Bluetti EB70 User manual

BLUETTI EB70
User Manual

Canada
USA
Mexico
Australia
Germany
Italy
Spain
South Africa
Nigeria
UK Sweden
Austria
Switzerland
Japan
China
Malaysia
Singapore
Philippines
New Zealand
Thank You
Thank you for making BLUETTI a part of your family.
From the very beginning, BLUETTI has tried to stay true to a sustainable future through green
energy storage solutions for both indoor and outdoor use while delivering an exceptional
eco-friendly experience for our homes and our world.
That's why BLUETTI makes its presence in 70+ countries and is trusted by millions of customers
across the globe.

3
CONTENTS
Safety Instructions
General Safety
Handling
Storage and Usage
What's In The Box
Standard Packaging
Product Overview
Diagram
Specifications
Operation
LCD Screen
Powering On/Off
Mode
Setting
Charging
Discharging
Appendix
FAQs (Frequently Asked Questions)
FCC Warning
Technical Support
4
4
6
6
7
7
8
8
9
10
10
10
11
11
11
13
14
14
15
16

4
Read this manual for instructions on the proper use and safety information for the unit.
Follow the warnings and instructions marked on the unit and its accessories.
Pay attentionto the "Instruction", "Caution", "Warning" and "Danger" symbols in this
manual, and follow theinstructions carefully to avoid injury or damage.
The Safety Requirements provided herein are for illustrative purposes that include but
are not limited to those listed in this manual. Actual operation shall comply with all
applicable safety standards.
General Safety
• Always operate or store the unit in the conditions specified in this manual.
• The installation and ambient conditions must comply with the regulations in the
relevant international, national or regional standards.
• Unauthorized disassembly, alteration of the equipment or modification of the software
code is not allowed.
BLUETTI shall not be liable for the following circumstances:
• Equipment damage caused by force majeure, such as earthquake, fire, storm, flood,
mudslide, etc.
• Damage or loss during transportation.
• Damage caused by storage conditions that do not meet the requirements specified in
this manual.
• Damage to the hardware or data of the equipment due to customer negligence,
improper operation or intentional damage.
• Damage to the system caused by a third party or the customer, including handling
and installation that does not meet the requirements specified in this manual.
• This product is not suitable for providing electrical service for equipment and machines
that are highly dependent on the reliability of electrical power supply and that involve
personal safety, such as atomic energy, aviation, medical, etc. Poweroak will not be held
responsible for any personal safety accidents, fire accidents, equipment failures, etc.
caused by using this product to supply power to the above equipment and machines.
• Damage caused by adjustment, alteration or removal of identification marks.
Safety Instructions

5
To avoid danger, please regulate the operation in the following manner：
• Do not install, use and maintain the unit in adverse weather conditions such as
lightning, rain, snow and strong breezes (including but not limited to handling and
operating the unit, plugging and unplugging signal connections to outdoor facilities,
working at height, outdoor installations, etc.).
• Always turn off the power sourcebeforestartingany electrical work.
• Do not clean the unit with water.
• Do not disassemble,modify, tamper with or repairthe unit on your own.
• Regularly inspect the unit and its accessories for damage or deterioration.
• Use a tester to check for the presence of dangerous voltage before touching any
conductor or terminal.
• If the unit’s shell is cracked during transportation or use, do not use it and contact
BLUETTI support or your local BLUETTI dealers.
• Use a dry powder extinguisher if the unit catches fire.
• In case of fire, EVACUATE the building or affected area immediately, activate the
closest FIRE ALARM system and CALL 9-1-1 or your local emergency phone number.
• Use genuine cables and accessories provided by BLUETTI.
• Keep the unit away from heat sources or high temperatures, and do not expose it to
direct sunlight.
• Do not store the unit with flammable liquids, gases, or explosive materials.
• Make sure the area where you are using the unit is well ventilated and spacious.
• Do not block or cover the vents of the unit as this may cause irreversible damage to it.
• Use the unit for its intended purpose and avoid stacking objects on top of it during
storage or use.
• Do not move the unit during operation as the vibrations and shocks associated with
movement may cause damage to the internal hardware.
• In case of malfunction, turn off the unit immediately and contact BLUETTI support or your
local BLUETTI dealers if this manual cannot adequately explain the malfunction to you.
• Do not place the unit on an unstable or inclined surface.
• Do not insert foreign objects into any port and vent of the unit.
• Keep away from children and pets.
Legal and Regulatory Requirements
• The transportation, wiring and maintenance shall comply with all applicable laws,
regulations and standards.

