Boneco W200 User manual

W200
MANUAL
READ AND SAVE THESE INSTRUCTIONS

Instruction for use 3
Mode d’emploi 15
Instrucciones de uso 27

3
en
BONECO W200
INSTRUCTION FOR USE

TABLE OF CONTENTS
Items included and technical data 6
Dear customer, 6
Items included 6
Technical data*6
Overview and part names 7
Putting into operation 8
Handling 9
Operating modes 9
Fragrance container 9
Notes on cleaning 10
About cleaning 10
Recommended cleaning intervals 10
Cleaning the water base and the drum 11
Water base and drum 11
Cleaning the evaporator mat 12
About the evaporator mat 12
Cleaning in the washing machine 12
Cleaning by hand 12
Cleaning the fan 13
Cleaning the fan 13

BONECO APP
Benefit from the free BONECO App with many useful tips
concerning your BONECO Humidifier. This ensures hygienic
operation and improves indoor air quality permanently.
Your Benefits:
■Online Shopping for Accessories and Devices
■Product Information
■User Manual
■Practical Maintenance Calendar
■…and much more

6
en ITEMS INCLUDED AND TECHNICAL DATA
BONECO W200
TECHNICAL DATA*
Type designation BONECO W200
Mains voltage 230 V / 50 Hz
Power consumption Standby 0 W
Level 1 12 W
Level 2 22.5 W
Humidity output 2.2 gal/day (350 g/h)
Recommended room size 540 square feet / 4400 cubic feet (up to 50 m2/ 125 m3)
Water capacity 1.2 gallons (4.5 liters)
Dimensions L×W×H 11×11×16.2 in. (280 × 280 × 412 mm)
Weight (empty) 10.8 lb (4.9 kg)
Operating noise level Level 1 27 db(A)
Level 2 43 db(A)
* Subject to change
ITEMS INCLUDED
Printed quick start guide
DEAR CUSTOMER,
Congratulations on your purchase of the BONECO W200.
The high-performance air washer keeps humidity at
a comfortable level at all times and improves the well-
being of people and pets – especially during the dry win-
ter months. At the same time, dust and dirt particles get
caught in the evaporator mat, resulting in a significant
improvement in air hygiene.
Cleaning the BONECO W200 is as easy as handling it:
Because the water tray, drum and the evaporator mat
can be cleaned in the washing machine, upkeep efforts
are kept to a minimum.
Regardless of whether it is summer or winter: You will not
want to give up your newly gained comfort.

7
en
OVERVIEW AND PART NAMES
1On/Off, output level
2Fan
3Cover / air inlet
4Fragrance container
5Drum
6Evaporator mat
7Air outlet
8Power cable
9Water base
1
2
3 4 5 6
87 9

8
en PUTTING INTO OPERATION
Fill with cold tap water up to the marking.
Put the upper part back on the water base
(do not pinch cable!)
Place the BONECO W200 on a flat surface. Lift the upper part from the water base.
1
4
2 3
Plug the power cord into a power outlet.
5
Switch on the appliance.
6

9
en
HANDLING
OPERATING MODES
The BONECO W200 has two operating modes that can be
switched between using the rotary switch).
• In position , the BONECO W200 works with normal
performance (day mode).
• In position , the BONECO W200 works quietly
(night mode).
A green LED indicates that the BONECO W200 is operat-
ing correctly. The LED is red if the water tank is empty.
FRAGRANCE CONTAINER
Commercially available fragrances and essential oils can
be inserted into the fragrance container on the rear side.
Never mix any additives into the water base itself,
since doing so can decrease the performance of the
BONECO W200 and even cause damage. Such dam-
ages are not covered by the warranty.
1. Press down on the fragrance container to take out
the drawer.
2. Sprinkle the felt insert in the drawer with the fra-
grance of your choice.
The fragrance container can be cleaned in the dish-
washer. The temperature may not exceed 130 °F
(55°C ).

10
en NOTES ON CLEANING
ABOUT CLEANING
This means regular maintenance and cleaning is neces-
sary to ensure unimpaired and clean operation.
Recommended cleaning and maintenance intervals vary
depending on air and water quality, and operating time.
Dishwashing liquid and a scrub brush are recommended
for cleaning by hand.
Always unplug the BONECO W200 before you begin
cleaning! Failure to do so can result in electric shock
and fatal injury!
In the case of cleaning the drum and the water base
in the dishwasher, a temperature of 130 °F (50 °C)
may not be exceeded, as temperatures higher than
this can cause the plastic parts to deform.
RECOMMENDED CLEANING INTERVALS
Interval Action
After the third day without operation Empty water base and fill with fresh water
Every 2 weeks Clean water base, drum and evaporator mat
Yearly Clean fan and the inner area of the appliance