Bluewater Spirit 300 Assembly instructions

Spirit
300 Manual

2
YOUR NEW WATER PURIFIER
THANK YOU for entrusting us to supply your new water purifier. We are confident it will provide you with many
years of trouble-free use. To avoid problems, it is important for you to read the user instructions. Read the «Safety
information» and the «Installation» instructions especially carefully. Everybody using the water purifier should be
familiar with how to operate it and its safety features
The manual should be kept and stay with the water purifier. If it is ever moved or changes owners, the user of
the appliance should be able to read about the various functions and safety instructions.
The user manual’s English instructions begin on page 3.
Vielen Dank, daß Sie unseren Wasseraufbereiter gewählt haben. Wir hoffen, daß Sie viele Jahre Freude an dem
Gerät haben werden. Um Probleme zu vermeiden, ist es wichtig, daß Sie dieses Benutzer-Handbuch lesen und die
Hinweise und Anweisungen der «Sicherheits-informationen» und der «Installationsanleitung» genau befolgen. Jeder,
der diesen Wasseraufbereiter benutzt, sollte wissen wie er funktioniert und was in einem Störungsfall zu tun ist.
Dieses Handbuch ist immer bei dem Wasseraufbereiter aufzubewahren. Geben Sie diese Unterlagen auch im
Falle eines Verkaufes an den neuen Besitzer weiter.
Die Deutche Bedienungsanweisungen dieses Handbuchs beginnen auf Seite 20.
NOUS VOUS REMERCIONS d’avoir choisi le purificateur d’eau RO 300, qui remplira son office sans faillir pendant
de nombreuses années. Pour obtenir les performances optimum de votre purificateur d’eau, il est recommandé de lire
attentivement le présent document et de le conserver en lieu sûr à des fins de consultation ultérieure. Afin d’éviter tout
problème, on ne manquera pas de lire la section intitulée «Sécurité», ni de se conformer scrupuleusement aux instruc-
tions d’«installation». Quiconque utilise le purificateur devra en connaître le maniement et les dispositifs de sécurité.
Conserver avec soin le présent manuel d’instructions et veiller à ce qu’il accompagne le purificateur en cas de
déplacement ou de vente de ce dernier, de façon à ce que tout utilisateur puisse à tout moment consulter le ma-
nuel d’instructions complet et les instructions de sécurité.
Le instructions en français du manuel d’utilisation commencent page 38.
GRACIAS por confiar en nosotros como proveedores de su purificador de agua, el cual esperamos utilice durante
muchos años sin problemas.Es importante para usted la lectura de este manual, con el fin de evitar problemas, y que
siga cuidadosamente los consejos de la «Información sobre Seguridad» así como las instrucciones de «Instalación».
Todo usuario del purificador de agua debe familiarizarse con su modo de funcionar y con los consejos sobre seguridad
correspondientes.
Este manual debe ser guardado y acompañar al purificador. Así, incluso en el caso de que cambiara de propie-
tario, cualquiera que lo utilice, pueda tener acceso a las diferentes funciones del purificador y a las
instrucciones de seguridad. El manual de instrucciones en Espanol comienza en la pagina 55.
GRAZIE per la fiducia che ci avete accordato acquistando questo nuovo apparecchio per il trattamento delle
acque potabili. Siamo certi che potrete contare sul suo perfetto funzionamento per molti anni. Per evitare problemi, è
importante che l’utente legga attentamente le seguenti istruzioni, prestando particolare attenzione ai capitoli “Infor-
mazioni sulla sicurezza” e “Installazione”. Chiunque utilizza un elettrodomestico dovrebbe conoscere le modalità di
funzionamento e le caratteristiche di sicurezza di tale apparecchio.
Conservare il presente manuale assieme al dispositivo. Se l’apparecchio viene spostato o ceduto a un altro
proprietario, l’utente deve sempre avere la possibilità di consultare la documentazione relativa alle varie
funzioni e alle istruzioni di sicurezza.
Le istruzioni in italiano del manuale inizano a pagina 72.
TACK för att vi fick förtroendet att leverera Din nya vattenrenare, som vi hoppas ska ge Dig många års
bekymmersfri användning. För att undvika problem är det viktigt att Du läser igenom bruksanvis-ningen och noga
följer «Säkerhetsinformationen» och anvisningarna om «Installation». Alla som använder vattenrenaren ska vara väl
förtrogna med användningssättet och säkerhetsdetaljerna.
Spara manualen och låt den följa med vattenrenaren vid flytt eller ägarbyte, så att alla som använder
produkten kan läsa om de olika funktionerna och säkerhetsinstruktionerna.
Bruksanvisningens svenska handledning börjar på sida 89.
%.
$%
&2
%3
)4
3%

