BOERPLAY PKNE103.120 User manual

PKNE103.120
Tree bench

Benaming
Title
Opmerking
Comment
Datum
Date
Tekening
Drawing
TOE PKN 103 120 A
Boombank
Op poeren
27-8-2015
BOER
SPEELTOESTELLEN
Hoofdafmetingen Main dimensions
n
1335
0,00 m
0,42 m
0,83 m
2,33m
2,67 m
0,04m

Benaming
Title
Opmerking
Comment
Datum
Date
Tekening
Drawing
TOE PKN 103 120 A
Boombank
Op poeren
27-8-2015
BOER
SPEELTOESTELLEN
Bodemplan Groundplan
0,32m
0,84 m
Grondmarkering
Ground level marker
0,15 m
1,60m

Benaming
Title
Opmerking
Comment
Datum
Date
Tekening
Drawing
TOE PKN 103 120 A
Boombank
Op poeren
27-8-2015
BOER
SPEELTOESTELLEN
Modules Modules
Opmerking
BenamingRev.Bew.
Volgnr
Progr.Type#Nr
Gewicht 33,5 kgPoer Mode 9 001009OBTMOD12
1
BoombankBank
A
120103
PKN
MOD62
Geleverde modules:
Zie tabel
Montageinstructie:
- De hoofdmaten geven de maten van de leuning en het zitvlak aan
Montagevolgorde:
- Plaats de 6 bankdelen volgens de bemating om de boom
2 - Bepaal de te graven gaten
3 - Graaf de gaten en plaats de bankdelen
4 - Bevestig de bankdelen aan elkaar volgens de maten op het blad
"Hoofdafmetingen"
5 - Controleer of het toestel voldoet aan de afmetingen zoals op blad
"Hoofdafmetingen"
6 - Dicht de gaten en verdicht het zand
Controles:
- Correcte opbouw en alle bevestigingsmiddelen
2 - Controleer de afmetingen van de valbodem t.o.v. het toestel
Supplied modules:
See table
Assembly instruction:
- The main dimensions indicate the dimensions of the seat
Assembly sequence:
- Place the 6 benchparts around the tree
2 - Determinate the holes to dig
3 - Dig the holes and place the benchparts
4 - Attach the benchparts to each other according to the dimensions shown on sheet
'dimensions'
5 - Check that the equipment conforms to the dimensions shown on sheet 'dimensions'
6 - Close the holes and compact the sand
Checks:
- Correct assembly and all the fasteners
2 - Check the dimensions of the safety area with regard to the play equipment

LOGBOOK
(Onderstaand logboek kan gebruikt worden om te voldoen aan de eisen, gesteld in artikel 14 van het Warenwetbesluit Attractie- en Speeltoestellen)
Type indication Streetfurniture
Product code PKNE103.120
Name of equipment Boombank op poeren
Maximum height of fall n.a.
Year of construction 2017
Certificate 0183402366
inspection authority NVT
-
Name manufacturer BOERplay
Hyacintstraat 2 - 4255 HX Nieuwendijk
Phone: [phone]
Fax: [phone]
name installer
Description of equipment Tree bench
Location of equipment
Data about the owner of the play equipment
Name:
Address:
Postcode and town:
Contact person:
Telephone number:
Data about the administrator of the play equipment
Name:
Address:
Postcode and town:
Contact person:
Telephone number:
PKNE103.120
Tree bench

LOGBOOK
Inspection and maintenance intervals
Nr.
Inspection Maintenance
months
between
inspections
1
Verify equipment's stability, junctions and missing parts.
Inspect bolts, screws and nuts for absence, jams, corrosion
and wear.
Add missing parts, secure joints, apply missing fixing
agent and replace corroded parts.
1
2
Chec suspension for wear. Replace worn parts and/or remove non-functioning
parts.
1
3
Inspect rotating parts such as hinges, rolling-element
bearings, etc. for wear and acceptability.
Replace worn parts and/or remove non-functioning
parts.
1
4
Chec wood for splinters, unacceptable damage and signs of
rot. Especially at ground level.
Repair damage. Replace affected wood. Smoothen
splintered wood and sharp edges.
1
5
Inspect foundation for stability, tearing and coverage. Restore foundation and covering material.
3
6
Examine rubber and synthetic parts for wear, damage and
brea . Replace original parts.
3
7
Inspect metal for corrosion and damage in the coating. Restore any damaged coating (after removing rust and
applying primer).
6
Chec ropes, cables, chains and nets for wear and damage.
Steel cables and nets which are tensioned must be chec ed
for tension.
Replace parts where necessary. Steel cables and nets
must be tensioned.
3
9
Inspect equipment for unsafe changes and additions. Remove unsafe additions and correct unsafe changes.
1
10
Inspect safety surfaces. Restore and repair where necessary.
1
Remarks
1. If used intensively, all points require extra attention.
2. Extreme weather conditions and locations may require a higher inspection frequency. Discuss this with
the supplier.
3. Vandalism-sensitive locations require stricter inspections, possibly daily.
4. Check the terrain regularly for items that do not belong there, are unsafe or may be used wrongly.
Examples are poisonous plants, glass shards, etc. Frequency depends on strain.
5. Remember that bad maintenance leads to unsafe conditions and notably faster impoverishment of the
playground area.
6. Replacement parts can be ordered at the manufacturer with the part numbers on the module drawing.
Drawings can be found in de user guide.
7. The impact area shall be provided with impact attenuating surface according to the specified falling
height.
. This list is conform the CEN-standard "playground equipment and surfacing NEN-EN 1176-7".

Dit toestel is geen speeltoestel conform het warenwetbesluit attractie- en speeltoestellen,
en is dus niet als zodanig gecertificeerd.
This equipment is not playground equipment, so it has not been certified as such.

Benaming
Title
Opmerking
Comment
Datum
Date
Tekening
Drawing
MOD OBT 009 001
Poer Model 9
Gewicht 33,5 kg
17-8-2012
BOER
SPEELTOESTELLEN
Samenstelling module Assembly module
OpmerkingBenamingRev.Bew.VolgnrProgr.Type
#
Nr
M12 x 40 - VZ 8.8Ze kantbout ISO 4014 040012021BSV2
1
M12 x 35 - VZ 8.8Carro eriering 035012035BSV22
MODEL 9POER 033009POEOBT13
3
1
2

Benaming
Title
Opmerking
Comment
Datum
Date
Tekening
Drawing
MOD PKN 103 120 A
Bank
Boombank
27-8-2015
BOER
SPEELTOESTELLEN
Samenstelling module Assembly module
Opmerking
BenamingRev.Bew.
Volgnr
Progr.Type#
Nr
5 x 70 - RVS A2-70
Schroef Assy
070005002BSR261
5 x 50 - VZ 8.8
Schroef ver .
050005004BSV62
M8 - VZ 8.8
Borgdopmoer
015008011BSV
4
3
M8 x 50 - VZ 8.8
Slotbout
050008026BSV
44
M8 - VZ 8.8Sluitring 016008030BSV
45
ZWART
ROZETRING M5 000006RORKST166
175 mm lang
L 50x50x5
ALU
072
PKN
OME2
7