Home Styles 88 5062 501 User manual

IMPORTANT NOTE
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damage occurring to the parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure a
completed product as it was designed.
Part List
Home Styles ConsumerAssistance: www.homestyles-furniture.com,
[email protected], 888-680-7460, 877-831-0319
Hardware List
88 5062 501
Queen Headboard
Tools required for assembly : Phillips screwdriver
Hex Wrench
1 Pc.
Small Hex Wrench
1 Pc.
M6x16
Head Cap Bolt
8 Pcs.(+1 extra)
M6x32
Tapered Head Cap Bolt
6 Pcs.(+1 extra)
M4x13
Wood Screw
8 Pcs.(+1 extra)
Flat Washer
8 Pcs. (+1 extra)
A.
Frame
1 Pc.
B.
Headboard
1 Pc.
C.
Stretcher
1 Pc.
D.
Stretcher
1 Pc.
E.
Post
1 Pc.
F.
Post
1 Pc.
G.
Upright
2 Pcs.

Assembly Instructions 2
IMPORTANT
* Please keep Hex Wrench in a safe place as you may need to tighten up the Head Cap Bolts in the future.
* Do not tighten up all the bolts until each part is properly assembled.
* Use a soft cloth between these parts and the floor.
STEP 1
Attach Posts (E) and (F) to Stretchers
(C) and (D) with Flat Washers,
Head Cap Bolts and
Tapered Head Cap Bolts.
(See Figure 1 and 2)
Attach Uprights (G) to unit with
Tapered Head Cap Bolts.
Attach Frame (A) to unit with
Flat Washers and Head Cap Bolts.
STEP 2
Attach Headboard (B) to unit with Wood Screws.
E
F
C
D
A
B
G
G
Figure 1 Figure 2
/2
Tapered Head Cap Bolt
Wood Screw
Head Cap Bolt
Flat Washer