3
CONTENTS
SAFETY INFORMATION 4
Installation ......................................... 4
Child safety ........................................ 4
Use .............................................. 4
Waste management ................................. 5
INFORMATION 5
Consumables....................................... 5
Extra accessories ................................... 5
Basic facts about reverse osmosis ...................... 5
PRODUCT DESCRIPTION 6
USING THE WATER PURIFIER 7
Production of pure water .............................. 7
MAINTENANCE 8
Replacing the lter................................... 8
Descaling.......................................... 9
Disinfection ....................................... 10
Storage ..........................................11
Cleaning the grid ................................... 12
REGULAR CARE OF THE WATER PURIFIER 12
IF THE WATER PURIFIER IS NOT WORKING 13
Trouble-shooting table............................... 13
SERVICE 14
Service and spare parts.............................. 14
TECHNICAL FACTS 15
INSTALLATION 16
Unpacking ........................................ 16
Positioning the water purier .......................... 16
Installing the pure water faucet ........................ 16
Water connection................................... 17
Electrical connection ................................ 17
Connecting the water purier.......................... 18
Flushing.......................................... 19
Moving the water purier ............................. 19
FOR THE USER FOR THE INSTALLER
Guide to use the manual
The following symbols will be found in the text to guide you throughout the instructions:
Safety information
Environment information
Step by step instructions
Hints and information

4
SAFETY INFORMATION
Carefully read the user instructions, which contain directions, advice and warnings, before installing and starting to uses
the water purifier. It will then work in a correct manner and provide the greatest benefit.
The user manual should be kept and stay with the water purifier if it is ever moved or changes owners, the user of thes
appliance should be able to read about the various functions and safety instructions.
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabili-s
ties, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the
appliance by a person responsible for their safety.
Children should being supervised to ensure that they do not play with the appliance.
Installation
Check that the water you want to purify meets the require-s
ments specified in «Technical facts».
The water purifier must be connected to an earthed electri-s
cal supply. As some operations require the power supply to
be temporarily interrupted, it is best to connect using a plug
that is also easily accessible after installation. Permanent
wiring to the electrical supply may only be carried out by
a qualified electrician and the installation should be per-
formed with a safety switch. Incorrect installation can result
in personal injury and/or damage to property which are not
covered by any warranty.
Plumbing work should be performed by a qualified plumber.s
If you do the installation yourself, be sure to follow applica-
ble local plumbing and sanitary codes.
It is important for the water purifier to be installed uprights
on a horizontal surface and that hoses and cables do not get
stretched or jammed when moving the purifier, e.g. during
installation and cleaning.
If the feed water is classed as unfit, have the purified waters
checked after installation. After this, test the purified water
once a year or if there is any change in the taste or odour, to
check that the water purifier is working well. Do not drink
the water if the results are unsatisfactory. Contact your
dealer.
When the water purifier is new, the purified water may nots
be drunk until the flushing procedure has been completed.
Child safety
Do not let children play with the water purifier.s
Never leave packaging material lying around so that childrens
can play with it.
Use
The water purifier is intended to produce the quantity ofs
water that is normally required for cooking and drinking in a
household. The purifier may only provide one water supply
point with water. It must not be connected to existing pipes,
tanks, dishwashers or similar. There is a risk of corrosion in
water pipes and water-heaters. For the same reason, no other
faucet for pure water may be used than the one included or
recommended by your dealer.
Purified water may only be drunk if the light on the faucets
glows green when the water is produced. It can take up to
120 seconds before the water purifier indicates good water
quality.
The water purifier must be connected to water and electric-s
ity in order for the automatic flushing system to work. It
flushes automatically after water has been purified and when
the plug is connected. If purified water is produced for more
than 2 hours, the water purifier will automatically stop and
flush and then switch to standby mode.
The top of the water purifier may not be used to place itemss
on.
Do not use the purified water in aluminium vessels. There iss
a risk of corrosion of the vessel and a higher concentration
of aluminium in the purified water.
Do not change or modify the water purifier in any way. Thiss
can result in personal injury and/or damage to property
which is not covered by any warranty.
If the water purifier is to be disconnected from water ands
electricity for an extended period (1 week), it should be
stored as described in «Storage». This also provides protec-
tion against freezing down to -30 °C.
The water purifier may not be used without a filter (excepts
during cleaning and storage). It could be seriously damaged.
If the water purifier contains preserving agents or detergents,s
it must be flushed in accordance with «Flushing» before the
purified water may be used.
Once a month, check that the connections are watertight.s
Leaks outside the appliance cannot be detected by the in-
ternal safety system. If leakage occurs, immediately switch
off the water supply and break the current to the appliance
by pulling the plug out of the wall socket or unscrewing the
fuse in the electrical distribution board.
If the mains plug has been damaged in some way, it must bes
replaced by a qualified person to avoid damage or injury.

