections on their back. With
2 people assemble the headboard as shown
using the pre-attached lock tabs.
Step 02
ATTACH LEDGER BOARD.
Attach the ledger board as shown using the
provided hardware.

[e-mail] |4ASSEMBLY NOTES
PT. 1678 x 4PT. 3001 x 4PT. 3002 x 4PT. 9016 x 1
adjustable
Step 03
ASSEMBLE CENTER SUPPORT.
Assemble the center support as shown using
the provided hardware.
NOTE:The called out attachment points
provide adjustability during step 05.

5 | 844.425.8368 HUNKER BED
Step 04
ATTACH CENTER SUPPORT.
With 2 people, place the headboard upright.
Attach center support to headboard using the
pre-attached drop-in connector.
NOTE:Move the side rails into position as
shown on the floor to aid in step05 assembly.

[e-mail] |6ASSEMBLY NOTES
PT. 1679 x 4PT. 3005 x 4PT. 3007 x 4PT. 9017 x 1
PT. 1678 x 4PT. 3001 x 4PT. 3002 x 4PT. 9016 x 1
PT. 1679
adjustable
PT. 1678
Step 05
ATTACH SIDE RAILS.
Attach the side rails as shown using the
provided hardware.
NOTE:The called out attachment points can be
temporarily loosened to aid in center support
attachment. Fully tighten all bolts before
moving to step06.

7 | 844.425.8368 HUNKER BED
Step 06
ATTACH FOOTBOARD.
Attach footboard as shown using the
pre-attached connectors.

[e-mail] |8ASSEMBLY NOTES
Start here.
Start here.
Step 08
INSTALL SLATS.
Starting at the headboard,
install slats as shown.
Step 07
ATTACH SLIPCOVER.
Starting at the footboard, align the
slipcover corner seams. Continue
attaching the slipcover as shown.

9 | 844.425.8368 HUNKER BED
PT. 1678 x 6PT. 3001 x 6PT. 3002 x 6PT. 9016 x 1
Step 09
ATTACH NIGHTSTAND BRACKETS.
Attach nightstand brackets as shown
using the provided hardware.

[e-mail] |10ASSEMBLY NOTES
PT. 1603 x 6PT. 3001 x 6PT. 3002 x 6PT. 9016 x 1
Step 10
ATTACH NIGHTSTAND PANELS.
Attach nightstand panels to brackets as
shown using the provided hardware.

BLU DOT DESIGN & MANUFACTURING, INC. DESIGNED IN MINNEAPOLIS, MN
CLEAN
Vacuum your upholstery regularly.
SPILLS
Act quickly with spills. Absorb the spill with a clean white cloth or paper towel. Never rub the surface.
Do not use water or other liquids to clean, as they may stain the fabric. Consult a commercial cleaning
specialist for removal of stubborn stains.
AVOID
Keep upholstery & felt furniture out of direct sunlight and away from heat sources; excessive exposure
to sunlight may fade the color of the upholstery. Avoid placing heavy or sharp objects on the furniture
surface for long periods of time; this can cause permanent indentations in the fabric. For snags in the
fabric, tuck loose threads into fabric or carefully push to reverse side. Never pull out or cut off loose
threads.
Additional Information
POWER CORD MANAGEMENT.
The headboard and nightstand brackets
have integrated power cord management
cutouts. Thread the power cord through the
bracket cutout as shown. Once threaded push
the power cord out through the back of the
headboard.