BluDot Chicago 8 Box Quick start guide

Chicago 8 Box
DESIGNED IN 1997
ASSEMBLY NOTES | REV 00
NEED A HAND?
Contact us at [email protected] or
844.425.8368 for assistance.
START A BETTER COLLECTION.
Sometimes, good design is about what’s not there. The Chicago series
takes advantage of negative space, creating smart, elegant storage.

1 | 8 4 4 . 4 2 5 . 8 3 6 8 CHICAGO 8 BOX
Pt. 8002
8QTY
Pt. 5001
64QTY
Pt. 1001
QTY
Pt. 8001
32QTY64
Back Panel
8QTY
Horizontal Panel
16QTY
Side Panel
16QTY
Pt. 1218
4QTY
Pt. 8042
2QTY
3 Hole Post
QTY
5 Hole Post
4QTY4
Pt. 5005
64QTY
Pt. 5002
64QTY
Pt. 1217
QTY
Pt. 8041
4QTY4
8042
Anti-tip Strap
8041
Anti-tip Bracket
Parts & Hardware

[e-mail] | 2ASSEMBLY NOTES
354
1 2
How to use the cam lock system
Note direction of cam arrow. Turn cam clockwise 1/2 turn or until tight. Note direction of cam arrow.

3 | 8 4 4 . 4 2 5 . 8 3 6 8 CHICAGO 8 BOX
PT. 5001 X 4 PT. 5005 X 4 PT. 5002 X 4
Side Panel
Horizontal Panel
Side Panel
Step 01
BEGIN ASSEMBLING CASE.
Attach side panels to horizontal panel as shown
using the provided hardware. Be sure to align
grooves on horizontal panel and side panels.
Refer to page 2 on how to use the cam lock system.

[e-mail] | 4ASSEMBLY NOTES
PT. 5001 X 4 PT. 5005 X 4 PT. 5002 X 4
Horizontal Panel
Step 03
FINISH ASSEMBLING CASE.
Finish assembling the case as shown. Repeat
steps 01-03 for remaining cases. Refer to page
2 on how to use the cam lock system.
Step 02
INSERT BACK PANEL.
Insert back panel into grooves in case.

5 | 8 4 4 . 4 2 5 . 8 3 6 8 CHICAGO 8 BOX
PT. 8002 X 8 PT. 8001 X 8 PT. 1001 X 16
5 Hole Post
3 Hole Post
Step 04
ASSEMBLING THE POSTS.
Assemble the posts as shown using the
provided hardware. Repeat step 04 for
remaining posts.

[e-mail] | 6ASSEMBLY NOTES
Turn to level
Step 06
LEVEL THE CASE.
Level the case as shown.
Step 05
INSTALLING THE POSTS.
Insert post as shown.

7 | 8 4 4 . 4 2 5 . 8 3 6 8 CHICAGO 8 BOX
PT. 8001 X 4 PT. 1001 X 8
Step 07
ATTACHING THE CASES.
Attach the cases to the posts as shown
using the provided hardware.

[e-mail] | 8ASSEMBLY NOTES
PT. 8001 X 8
PT. 1001 X 16
Step 08
ATTACHING THE CASES.
Attach the cases to the posts as shown
using the provided hardware.

9 | 8 4 4 . 4 2 5 . 8 3 6 8 CHICAGO 8 BOX
PT. 8001 X 4 PT. 1001 X 8
Step 09
ATTACHING THE CASES.
Attach the cases to the posts as shown
using the provided hardware.

[e-mail] | 10ASSEMBLY NOTES
PT. 8001 X 8
PT. 1001 X 16
Step 10
ATTACHING THE CASES.
Attach the cases to the posts as shown
using the provided hardware.

11 | 8 4 4 . 4 2 5 . 8 3 6 8 CHICAGO 8 BOX
PT. 8041 X 2 PT. 1218 X 4
8041
Anti-tip Bracket
Side Panel
1” lower than
case top
Wall
Step 11
ATTACH ANTI-TIP BRACKET TO THE WALL.
Install anti-tip bracket to wall stud 1-inch
below case top panel height.

[e-mail] | 12ASSEMBLY NOTES
PT. 8041 X 2
PT. 1217 X 4
8041
Anti-tip Bracket
8041
Anti-tip Bracket
8041
Anti-tip Bracket
Top
Back
Panel
Step 12
INSTALL ANTI-TIP BRACKET TO CASE.
Bracket must be installed to top panel of case.
In order to prevent damage, it is recommended
that 3/32” pilot holes be drilled prior to
installation.

13 | 8 4 4 . 4 2 5 . 8 3 6 8 CHICAGO 8 BOX
PT. 8042 X 2
8042
Anti-tip Strap
Step 13
SECURE THE CASE.
Install and tighten the
strap prior to using the
product.

BLU DOT DESIGN & MANUFACTURING, INC. DESIGNED IN MINNEAPOLIS, MN
Additional Information
CLEAN
Clean with a slightly damp, soft cloth. To remove dirt
and fingerprints, use a quality cleaner formulate for
wood furniture. Wipe completely dry with a soft cloth
in the direction of the wood grain.

BLU DOT DESIGN & MANUFACTURING, INC. DESIGNED IN MINNEAPOLIS, MN