BluDot Station Bed User manual

Station Bed
DESIGNED IN 2013
ASSEMBLY NOTES | REV 00

1 | 844.425.8368 STATION BED
Left side rail
End rails
1
2
QTY
QTY
Right side rail
Headboard rail
1
1
QTY
QTY
Center rail
Headboard
1
1
QTY
QTY
Pt. 1080
14QTY
Pt. 9004
1QTY
Pt. 9001
1QTY
Pt. 1079
6*QTY
Pt. 3006
14QTY
Bed slats
2QTY
Pt. 3005
QTY 14
Center foot
QTY 1
*King bed ships with x7 Pt.1079
Parts & Hardware

[e-mail] | 2ASSEMBLY NOTES [e-mail] | 2ASSEMBLY NOTES
PT. 3005 X 8
PT. 1080 X 8
PT. 3006X 8
PT. 9001 X 1
A
A
B
B
B
Back end
rail has
extra bolt
holes
Step 01
ASSEMBLE RAILS.
Loosely attach the side rails to the end rails.
Be sure to note the position of the front and
back end rails.
match bracket orientation as shown

3 | 844.425.8368 STATION BED
Pt. 1080 x 6Pt. 3005 x 6Pt. 3006 x 6Pt. 9001 x 1
Step 02
ATTACH HEADBOARD SUPPORT.
Attach the headboard support rail to the
frame.
Tighten all hardware.

[e-mail] | 4ASSEMBLY NOTES
PT. 1079 x 2PT. 9004 x 1
Step 03
ASSEMBLE THE CENTER RAIL.
Attach the center foot to the center rail as
shown.

5 | 844.425.8368 STATION BED
Step 04
INSTALL CENTER RAIL.
Attach the center rail by setting it into the
center rail brackets.

[e-mail] | 6ASSEMBLY NOTES
PT. 1079 X 4*
PT. 9004 X 1
A
A
Additional
Attachment
point for king
beds
Step 05
ATTACH THE HEADBOARD.
*The king size headboards have an additional
attachment point and hardware.

BLU DOT DESIGN & MANUFACTURING, INC. DESIGNED IN MINNEAPOLIS, MN
Start here.
Additional Information
CLEAN
Vacuum your upholstery regularly.
SPILLS
Act quickly with spills. Absorb the spill with a clean white cloth or paper towel. Never rub the surface.
Do not use water or other liquids to clean, as they may stain the fabric. Consult a commercial cleaning
specialist for removal of stubborn stains.
AVOID
Keep upholstery & felt furniture out of direct sunlight and away from heat sources; excessive exposure
to sunlight may fade the color of the upholstery. Avoid placing heavy or sharp objects on the furniture
surface for long periods of time; this can cause permanent indentations in the fabric. For snags in the
fabric, tuck loose threads into fabric or carefully push to reverse side. Never pull out or cut off loose
threads.
Step 06
INSTALL THE BED SLATS.
Starting from the foot of the bed, align the first
slat in between the rail and metal notch.
Stretch slats toward the headboard and place
the last slat between the metal notch and
headboard.