Boneco U300 User manual

U300
MANUAL
READ AND SAVE THESE INSTRUCTIONS

Instructions for use 3
Instructions d’utilisation 15
Instrucciones de uso 27

3
en
INSTRUCTIONS FOR USE
BONECO U300

4
en
1Cover
2Nozzle
3Flue
4Main switch / controller
5Cleaning brush
6A250 AQUA PRO
7Filter
8Fragrance container
9Power supply
1
2
4
7
6
5
8
9
3
OVERVIEW AND PART NAMES

5
en
Overview and part names 4
Introduction 6
Introduction 6
A250 AQUA PRO 6
Items included 6
Start-up 7
The right location 8
The right location 8
Functions and indicators 8
Water level 8
Fragrance container 8
Notes on care 9
Care instructions 9
Cleaning agent 9
Cleaning and descaling 10
Descaling 10
Removing mineral deposits 11
Replacing the A250 AQUA PRO 12
Replacing THE A250 AQUA PRO 12
Filter function 13
Cleaning the filter 13
Cleaning the filter 13
Technical data 14
TABLE OF CONTENTS

6
en
ITEMS INCLUDED
BONECO U300 “A7417 EZCal” cleaning and
descaling powder
A250 AQUA PRO
INTRODUCTION
Congratulations on your purchase of the BONECO U300.
This high-performance humidifier keeps the humidity at
a comfortable level at all times. No longer will you have
to contend with itchy eyes, dry skin and dry mucous
membranes. This helps make you and your family less
susceptible to colds and other infectious diseases.
You will not want to give up your newly gained com-
fort.
INTRODUCTION
A250 AQUA PRO
Please refer to the enclosed manual for putting the A250
AQUA PRO into operation.

7
en
4
3
1 2
5
Connect the BONECO U300 to the power outlet.
Fill the tank with cold tap water. Warning: Do not exceed the maximum fill level.
Use the control knob to switch on the BONECO U300. Set the intensity of the mist you want.
START-UP

8
en
WATER LEVEL
The LED lighting on the switch indicates the operating
status and water level.
• Blue: The appliance is switched on and in operation. A
sufficient amount of water is in the tank.
• Red: The appliance is switched on, but the water tank
is empty. Switch off the appliance or refill the tank with
fresh water.
• No display: The appliance is switched off or discon-
nected from the power outlet.
FRAGRANCE CONTAINER
Commercially available fragrances can be inserted into
the fragrance container on the rear side.
1. Press down on the fragrance container to unlock the
drawer.
2. Sprinkle the cotton wadding in the drawer with the
fragrance of your choice.
Never add the fragrance directly to the water tank;
doing so will damage the BONECO U300 and void the
warranty!
FUNCTIONS AND INDICATORS
THE RIGHT LOCATION
The BONECO U300 releases more than half a liter of wa-
ter into the air per hour. This makes it important to set up
the appliance in the right location.
Do not place the BONECO U300 directly on the floor,
since the moisture from the mist can damage floor
surfaces such as parquet or delicate carpeting.
• Make sure that the appliance stands about 30 centime-
ters (one foot) away from the closest wall.
• Do not direct the mist toward the wall, plants, furniture
or other objects in order to prevent water condensation
from damaging them. Maintain a distance of at least
50cm (20 inches).
THE RIGHT LOCATION

9
en
CARE INSTRUCTIONS
With increasing time and use, the performance of the
A250 AQUA PRO decreases. The inside of the BONECO
U300 becomes coated with limescale. Stagnant water
can also impair cleanliness and lead to unpleasant odors.
This means regular maintenance and cleaning is neces-
sary to ensure clean and unimpaired operation.
Always unplug the unit from the power outlet before
cleaning. Failure to do so can result in electric shock
and pose the risk of severe or fatal injury!
CLEANING AGENT
Clean the housing of the BONECO U300 with a soft cloth.
Use warm tap water with a small amount of dishwashing
detergent.
Interval* Task
Daily Check the water level; add water if necessary
After 1 week without operation Empty and clean the BONECO U300
Every 2 weeks Clean and descale the water tank
Every 2 to 6 months Replacing the A250 AQUA PRO
NOTES ON CARE
* Effective time intervals vary depending on air and water quality and the length of operation.
For this reason, the information here should be viewed as a recommendation.
FUNCTIONS AND INDICATORS

10
en
DESCALING
If stubborn limescale deposits form at the bottom of the
BONECO U300, the appliance must also be descaled in
addition to the cleaning. For this process, use the pro-
vided “EZCal” descaling agent. You can get replacement
parts at your BONECO specialist dealer or at the online
store under shop.boneco.us
1. Disconnect the BONECO U300 from the power out-
let.
The unit must always be unplugged from the power
outlet before draining it. Failure to do so can result in
electric shock and pose the risk of severe or fatal
injury!
2. Empty the water tank.
Tip the long side of the BONECO U300 towards the
sink (with the viewing window facing down). This
prevents water from getting into the air outlet and
damaging the unit.
3. Remove the A250 AQUA PRO.
4. Mix 1 bag of EZCal with 1 liter (a quarter gallon) of
warm water and pour the mixture into the water
tank.
5. Wait a few hours to allow the EZCal mixture to take
effect.
6. Clean the BONECO U300 with a dish brush.
7. Rinse the inside of the water tank with fresh tap wa-
ter.
8. Reinsert the A250 AQUA PRO.
CLEANING AND DESCALING