5
SAFETY INFORMATION
Waste management
Packaging
80% of the components used in the appliance and its
packaging are identified with symbols to assist the
process of recycling and disposal.
This labelling is in accordance with international standards.
The packaging parts are made from recyclable corrugated board
and can be deposited at collection points for recycling.
Old apparatus
At the end of the water purifier’s life, disconnect the plug from
the electrical supply and cut the cable at the point where it en-
ters the appliance. Make sure that children do not play with the
left cable. Contact your local authority for information about
where the water purifier can be left, or contact your dealer.
Break the current to a damaged water purifier by pulling out
the plug. Otherwise remove the water purifier’s fuse from the
electrical distribution board.
Consumables
Filter Part no. 919 24 00-84
Descaling agent Part no. 150 72 07-01
Preserving agent Part no. 150 72 06-02
INFORMATION
Basic facts about reverse osmosis
Water
«Pure water» is pleasant tasting, good water without harm-
ful, unhealthy or undesirable quantities of organic and inor-
ganic substances. Water purification means the separation
of these particles and substances. Traditional purification
is characterised by certain substances being separated from
the water. Reverse osmosis is a superior filtration whereby
extremely small molecules and particles can also be sepa-
rated. The technique involves the unpurified water being
separated into two streams, the pure water and a concentrate
containing all the substances separated from the water.
Osmosis - Reverse osmosis
In nature, for example in our bodies, water is transported
by means of osmosis. The cell walls are a natural osmotic
membrane which separates impurities from pure water.
With the reverse osmosis water purification technique,
water is forced under high pressure through a semi-per-
meable, synthetic membrane. The result is pure water, the
osmosis water. The membrane is only permeable to water.
Other substances with molecules just a little larger than
the water molecule cannot pass through the membrane, but
are separated. One major advantage of reverse osmosis is
that no chemicals are used during treatment.
Extra accessories
Sound absorbing carpet Part no. 919 24 09-03
Consumables and extra accessories can be ordered through
your dealer. (Specify the part number as listed above.)

6
PRODUCT DESCRIPTION
Bracket for reject water hose1.
Reject water hose2.
Feed water hose3.
Hose clip4.
Angle bracket for pure water hose5.
Pure water hose6.
Connection to the indicator light on the faucet7.
Pure water faucet8.
Indicator light9.
Button10.
Adapter for feed water hose11.
Filter spanner12.
ON
FILTER
SERVICE
5
6
3
7
2
8
10
7
9
6
1
2
34
11
12
CONTROL PANEL

7
A
FILTER
SERVICE
USING THE WATER PURIFIER
When the water purifier has been installed and flushed according to the instructions, it is ready to be used. The water purifier has
an electronic control system which makes it easy to use. Remember the following:
Change the filter when filter replacement is indicated on the control panel (2 - 3 times/year).s
Clean the purifier when the flow has reduced by 50%.s
Production of pure water
To start pure water production:
Press the button on the faucet once. The water puri-s
fier produces pure water until the button is pressed
again. See fig. A.
Hold the button pressed. The water purifier producess
pure water until the button is released. See fig. A.
Indication
The indicator lights on the control panel and the
faucet indicate status and water quality.
The lights on the control panel indicate the following, see fig. B:
ON (green) The purifier is connected.
FILTER (flashing yellow) Replace filter.
FILTER (yellow) Emergency stop because
filter replacement has not
been carried out.
SERVICE (flashing yellow) Warning of deterioration in
water quality.
SERVICE (yellow) Emergency stop due to
deterioration in water
quality.
The indicator light on the faucet indicates the following, see
fig. A:
Green light Good water quality.
Yellow light Unsatisfactory water quality.
Flashing yellow light Control panel attracting your
attention.
It can take up to 120 seconds before good water
quality is indicated on the pure water faucet.
The water purifier is most efficient when producing
pure water for longer periods, e.g. filling a whole jug
rather than a drinking glass.
Automatic ushing
When the combined drawing time has been longers
than 60 seconds, an automatic flush is performed.
If pure water production has lasted for more than 2s
hours, the water purifier automatically stops, flushes
and goes into standby mode. The flushing procedure
takes 5 minutes and cannot be interrupted.
When the water purifier is connected to water ands
electricity, flushing is automatically performed 6
hours after the most recent flush.
B
ON

