BOERPLAY PB Parkbank 340 User manual

PKNE103.400
Park bench

Benaming
Title
Opmerking
Comment
Datum
Date
Tekening
Drawing
TOE PKN 103 400
Parkbank
Rebo
22-10-2015
BOER
SPEELTOESTELLEN
Hoofdafmetingen Main dimensions
0,85m
0,43m0,67m
2,00 m

Benaming
Title
Opmerking
Comment
Datum
Date
Tekening
Drawing
TOE PKN 103 400
Parkbank
Rebo
22-10-2015
BOER
SPEELTOESTELLEN
Bodemplan Groundplan
0,82m
0,29 m 1,12 m 0,29 m
0,41m

Benaming
Title
Opmerking
Comment
Datum
Date
Tekening
Drawing
TOE PKN 103 400
Parkbank
Rebo
22-10-2015
BOER
SPEELTOESTELLEN
Modules Modules
Opmerking
BenamingRev.Bew.
Volgnr
Progr.Type#Nr
ReboParkbank
400103
PKN
MOD11
Geleverde modules:
Zie tabel
Montageinstructie:
- De modules kunnen correct geassembleerd worden met de voorgeboorde gaten.
Montagevolgorde:
1 - Graa de gaten volgens het bodemplan
2 - Plaats ta el
3 - Controleer o het toestel voldoet aan de a metingen zoals op blad 'a metingen'
4 - Dicht de gaten en verdicht het zand
Controles:
1 - Correcte opbouw en alle bevestigingsmiddelen
Supplied modules:
See table
Assembly instruction:
- The modules can be assembled correctly using the predrilled holes.
Assembly sequence:
1 - Dig the holes according to the ground plan
2 - Place table
3 - Check that the equipment con orms to the dimensions shown on sheet 'dimensions'
4 - Close the holes and compact the sand
Checks:
1 - Correct assembly and all the asteners

LOGBOOK
(Onderstaand logboek kan gebruikt worden om te voldoen aan de eisen, gesteld in artikel 14 van het Warenwetbesluit Attractie- en Speeltoestellen)
Type indication Streetfurniture
Product code PKNE103.400
Name of equipment PB Parkbank model 340
Maximum height of fall n.a.
Year of construction 2017
Certificate 0183402366
inspection authority NVT
-
Name manufacturer BOERplay
Hyacintstraat 2 - 4255 HX Nieuwendijk
Phone: [phone]
Fax: [phone]
name installer
Description of equipment Park bench
Location of equipment
Data about the owner of the play equipment
Name:
Address:
Postcode and town:
Contact person:
Telephone number:
Data about the administrator of the play equipment
Name:
Address:
Postcode and town:
Contact person:
Telephone number:
PKNE103.400
Park bench

LOGBOOK
Inspection and maintenance intervals
Nr.
Inspection Maintenance
months
between
inspections
1
Verify equipment's stability, junctions and missing parts.
Inspect bolts, screws and nuts for absence, jams, corrosion
and wear.
Add missing parts, secure joints, apply missing fixing
agent and replace corroded parts.
1
2
Chec suspension for wear. Replace worn parts and/or remove non-functioning
parts.
1
3
Inspect rotating parts such as hinges, rolling-element
bearings, etc. for wear and acceptability.
Replace worn parts and/or remove non-functioning
parts.
1
4
Chec wood for splinters, unacceptable damage and signs of
rot. Especially at ground level.
Repair damage. Replace affected wood. Smoothen
splintered wood and sharp edges.
1
5
Inspect foundation for stability, tearing and coverage. Restore foundation and covering material.
3
6
Examine rubber and synthetic parts for wear, damage and
brea . Replace original parts.
3
7
Inspect metal for corrosion and damage in the coating. Restore any damaged coating (after removing rust and
applying primer).
6
Chec ropes, cables, chains and nets for wear and damage.
Steel cables and nets which are tensioned must be chec ed
for tension.
Replace parts where necessary. Steel cables and nets
must be tensioned.
3
9
Inspect equipment for unsafe changes and additions. Remove unsafe additions and correct unsafe changes.
1
10
Inspect safety surfaces. Restore and repair where necessary.
1
Remarks
1. If used intensively, all points require extra attention.
2. Extreme weather conditions and locations may require a higher inspection frequency. Discuss this with
the supplier.
3. Vandalism-sensitive locations require stricter inspections, possibly daily.
4. Check the terrain regularly for items that do not belong there, are unsafe or may be used wrongly.
Examples are poisonous plants, glass shards, etc. Frequency depends on strain.
5. Remember that bad maintenance leads to unsafe conditions and notably faster impoverishment of the
playground area.
6. Replacement parts can be ordered at the manufacturer with the part numbers on the module drawing.
Drawings can be found in de user guide.
7. The impact area shall be provided with impact attenuating surface according to the specified falling
height.
. This list is conform the CEN-standard "playground equipment and surfacing NEN-EN 1176-7".

Dit toestel is geen speeltoestel conform het warenwetbesluit attractie- en speeltoestellen,
en is dus niet als zodanig gecertificeerd.
This equipment is not playground equipment, so it has not been certified as such.

Benaming
Title
Opmerking
Comment
Datum
Date
Tekening
Drawing
MOD PKN 103 400
Parkbank
Rebo
22-10-2015
BOER
SPEELTOESTELLEN
Samenstelling module Assembly module
OpmerkingBenamingRev.Bew.VolgnrProgr.Type
#
Nr
M10 - VZ 8.8Dopmoer 020010012BSV81
M10 x 160 - VZ 8.8Slotbout 160010026BSV22
M10 x 140 - VZ 8.8
Slotbout
140010026BSV2
M10 x 110 - VZ 8.8
Slotbout
110010026BSV24
M10 x 100 - VZ 8.8
Slotbout
100010026BSV25
M10 - VZ 8.8
Sluitring
0020100 0BSV86
M10 - VZ 8.8
Veerring
0020100 2BSV8
7
L=285 mmPijp Ø 1.8 x 2.6 2002918OME28
Bankframe
001001
PKN
ORE29
Balk 150x47Rebo 2000 001
151PKN
ORE
4
10
Rond 6Meubeldop
0900 6DOPKST
4
11
10
9
8
4
2
3
5