VABCHES JY9983BR01 User manual

JY9983BR01
1-24
As this item contains many parts, please read the installation
instruction carefully before installation . Please use tools
properly and carefully. If you have any questions about the
product and installation, please contact us.
Our professional after-sales team will serve you online all
[e-mail]
day.
WhatsApp community↑

Before You Start
Read through each step carefully and follow the proper order
Separate and count all your parts and hardware
Give yourself enough room for the assembly process
Have the following tools: Flat Head Screwdriver, #2 Phillips Head
Screwdriver and Hammer
Caution: If using a power drill or power screwdriver for screwing,
please be aware of to slow down and stop when screw is tight.
Failure to do so may result in stripping the screw. （Assembly
speed can be increased by using electric screwdriver）
Helpful Hints
- Open your item in the area you plan to keep it to avoid excessive heavy lifting.
- Identify, sort and count the parts before attempting assembly.
- Compression dowels are lightly tapped in with a hammer.
- Slides are labeled with an R (right) and L (left) for proper placement.
- Make sure to always face the point on the top of the Cam Lock towards the
outer edge.
- If there is a back panel in the package, please install it to make sure your unit is
complete and sturdy.
-Please fix all the screws provided for the back panel which can enhance product
stability. If it is difficult to fix it when tightening, it can be fixed with the help of a
hammer and then tightened.
- Do NOT use harsh chemicals or abrasive cleaners on this item.
- Never push, pull, or drag your furniture.
PEOPLE NEEDED FOR ASSEMBLY: 1-2
2-24

Board Identification
Not actual size
TOP
Qty:1
A
RIGHT SIDE PANEL
Qty:1
C
LEFT SIDE PANEL
Qty:1
3-24
B
PARTITION
Qty:1
D
LEFT DRAWER FRONT
Qty:3
F
FRONT RAIL
Qty:1
E
RIGHT DRAWER FRONT
Qty:3
G
DRAWER RIGHT SIDE
Qty:6
I
DRAWER LEFT SIDE
Qty:6
H

Ø6.3X50mm
SCREW
spare:1
X2
Ø4X35mm
SCREW
spare:2
X24
Ø3.5X14mm
SCREW
spare:3
X76
HEXAGON WRENCH
X1
5678
Board Identification
Not actual size
DRAWER BACK
Qty:6
J
4-24
CIRCULAR TUBE
Qty:2
L
DRAWER BOTTOM
Qty:6
K
CIRCULAR TUBE
Qty:2
M
Ø15X9.5mm
CAM LOCK
spare:3
X30
Ø6.5X35mm
CAM BOLT
spare:3
X30
Ø8X30mm
WOODEN DOWEL
spare:1
X8
M6X30mm
BOLT
spare:1
X4
Part List
1234
RAIL
Qty:4
N
4X65mm

Ø4X18mm
SCREW
spare:1
X6
20X20X18mm
BRACKET
X2
SCREW
spare:2
X12
127X12X21mm
HANDLE
X6
SCREW
spare:1
X2
5-24
Part List
9 10 11 12
13
Insert the cam bolt into the hole first, then insert the cam lock and lock it.
13 24
Cam Lock Fastening System
The opening must point toward the
edge of the board
350mm
LEFT CABINET MEMBER
X6
14CL
RIGHT CABINET MEMBER
X6
14CR
M4X6mm
ANTI-TIPPING HARDWARE
X1 set
15
LEFT DRAWER RUNNER
X6
14DL
Ø3X12mm
RIGHT DRAWER RUNNER
X6
14DR
350mm
350mm 350mm
PLUG BOARD
X1
16