8
MAINTENANCE
Replacing the lter
It is important to pay attention to filter replacement, as the
filter’s primary job is to protect the membrane. Check that the
container is not leaking after filter replacement, and perform
follow-up checks.
Replace the filter when:
the filter light flashes or lightss
the water purifier emits a noises
the flow is reduced by half.s
Check that the water purifier is in standby mode.1.
Press and hold in the service button, using a pen,
until the service light comes on (approx. 6 seconds).
Release the button. The lights on the faucet now
flashes rapidly for 15 seconds. This procedure will
prevent flushing from taking place during filter
replacement.
Open the front cover using the grip, as illustrated.2.
Lift the lock plate on the filter cover and unscrew the3.
container. Use the supplied filter spanner if neces-
sary. Remember that the container is full of water
and that it can overflow!
Remove the old filter.4.
Wipe up any spillage on the base plate.5.
Clean the filter container with a brush and water.6.
Insert the new filter with the pin pointing up. Fill up7.
the container with water to the lowest thread.
Screw back the filter container. Tighten the filter con-8.
tainer until the locking plate clicks into the groove.
Do not tighten any more.
Close the front cover.9.
Reset the filter indicator by pressing in the filter but-10.
ton and keeping it pressed until the filter light goes
out (approx. 3 seconds). Use a pen.
The filter replacement is now complete and the
water purifier is ready to be used.
Filter replacement before indication:
If the filter is replaced before the light indicates that replace-
ment is necessary, reset in accordance with point 10. The only
difference is that the filter light first comes on and then go out.

9
MAINTENANCE
Descaling
When the flow is reduced, the water purifier should be descaled
to extend its lifetime. When the flow cannot be restored despite
descaling and filter replacement, contact your dealer. During
the descaling procedure, which takes around 10 hours, the
water purifier cannot be used.
The descaling product can be ordered from your dealer, see
«Consumables».
The descaling product must be kept out of the
reach of children! Wash your hands after using it.
Check that the water purifier is in standby mode.1.
Press the service button, using a pen, until the2.
service light comes on. Release the button. The light
on the faucet now flashes rapidly for 15 seconds.
This will prevent flushing from taking place during
descaling.
Unscrew the filter container in accordance with3.
«Replacing the filter», points 2 - 5. Remove the filter
and put it a side.
Mix 50 g (approx. 1/4 of the bag) of the descaling4.
product with 7 dl of lukewarm water. Stir until the
powder has dissolved, see fig. A.
Screw the filled container in place.5.
Start the water purifier and produce pure water for6.
30 seconds.
While production is still in progress, pull out the7.
plug, see fig. B.
Allow the water purifier to stand for approx. 108.
hours (e.g. overnight).
Undo the container and empty the water. Replace9.
the filter in accordance with «Replacing the filter»,
points 7 - 8, except that the previously used filter is
used here.
Close the front cover and connect the plug.10.
Flush the water purifier in accordance with «Flush-11.
ing».
Do not use the purified water until flushing is
complete.
The descaling process is now finished. The water
purifier is ready to be used.
B
A

10
MAINTENANCE
Disinfection
If the feed water has a high content of micro-organisms, the
water might develop an odour if the water purifier is not used
for an extended period of time (1 week). It is then necessary to
disinfect it. After the disinfection the filter has to be changed.
The disinfectant, sodium hypochlorite (concentration approx.
3.5%, odourless), can be purchased from supermarkets or
chemists.
The disinfectant must be kept out of reach
of children! Wash your hands after using it.
Check that the water purifier is in standby mode.1.
Press the service button, using a pen, until the serv-2.
ice light comes on. Release the button.The light on
the faucet now flashes rapidly for 15 seconds. This
prevents flushing from taking place during disinfec-
tion.
Disconnect the filter container in accordance with3.
«Replacing the filter», points 2 - 5. Remove the filter
and discard it (should not be saved).
Fill the container with 7 dl of lukewarm water and4.
pour in 1/4 dl of disinfectant. See fig. C.
Screw the filled container in place.5.
Start the water purifier and produce pure water for6.
30 seconds.
While production is in progress, pull out the plug as7.
shown in fig. D. Allow the water purifier to stand for
around 30 minutes.
Disconnect the container and insert a new filter into8.
it, in accordance with «Replacing the filter», points
7 - 8.
Connect the plug.9.
Close the front cover.10.
Flush the water purifier in accordance with «Flush-11.
ing».
Do not use the purified water until flushing is
complete.
The disinfection process is now finished. The
water purifier is ready to be used.
D
C

