
5596-SMM Page 1
EFFECTIVITY:
CL-604 SUPPLEMENTAL MAINTENANCE MANUAL
Introduction
Revision A Nov 10/2006
INTRODUCTION
General
This Supplemental Maintenance Manual (SMM) contains information describing custom installation(s) and
modification(s) to this aircraft, and may include procedures for periodic maintenance. The SMM supplements
the Aircraft Maintenance Manual (AMM) and should be used concurrently with the AMM for maintenance
activities. This manual does not supersede the AMM, except in those instances where a custom installation or
modification has completely replaced a production-installed system.
Organization
Content and format of the SMM is based on the ATA-100 Specification and standard conventions. This
maintenance information is organized according to ATA chapter designation. A separate table of contents is
provided for each chapter. The information within each chapter may be organized under one or more of the
following subject categories and page number identifiers. These categories need not all be included in every
chapter.
System Descriptions - - - - - - - - - - - -Pages 1 - 99
Maintenance Practices - - - - - - - - - - -Pages 201 - 299
Servicing- - - - - - - - - - - - - - - - - -Pages 301 - 399
Removal/Installation - - - - - - - - - - - -Pages 401 - 499
Adjustment/Test - - - - - - - - - - - - - -Pages 501 - 599
Inspection/Check- - - - - - - - - - - - - -Pages 601 - 699
This supplemental maintenance manual may reference a manufacturer’s maintenance document or the AMM
for additional maintenance procedures. Unless identified in the manufacturer’s maintenance document(s),
specific parts identified for maintenance and/or replacement in the SMM are also identified in the Supplemental
Illustrated Parts Catalog.
Figures such as tables, diagrams, illustrations, or photographs may be provided to assist with system or
component identification or location. Figures in pages 1 through 99 are identified by title; other figures are
numbered consecutively within each page block.
Warnings, cautions, or notes may be included in various sections of the text. It is important to understand the
significance of each:
WARNING: WARNING STATEMENTS IDENTIFY METHODS, PROCEDURES, OR LIMITS THAT MUST
BE PRECISELY FOLLOWED TO AVOID INJURY TO PERSONS.
CAUTION: CAUTION STATEMENTS IDENTIFY PROCESSES THAT MUST BE FOLLOWED TO AVOID
DAMAGE TO EQUIPMENT.
NOTE: Notes call attention to details which may make the job easier.
This manual was published and released in accordance with the latest technical data available at the time of
publication.
Introduction