BluDot Modu-licious #1 Quick start guide

Modu-licious #1
DESIGNED IN 1999
ASSEMBLY NOTES | REV 00
NEED A HAND?
Contact us at [e-mail]
844.425.8368for assistance.
KEEP THE S TUFFYOU LIKE AND S T O RE I T WELL .
Drawers and doors are your canvas with the award-winning
Modu-licious series.

1 | 8 4 4 . 4 2 5 . 8 3 6 8 MODU-LICIOUS # 1
Pt. 5001
18QTY
Pt. 1023
8QTY
Pt. 4005
QTY
Pt. 8018
2QTY4
Pt. 5002
18QTY
Pt. 5005
16QTY
foot
QTY
Drawer Slide
4QTY2
Stretcher
1QTY
Top Panel
1QTY
Bottom Panel
1QTY
Back Panel
1QTY
Side Panel
2QTY
Drawer
2QTY
Parts & Hardware

S E RVIC E @ B L U DOT . C O M | 2A S SEM B L Y NOTES
354
12
How to use the cam lock system
Note direction of cam arrow. Turn cam clockwise 1/2 turn or until tight. Note direction of cam arrow.

3 | 8 4 4 . 4 2 5 . 8 3 6 8 MODU-LICIOUS # 1
PT. 5001 x 2 PT. 5002 x 2 PT. 4005 x 4
Step 01
ASSEMBLE BASE .
Using the stretcher and feet assemble the
base as shown. Refer to page 2 on how to
use the cam lock system.

S E RVIC E @ B L U DOT . C O M | 4A S SEM B L Y NOTES
PT. 5001x 4 PT. 5002x 4
Bottom Panel
Step 02
AT TA CH B O T T O M PANEL .
Attach the bottom panel to the base using
the provided hardware as shown. Refer to page
2 on how to use the cam lock system.

5 | 8 4 4 . 4 2 5 . 8 3 6 8 MODU-LICIOUS # 1
PT. 1023 X 8
Left Side Panel
Step 03
AT TA CH DRAWER SLIDES.
Attach drawer slides to side panel
as shown using provided hardware.
Repeat for right panel

S E RVIC E @ B L U DOT . C O M | 6A S SEM B L Y NOTES
PT. 5001 x 6 PT. 5002x 6 PT. 5005 x 8
Step 04
BEGIN ASSEMBLING C A S E .
Attach side panels to base as shown using
the provided hardware. Be sure to align
grooves. Refer to page 2 on how to use
the cam lock system.

7 | 8 4 4 . 4 2 5 . 8 3 6 8 MODU-LICIOUS # 1
PT. 8018 X 2
Step 05
INSER T B A CK PANEL S .
Add rubber grommets to panel as shown.
Insert back panels into grooves in case.

S E RVIC E @ B L U DOT . C O M | 8A S SEM B L Y NOTES
PT. 5001 x 6 PT. 5002x 6 PT. 5005 x 8
Step 06
AT TA CH THE TO P.
Attach top panel as shown using the provided
hardware. Refer to page 2 on how to use cam
lock system.

9 | 8 4 4 . 4 2 5 . 8 3 6 8 MODU-LICIOUS # 1
Step 07
INS TA LL DRAWERS.
To install the drawers extend drawer slides out
from case, align with drawer slides as shown,
and slide drawer in. Be sure to push until
drawer is completely closed and engaged.

S E RVIC E @ B L U DOT . C O M | 10A S SEM B L Y NOTES
Additional Information
CLEAN
Clean with a slightly damp, soft cloth. To remove dirt and fingerprints, use a quality cleaner formulate
for wood furniture. Wipe completely dry with a soft cloth in the direction of the wood grain.
TO REMOVE DRAW ERS
Pull lever up on the right side and push down on the left side
of the drawer slide. With levers engaged pull drawer out.
TO ADJU ST DRAWER FRONTS
Loosen the acorn nuts, adjust drawer
front, re-tighten acorn nuts.

B L U DOT DESIGN & MANUFA C TURING,INC . DESIGNED IN MINNEAPOLIS,M N