11
MAINTENANCE
Storage
The water purifier should be put into storage if:
it is going to be disconnected from water and elec-s
tricity for an extended period (1 week or more).
it is not going to be used to produce purified waters
for a period of 4 months or longer.
Preserving agents can be ordered from your dealer, see «Con-
sumables».
The preserving agent must be kept out of reach of
children! Wash your hands after using it.
Check that the water purifier is in standby mode.1.
Close the shut-off valve on the feed water connec-2.
tion.
Disconnect the feed water hose from the shut-off3.
valve.
Unscrew the filter container in accordance with «Re-4.
placing the filter», points 2 - 5. Remove the filter and
discard it (should not be saved).
Put the filter container back in accordance with «Re-5.
placing the filter», points 8 - 9.
Mix 2 litres of preserving agent and 2 litres of water6.
in a bucket.
Insert the feed water hose in the mixture, making7.
sure that the mouth of the hose is constantly below
the surface level of the liquid, see fig. E.
Start producing pure water. The water purifier now8.
draws the mixture into it. Stop the production of pure
water once all the liquid has been fed into the water
purifier. Note! The noise produced by the water puri-
fier changes during the first few seconds.
Disconnect the feed water and pure water hose from9.
the water purifier.
Pull out the plug.10.
The water purifier is put into storage and can be
kept in this way without the risk of freezing.
On reinstallation, the water purifier should:
stand somewhere where the temperature is above +5°s
C for at least 48 hours.
be supplied with a new filter, see «Replacing thes
filter».
be flushed in order to wash out the preserving agent,s
in accordance with «Flushing».
Don’t forget to insert a new filter in the water
purifier.
E

12
MAINTENANCE
Cleaning the grid
The grid blocks larger particles and is situated in the feed water
connection. If the flow is reduced or the purifier makes a noise,
the grid may be blocked.
Check that the water purifier is in standby mode.1.
Close the shut-off valve at the feed water connection.2.
Unscrew the feed water hose from the water purifier.3.
Using pliers or similar, grip and pull out the grid in4.
accordance with fig. F. Remember which way the
grid is installed.
Clean and rinse the grid.5. Reinsert the grid in the
feed water connection using the pliers.
Screw back the feed water hose.6.
Open the shut-off valve at the feed water and check7.
that there is no leakage.
The grid is now clean and the water purifier is
ready to be used.
Listed below are things you need to remember in the regular care of your water purifier. The points are listed according to how
often they need to be performed:
Every day, check that the indicator lights are not indicatings
that something has to be attended.
Keep the appliance clean. Externally, the appliance mays
only be cleaned with a damp cloth. Do not use a wet cloth
and do not pour water over the appliance. Do not use deter-
gents.
Once a month, check that all the connections are in places
and watertight. Wipe off any condensation that has collected
on the base plate.
Make sure that you always replace filter in time. The life-s
time of filter depends e.g. on the feed water.
After replacing a filter, stand the filter so that most of thes
water runs out over a few minutes. The filter can be discard-
ed with normal household rubbish, as it does not contain any
environmentally hazardous substances.
Depending primarily on the hardness of the feed water ands
its content of micro-organisms, the water purifier should
be descaled when the flow is reduced and disinfected if the
water smells or tastes bad.
When the capacity of the purifier is reduced even after filters
replacement and descaling, contact your dealer for mem-
brane replacement.
If the feed water has been classed as unfit, the water pro-s
duced by the water purifier should be tested once a year by
an approved lab.
If the water purifier is not going to be used in the next 4s
months or is going to be disconnected from water and elec-
tricity, the water purifier should be put into storage.
F
REGULAR CARE OF THE WATER PURIFIER