6
Handling
Use mechanical assistance as needed (e.g. trolleys and adjustable height workbenches).
Storage and usage
• When not using the unit for over 3 months, charge it to 40% to 60% SoC to keep it in
optimal condition.
• Before storing the unit, power it off and remove all electrical connections from it.
• Store the unit in a cool and dry place. The ideal temperature range is 1o0C to 300C. The
unit can be safely charged and discharged at temperatures of -200C to 400C. However,
it’s NOT recommended to store the unit in harsh temperatures for extended periods of
time.
• Fully cycle the unit every 6 months to maintain the battery’s health.
If the SoC drops to 0 (during operation or upon startup), take the following actions to
safely restart the unit:
1)Shut down immediately.
2)Charging within 48 hours.
3)Battery should be kept at an ambient temperature of 50C to 350C for 24 hours before
charging.
It is recommended to charge the unit via an AC source. If charging via solar energy,
ensure that your solar system provides an output of more than 100W.
BLUETTI shall not be liable for any equipment damage caused by the violation of above
instructions.
Recommended number of people based on the weight of product
Weight
<18kg
18kg~32kg
32kg~55kg
>55kg
Number of people
1
2
3
4 or a cart
• User-provided materials and tools required shall meet the requirements specified in
applicable laws, regulations and relevant standards.

7
What's In The Box
2
AC Adapter
5
User Manual
6
Warranty Card
3
Car Charging Cable
4
Solar Charging Cable
1
Power Station
Standard Packaging
Note: Package details are subject to change without prior notice.
* AC Adapter: 120cm/47in.
Car Charging Cable: 72cm/28in. Cigarette lighter port to DC7909.
Solar Charging Cable: 150cm/59in. MC4 to DC7909.

8
Product Overview
Diagram
1. Charging Port
2. LCD Screen
3. Wireless Charging Pad
4. LED Lamp Button
5. LED Lamp
6. DC Power Button
7. USB-C Port
8. USB-A Port
9. DC5521 Port
10. Cigarette Lighter Port
11. AC Power Button
12. AC Outlet

9
Specifications
EB70
General
Battery Capacity
Cell Type
Dimensions (L*W*H)
Weight
Discharging Temperature
Charging Temperature
Working Humidity
716Wh
LiFePO4
12.6*8.5*8.7IN/320*216*221MM
21.4LB/9.7KG
-4-104°F/-20-40°C
32-104°F/0-40°C
10-90%
AC Output
AC Input
PV Input
Car Charging
DC Output
Power 120V
220-240V
800W
1000W
Surge
Frequency
1400W
50-60Hz
Cigarette Lighter Port *1
DC5521 *2
USB-A *2
Voltage
Current
Voltage
Current
Voltage
Current
Power
Power
Power
Voltage
Current
200W Max.
12-28VAC
8A Max.
Power
Open Circuit Voltage (OCV)
Current
Voltage
Current
12-24VDC
8A Max.
200W Max.
12-28VDC
8A Max.
12VDC
10A
12VDC
10A
5VDC
3A
100W Max. (5/9/12/15/20VDC, 3A; 20VDC, 5A)
15W Max.
USB-C PD3.0 *2
Wireless Charging *1

