Bob and Brad QL/DMS.C2-D User manual

Technical details:
QL/DMS.C2-D Massage Gun
Speed: 2000 — 3200 r/min
Rated Power: 25W
Dimensions: 18.6x14.7x6cm / 7.3" x5.7" x2.3"
Battery Information:
Rated Voltage: 7.4V
Battery Capacity: 2500mAh
Charging Time: 210 minutes
Charging
1. Before the first use,please fully charge the device and to charge fully it
takes about 3 hours.
2. Connect the output end of the connection line to the DC charging port
at the bottom of the device, and then connect the input end of the
connection line to the mobile power source or mobile phone charger
(5V/2A, if the charging current or voltage is less than 5V/2 A, charging
time will be longer.Any regular phone adapters will be able to charge
the massage gun without a problem.)
3. The battery icon on the handle flickers regularly.The digital display on
the handle shows the battery power and indicates when the battery is
being charged and the level of power remaining.
4. When the battery icon on the handle stops flickering and remains on,
the digital display shows that 100% of the battery is full.The battery
can be recharged at any level of battery power. When charging, please
ensure that the device is shutdown.
Recharge fully using the USB-A to
USB-C Cable for 3-4 hours.It will
not take charge if you are using
USB-C to USB-C cable.
The battery lights should be
flickering when taking charge.
Press and hold the power button
for 3-5 seconds.
How to Fix Your Massage Gun if it Stops Working
1.
2.
Only works with
USB-A to USB-C
cable
Use with 5V 2A
charger output
USB-A USB-C
5V 2A

Guarantee
This product comes with a one-year warranty from the date of purchase.
Warranty will be voided due to any of the following:
Damaged due to improper usage or storage.
Damaged by attempting to repair or disassemble the device.Period of
warranty exceeded.
Utilize the Bob and Brad massage gun before, during, or after your
workout for maximum benefits. This massage gun can help accelerate
muscle tissue responsiveness by increasing hydration, range of motion
and function to tight muscles.

ATTACHMENT:
PROTOCOL: Sweep from A to B on
each sice for 1 minute
BALL HEAD
DURATION: 2 minutes
2 Minutes
CHEST
ATTACHMENT:
PROTOCOL: Sweep from A to B on
each sice for 1 minute
BALL HEAD
DURATION: 2 minutes
2 Minutes
ABS

ATTACHMENT:
PROTOCOL: Sweep from A to B on each
side for 30 seconds
BALL HEAD
DURATION: 1 minute
1 Minute
UPPER TRAPS
ATTACHMENT: BALL HEAD
PROTOCOL: Sweep from A to B on
each side for 1 minute
STEP 1: Upper back
DURATION: 2 minutes
PROTOCOL: Sweep from A to B
on each side for 1 minute
STEP 2: Lower back
DURATION: 2 minutes
4 Minutes
UPPER BACK

ATTACHMENT:
PROTOCOL: Sweep from A to B on
each side for 1 minute
BALL HEAD
DURATION: 2 minutes
2 Minutes
SHOULDERS
ATTACHMENT:
PROTOCOL: Sweep from A to B on
each side for 1 minute
BALL HEAD
DURATION: 2 minutes
2 Minute
BICEPS

ATTACHMENT:
PROTOCOL: Sweep from A to B on each
side for 2 minutes
BALL HEAD
DURATION: 4 minutes
4 Minutes
TRICEPS
ATTACHMENT:
PROTOCOL: Sweep from A to B on
each sice for 1 minute
BALL HEAD
DURATION: 2 minutes
2 Minutes
FOREARM

11
ATTACHMENT:
PROTOCOL: Sweep from A to B on each
side for 30 seconds
BALL HEAD
DURATION: 1 minutes
1 Minute
HANDS
ATTACHMENT:
PROTOCOL: Sweep from A to B on
each sice for 1 minute
BALL HEAD
DURATION: 2 minutes
2 Minutes
HIP FLEXORS

12
ATTACHMENT:
PROTOCOL: Sweep from A to B on
each sice for 30 seconds
BALL HEAD
DURATION: 1 minute
1 Minute
SHINS
ATTACHMENT:
PROTOCOL: Sweep from A to B on
each side for 2 minutes
FLAT HEAD
DURATION: 4 minutes
4 Minutes
GLUTES

13
ATTACHMENT:
PROTOCOL: Sweep from A to B on
each sice for 1 minute
BALL HEAD
DURATION: 2 minutes
2 Minutes
HAMSTRINGS
ATTACHMENT:
PROTOCOL: Sweep from A to B on
each sice for 1 minute
BALL HEAD
DURATION: 2 minutes
2 Minutes
CALVES

14
ATTACHMENT:
PROTOCOL: Sweep from A to B on
each sice for 2 minutes
BALL HEAD
DURATION: 4 minutes
4 Minutes
FEET

15
Every Bob and Brad product is backed by a 1-year warranty and an
award-winning customer service team. If you are in any way dissatisfied
with a product you ordered,we’ll exchange it,replace it or refund your
money under the warranty.Simply email us the problem,and we’ll take
care of it.
A Dedicated Team Just For You
Answer questions about
your device and best
practices.
Product Knowledge
Place New Orders
Help you solve any
issues with your device.
Troubleshoot
Initiate Returns
Provide instructions for
replacements, returns
and refunds.
Help with placing
orders online and/or
authorized resellers.
Call: [phone] Mon-Fri 9:00AM-4:30PM (CST)
Email: [email protected]
FLIGE Products LLC
3001 Esperanza Crossing Austin,TX 78758
Get in Touch.