13
IF THE WATER PURIFIER IS NOT WORKING
Trouble-shooting table
To protect the user and the water purifier from incorrect use,
there are built-in alarms which cause the purifier to give an
indication and stop. The table below gives probable causes of
warnings given by the water purifier.
extinguished flashing lit
SYMPTOM CHECK/REMEDIAL ACTION
ON light not lit. The water purifier is not receiving power.
- Is the plug connected?
Yellow light on the faucet flashing and filter light
flashing.
Indicates that it is time for filter replacement.
- Change filter in accordance with «Replacing the filter».
Yellow light on the faucet flashing and filter light
lit.
Emergency stop due to filter not having been replaced.
- Change filter in accordance with «Replacing the filter».
Yellow light on the faucet flashing and service
light flashing.
Indication of deterioration in water quality.
- Contact your dealer for membrane replacement.
Yellow light on the faucet flashing and service
light lit.
Emergency stop due to air in the system caused by filter
replacement.
- Pull out the plug and connect it again. Let the purifier go
throug the flush before starting production of pure water.
Emergency stop due to deterioration in water quality.
- Contact your dealer for membrane replacement.
Yellow and Green light on the faucet lit and serv-
ice light lit.
The water quality measurement is not working.
- Contact your dealer for replacement.
Noise from the water purifier. The water purifier is not receiving sufficient water.
- Is the inlet pressure lower than 1.5 bar during operation?
- Is the grid blocked? — Clean the grid.
- Is the filter blocked? — Change filter.
Motor not starting.
Yellow or green light on the faucet lit.
The overflow protection has been triggered.
- Pull out the plug and wipe clean the base plate.
- If it is triggered again, call your dealer.
Motor not starting. The water purifier is flushing.
- Wait for 5 minutes.
- Is the faucet cord connected?
Low flow from the faucet. - Is the membrane blocked?
- Descale the water purifier in accordance with «Descaling».
- Make sure the pure water hose is not jammed.
No flow from the faucet. - Is the shut-off valve for the feed water open?
Dripping from the faucet during flushing. The hight distance between the faucet and the water puri-
fier is less than 500 mm.
- See «Installation».
Unpleasant smell. Odour problems can be caused by micro-organisms in the
water because the water purifier has not been used for an
extended period (1 week or longer).
- Clean the water purifier in accordance with «Disinfection».
If you are still having problems with your water purifier after having read through and tried the procedures described in the
trouble-shooting table, contact your dealer.

14
SERVICE
Service and spare parts
Before calling service, use the trouble shooting table «If the
water purifier is not working» to try to attend to the fault your-
self. If service is called in to solve a problem that is in this list,
there is a risk that you will be responsible for the cost. This is
also true if you have used the appliance for a purpose other than
it is intended for. Note that electrical faults should always be
rectified by a certified electrician.
Give the appliance’s model designation, product and serial
numbers according to the data plate (see fig. A). The plate is lo-
cated behind the filter. (Remove the cover to see the data plate.)
You can record these details here:
TYPE ............................................................
MOD ............................................................
PROD.NO ............................................................
SER.NO ............................................................
Purchase date ............................................................
A

15
TECHNICAL FACTS
Dimensions:
-height 462 mm
-depth 365 mm
-depth with hoses 390 mm
-width 150 mm
-weight (on delivery) 15 kg
-weight (filled with water) 18 kg
Capacity
(water temp. 15 °C) 2,5 (±0,4) l/min
Electrical connection 230 V, 50 Hz,
10 A, earthed supply
total output 350 W
operating cycle 10 minutes
noise level when installing
in undersink cupboard < 60 dB(A)
Water efficiency
- during operation approx. 65 %
- including flushing approx. 50 %
Operating range
- air temperature 2 - 43 °C
- relative humidity (RH) 25 - 95 %
iron: Fe2+ <0,5 mg/l* <0,5 mg/l*
iron: Fe3+ <0,3 mg/l* <0,3 mg/l*
manganese: Mn <0,3 mg/l* <0,3 mg/l*
COD Mn: O2<5 mg/l <5 mg/l
* in the event of higher values, extra filter required
Microbiological
heterotrophic bacteria
48 hours 1000 st/1 ml 1000 st/1 ml
coliform bacteria 1000 st/100 ml 1000 st/100 ml
e.coli 100 st/100 ml 100 st/100 ml
Requirements on feed water to water purier:
Variant -05 - 06
water flow >6 l/minute >6 l/minute
water pipe pressure 150 - 1000 kPa 150 - 1000 kPa
(dynamic) (1,5 - 10 bar) (1,5 - 10 bar)
water temperature 2 - 40 °C 2 - 40 °C
Chemical
Chemical <200 mS/m <120 mS/m
/salt <1500 mg/l <750 mg/l
/chlorid Cl-<900 mg/l <400 mg/l
cloudiness slight / distinct* slight / distinct*
turbidity < 0,5 FNU* < 0,5 FNU*
pH value 6 - 9 6 - 9
calcium: Ca2+
magnesium: Mg2+ <140 mg/l <140 mg/l
/hardness <20 °d <20 °d
}
Examples of rejection for substances which may be present in water
INORGANIC SUBSTANCES %
-turbidity (cloudiness) >99
-colour rating >99
Cations/Metals
-sodium >96
-potassium >97
-calcium (hardness) >99
-aluminium >99
-iron >99
-manganese >99
Cations/Heavy metals
-copper >99
-lead >99
-zink >99
-mercury >99
-cadmium >99
-chrome >98
-nickel >99
Anions
-fluoride >99
-chloride >98
-nitrate >97
-sulphate >97
ORGANIC SUBSTANCES %
Hydrocarbons
-heptane, octane, decane etc. >98
-benzene, toluene, xylene,
ethyl benzene etc. >99
-diesel oil >99
Polyaromatic hydrocarbons
-PAH >99
Chlorinated hydrocarbons
-compounds which can form
when water is chlorinated >99
Trihalomethanes (THM)
-trichlorometane >60
-bromodichloromethane,
dibromochloromethane,
tribromomethane >99
Pesticides
-PCB >99
MICRO-ORGANISMS
-heterotrophic bacteria >99
-coliform bacteria/e.coli >99