Operation
10
*The LCD screen is on for about 30-60 seconds. Please enable at least one of these ports (AC/DC)
if you want the display to stay on longer.
Note: Please turn on the DC power to enable the wireless charging.
Powering on: Press the AC/DC Power Button to start up corresponding output.
LCD Screen
a: ECO Mode
b: Battery Capacity
c: Input Power
d: Low-battery Alert
e: Temperature Anomaly Alert
f: Output Power
g: Overload Alert
h: Short-circuit Alert
Powering On/Off
Green light(on the button)
LCD Display
ON
ON*

11
Powering off: Press and hold power buttons to shut down corresponding output.
Setting Mode: When the AC output is off, press AC and DC power buttons simultaneously and
the frequency indicator flashes.
ECO Mode1: Under 'Setting Mode', press the DC power button to turn it on/off.
Green light(on the button)
LCD Display
OFF
OFF
AC Frequency2: Under 'Setting Mode', press the AC power button to switch.
Mode
Setting
1 When on this mode, the AC output will automatically turn off after 4-hour low (≤10W) or no load to save power.
2 AC Frequency: The number of alternating cycles per second in an AC sine wave. The utility frequency is usually 50/60Hz.
Charging
AC Charging
Simply plug the EB70 into a standard wall outlet and start charging.
AC Outlet
AC Adapter
Charger plug MUST be fully inserted into the charging port of the machine.

12
Connect the solar panels (in series or parallel) to EB70 via the solar charging cable.
Note: Please make sure your solar panels comply with:
OCV3: 12-28V Input Current: 8A Max. Input Power: 200W Max.
PV Charging
Connect the EB70 directly to the vehicle plug-in cigarette lighter port via the car charging cable.
3 OCV: Open circuit voltage. The maximum voltage that the solar panel can produce with no load on it.
Car Charging
Car Charging Cable
MC4 Connectors
Solar Charging Cable
ONLY use solar panels with compatible voltage.
Cigarette lighter MUST be fully inserted into the lighter port of the machine.

13
Connect the AC adapter input plug to the generator while the output plug goes to the charging
port of EB70.
Generator Charging
716Wh × DoD × ¨ ÷ (load power) = charging time (estimated)
10Wh
Smart Phone
Around 50-60 Times
LED Light Bulb
Around 20-30 Hrs
20W
Around 7-8 Hrs
75W
Television
Electronic Tools
Around 7-8 Hrs
80W
Refrigerator
Around 6-7 Hrs
90W
Slow Cooker
Around 2-3 Hrs
200W
10Wh
Discharging
Note: DoD refers to the Depth of Discharge, ę is the local inverter efficiency. DoD=90%, ę=90%.
Load power and charging time are measured in Watt and Hour.

14
Appendix
Q: How do I know whether my devices will work well with this product?
A: Please evaluate the total constant load of your appliances. If it doesn't exceed the Max. output
power of EB70, you can use this power station to charge.
Q: Can I use third-party solar panels to charge this product?
A: Yes, you can. As long as the specs of solar panels you're using fall in below range:
OCV: 12-28V
Input Current: 8A Max.
Input Power: 200W Max.
With the same power connector (MC4 or Anderson)
Q: Is there a button to turn on/off the wireless charging?
A: Yes. Press the DC Power Button to enable the wireless charging.
Q: Can it charge and discharge at the same time?
A: Yes. It supports pass-through charging. EB70 comes with the premium LiFePO4 battery and
proprietary Battery Management System to ensure that it can charge and discharge at the
same time.
Q: How can I clean this EB70 power station?
A: Using dry and non-abrasive cloths to wipe will be perfect.
FAQs (Frequently Asked Questions)

15
Should you require any further assistance, please do not hesitate to contact BLUETTI service team.
BLUETTI POWER INC
Web: https://www.bluettipower.com/
Tel: [phone]
Mail: [e-mail]
Add: 6185 S Valley View Blvd Ste D. Las Vegas, NV 89118.
Technical Support
Company: POWEROAK GmbH
Address: Lise-Meitner-Str. 14 28816 Stuhr Germany
Mail: [e-mail]
Company: POWEROAK ENERGY UK CO.,LTD
Address: Unit 2 NorthGate, Bolsover Business Park,
Woodhouse Lane Chesterfield England, S44 6BD
Mail:[e-mail]