16
INSTALLATION
Unpacking
If the appliance has been damaged during transporta-s
tion, you should immediately notify the company
responsible for delivering it.
Carefully lift out the water purifier by taking hold ofs
the plastic bag and the rear handgrip. The appliance
can be damaged if it is lifted in any other way.
Check the purifier for any signs of damage and checks
that no accessories are missing. Any damage, faults
or missing parts should be notified to the supplier.
Do not leave the packaging material lying around sos
that children can play with it.
Remove the hose, see fig.s A.
Positioning the water purier
The water purifier must be installed under the sink unit and the
following points should be observed:
The purifier is installed upright, without support, ons
a horizontal surface that can take the load.
The installation space should be close to cold waters
supply, drainage and an earthed electrical supply.
It should be easy to inspect the control panel.s
It should be possible to open the front cover so thats
the filter container can be accessed.
The water purifier should be installed with a 2 cms
gap to any adjacent fittings or walls to ensure good
ventilation around the appliance.
Connections can be routed in any direction froms
the connection point; make sure no connections are
crushed or damaged. The dimensions of the area
required for the water purifier are specified in fig. B.
Installing the pure water faucet
The pure water faucet is supplied complete with a pure water
hose. The faucet can be raised and lowered and can be turned in
either direction. If the hose has to be cut, use a sharp knife e.g.
a carpet knife, so that a flat, smooth and circular cut surface is
achieved, see fig. C. This is essential in order for the connec-
tion to be watertight.
If the distance between the faucet’s highest point
and the water purifier’s highest point is less than 500
mm, water can drip from the faucet during flushing.
See fig. B.
Mark the position on the sink unit where the pure1.
water faucet is to sit. Make sure there is room on the
underside for the hose and the faucet fittings.
Drill a hole with a diameter Ø 20 mm.2.
Install the pure water faucet on the sink unit as3.
shown in fig. D1. Maximum unit thickness is 40 mm.
Adjust the height of the faucet to the desired position
and secure it with the black nut.
Make sure that the cable to the faucet does not
get jammed during installation. See fig. D2.
B
C
40 mm
D1 D2
12
A

17
Water connection
Feed connection: The water purifier is connected to cold water
(2 - 40 °C) via the feed water hose. The connection should be
supplied with an easily accessible shut-off valve, see fig. E. If
the connection is with new pipes or pipes that have not been in
use for an extended period, the water should be allowed to run
for a while before the hose is connected in order to flush out
sand and rust.
Check that the black washer is in position in the con-1.
nection on the feed water hose’s straight end.
Screw the feed water hose’s straight end onto the2.
shut-off valve as shown in fig. E. If the 3/4” hose
connection does not fit, it can be changed to a 1/2”
connection using the adapter supplied. Put the black
washer in the adapter and screw the adapter onto the
shut-off valve for feedwater. Screw the feed water
hose onto the adapter.
Reject water outlet connection: The flushing water passes via
the reject water hose to the reject water outlet. The hose may be
extended up to 4 m, and the minimum internal diameter is 13
mm.
The connection is made to the water trap via the dishwasher
drain or simular connections. If the reject water outlet spigot is
already connected, the intermediate section should be changed
to one with two spigots. The reject water outlet spigot is placed
before the water trap. Affix the hose as shown in fig. Fsecurely
with the aid of the hose clip and bracket for the reject water
hose.
The reject water hose should be placed at least
50 mm above the water purifier’s upper section and
existing water trap using the enclosed bracket.
Electrical connection
The water purifier should be connected to an earthed electrical
supply (230 V, 50 Hz and 10 A). We recommend connection
using a plug, as some operations require the power supply to be
temporarily interrupted. The plug should also be easily acces-
sible after installation.
F
E
INSTALLATION

18
INSTALLATION
Connecting the water purier
Before the water purifier is placed in its intended position,
remove the plug at the end of the reject water hose and the two
plugs in the connections on the purifier, see fig. G. Connect the
two hoses and the faucet cord to the appliance as shown in
fig. H.
Feed water
Screw the bent end of the feed water hose onto the1.
water purifier. Check that the seal is in place in the
connection. See fig. Hno. 1.
Open the shut-off valve on the feed water and check2.
that there is no leakage at the feed water hose.
Pure water
The pure water is routed via the pure water hose to the faucet
installed on the sink unit.
Connect the pure water hose from the pure water
faucet to the water purifier. Push the hose into the
bottom position, up to the mark (approx. 19 mm).
See fig. Hno. 2.
Reject water
The reject water hose has already been connected to the water
purifier on delivery. The other end of the hose is connected to
the waste water pipe.
Indicator light
Connect the cable from the faucet indicator light, as
shown in fig. Hno. 3, and place the water purifier in
the intended position.
Electrical connection
Connect the plug to the earthed wall socket as shown
in fig. I.
The water purifier starts and flushes for 90 seconds.
Flushing is performed every time the plug is con-
nected.
Do not drink the water until the flushing proce-
dure under «Flushing» has been completed.
G
H
I
2
1
3

19
INSTALLATION
Flushing
Flushing should take place when the water purifier:
is new and has never been used befores
is reinstalled after having been stored/protecteds
against freezing
has been cleaned, in order to rinse out the detergents
has been fitted with a new membrane.s
Do not use the pure water until flushing is
complete.
First check that:
the shut-off valve on the feed water is opens
the connection for the feed water is watertights
the reject water outlet and pure water connectionss
are watertight
the filter container is properly tightened.s
Check that there is no leakage from the connections during
flushing. In the event of leakage, pull out the plug and fix the
leak. Connect the plug and perform flushing again as described
below.
Check that the water purifier is in standby mode.1.
Press the service button, using a pen, until2. both the
service and filter lights come on (approx. 15 sec-
onds). The lights on the faucet now flashes rapidly.
Release the button. The flushing procedure is now3.
performed and takes 25 minutes. Water will be puri-
fied at the end of the procedure.
This water must not be used.
When the flushing procedure is complete, the lights on the
faucet goes out. The water purifier is now ready to be used.
Moving the water purier
If you move the purifier from one place to another, you should
remember the following points:
Close the shut-off valve for the feed water befores
removing the feed water hose.
Pull out the plug.s
Always transport the appliance upright.s
Install in accordance with the installation instruc-s
tions.
If the water purifier will not be used for four months or more,
or if it is to be disconnected from the water and electricity for
several days, it should be put into storage. See «Storage».

20
INHALT
SICHERHEITSHINWEISE 21
Installation ........................................ 21
Kinder ........................................... 21
Benutzung ........................................ 21
Recyclinghinweise.................................. 22
BESTELLINFORMATIONEN 22
Verbrauchsmaterialien............................... 22
Zusätzliche Teile ................................... 22
Fakten zur umgekehrten Osmose ...................... 22
PRODUKTBESCHREIBUNG 23
BENUTZUNG DES WASSERAUFBEREITERS 24
Zapfen von Reinwasser.............................. 24
WARTUNG 25
Replacing the lter.................................. 25
Entkalken......................................... 26
Desinfektion....................................... 27
Konservierung ..................................... 28
Reinigen des Eingangssiebs .......................... 29
PFLEGEHINWEISE 29
WENN DER WASSERAUFBEREITER
NICHT FUNKTIONIERT 30
Tabelle mit Fehlermeldungen ......................... 30
SERVICE 31
Service und Ersatzteile .............................. 31
TECHNISCHE DATEN 32
INSTALLATION 33
Auspacken der Anlage............................... 33
Aufstellen des Wasseraufbereiters ..................... 33
Installation des Wasserhahns ......................... 34
Der Wasseranschluß ................................ 35
Der Elektroanschluß ................................ 35
Anschluß des Wasseraufbereiters...................... 36
Reinigungs-Spülen ................................. 37
Umzug mit dem Wasseraufbereiter ..................... 37
FÜR DEN BENUTZER FÜR DEN INSTALLATEUR
Erklärungssymbole im Text
Die folgenden Symbole finden Sie im Handbuch:
Sicherheitsinformationen
Umweltinformation
Schritt-für-Schritt Erklärungen
Tips und Informationen