BLUETTI EB70
Benutzerhandbuch

Canada
USA
Mexico
Australia
Germany
Italy
Spain
South Africa
Nigeria
UK Sweden
Austria
Switzerland
Japan
China
Malaysia
Singapore
Philippines
New Zealand
Dankeschön
Vielen Dank und herzlichen Glückwunsch, dass Sie sich für ein BLUETTI Produkt entschieden
haben.
BLUETTI hat von Anfang an versucht, einer nachhaltigen Zukunft durch grüne Energiespeicherlösungen
für den Innen- und Außenbereich treu zu bleiben und gleichzeitig ein außergewöhnliches und
umweltfreundliches Erlebnis für Ihr Zuhause und unsere Welt zu bieten.
Aus diesem Grund ist BLUETTI in über 70 Ländern präsent und genießt das Vertrauen von
Millionen von Kunden auf der ganzen Welt.
18

19
Inhalt
Sicherheitshinweise
Allgemeine Sicherheit
Handhabung
Aufbewahrung und Gebrauch
Lieferumfang
Standard Set
Produktübersicht
Schaubild
Spezifikationen
Bedienung
LCD-Display
Ein-/Ausschalten
Modi
Einstellung
Laden
Entladen
Anhang
FAQs (Häufig gestellte Fragen)
Technischer Support
20
20
22
23
24
24
25
25
26
27
27
27
28
28
28
30
31
31
32

20
Sicherheitshinweise
Studieren Sie dieses Handbuch, um sich über den vorschriftsmäßigen Gebrauch des
Geräts und diesbezügliche Sicherheitshinweise zu informieren.
Beachten Sie die auf dem Gerät und dem Zubehör vermerkten Warnhinweise und
Anweisungen.
Achten Sie auf die Symbole „Anweisung“, „Vorsicht“, „Warnung“ und „Gefahr“ in dieser
Anleitung und befolgen Sie die Anweisungen sorgfältig, um Personen- oder Sach-
schäden zu vermeiden.
Die in diesem Handbuch aufgeführten Sicherheitsanforderungen dienen der Veran-
schaulichung, erheben jedoch keinen Anspruch auf Vollständigkeit. Der tatsächliche
Betrieb muss allen geltenden Sicherheitsnormen entsprechen.
Bei Fragen wenden Sie sich bitte an den BLUETTI Support oder an Ihren BLUETTI
Händler.
Allgemeine Sicherheit
• Betreiben oder lagern Sie das Gerät stets unter den in dieser Anleitung genannten
Bedingungen.
• Die Installations- und Umgebungsbedingungen müssen den Vorschriften der
einschlägigen internationalen, nationalen oder regionalen Normen entsprechen.
• Das unbefugte Zerlegen/Verändern des Geräts oder Modifizieren des Softwarecodes
ist nicht gestattet.
BLUETTI haftet nicht für die folgenden Umstände:
• Geräteschäden, die durch höhere Gewalt wie Erdbeben, Feuer, Sturm, Überschwem-
mung, Erdrutsch etc. verursacht werden.
• Beschädigung oder Verlust während des Transports.
• Schäden, die durch Lagerungsbedingungen verursacht werden, die nicht den in
diesem Handbuch genannten Anforderungen entsprechen.
• Schäden an der Hardware oder den Daten des Geräts, die durch kundenseitige
Fahrlässigkeit, unsachgemäße Handhabung oder vorsätzliche Beschädigung
verursacht werden.
• Schäden am System, die durch Dritte oder den Kunden verursacht wurden. Dazu
zählen auch Handhabung und Installation, die nicht den in dieser Anleitung genannt-