BonsenKitchen VS3911 User manual

Vacuum Sealer
Model:VS3911
Operation Manual
www.bonsenkitchen.com

1
Introduction
Congratulations on the purchase of this modern and high-quality product. This instruction
manual contains important information on safety, usage and disposal. Before using the
product, familiarize yourself with all handling and safety guidelines. This device may only
be used as described and for the purposes indicated. Please also pass these operating
instructions on to any future owner(s).
Safety Instructions
Always abide by the following safety rules and instructions when using electrical
appliances and read these instructions carefully before using the vacuum sealer.
Read all instructions.
Do not touch hot surfaces. Use handles or knobs.
To protect against electric shock do not immerse the cord or main unit in water or
other liquid.
Close supervision is necessary when any appliance is used by or near children.
Unplug from outlet when not in use and before cleaning.
Do not operate the device with a damaged cable or plug or after a malfunction of the
device or after damage. Contact customer service for inspection, repair or adjustment.
Do not use outdoors.
Do not let the cable hang over the edge of the table or counter and do not touch hot
surfaces.
Do not place on or neara hot gas or electric burner, or in a heated oven.
Do not open the appliance cover during operations.
Always ensure the upper/bottom cover in correct location during operations.
This product is only authorized for domestic use and not for commercial or industrial
purposes. It is only intended for applications described in these instructions.
This vacuum sealer may be used by children aged 8 years old and over if they are
supervised by an adult and have been told how to use the appliance safely and are
aware of potential risks.
Cleaning and maintenance may not be carried out by children unless they are 8 years
old or older and are supervised.
Children must not play with the vacuum sealer.
WARNING: Do not immerse the vacuum sealer in water or other liquids when cleaning it. If

2
SAVE THESE INSTRUCTONS
OPERATING INSTRUCTIONS
If the SUPPLY CORD is damaged, it must be replaced by the manufacturer, its service
agent or similarly qualified person in order to avoid a hazard.
A short power-supply cord is to be provided to reduce the risk resulting from becoming
entangled in or tripping over a longer cord.
If an extension cord is used,
1) The marked electrical rating of the extension cord should be at least as great as the
electrical rating of the appliance;
2) If the appliance is of the grounded type, the extension cord should be a
grounding-type 2-wire cord;
3 ) The longer cable should be arranged so that it does not hang over the counter top
or table top where it can be pulled by children or where it can be accidentally tripped
over.
Longer extension cords are available and may be used if care is exercised in their use.
the supplied power cord is damaged, it should be replaced by a qualified technician in order
to avoid a hazard.

3
Returning the packaging to the materials cycle conserves raw materials and reduces
the amount of waste that is generated. Dispose of packaging materials that are no
longer needed in accordance with applicable local regulations.
NOTE:
If possible, keep the original packaging during the warranty period so that the device
can be properly packed for returning in the event of a warranty claim.
Scope of Delivery
The appliance is supplied withthe following components as standard:
1 x Vacuum Sealer
1 x Roll bags (1.10x11.81 inches)
20 x Vacuum Bags (0.79x1.18 inches)
2 x Vacuum tubes
Check the package for completeness and for signs of visible damage.
If the consignment is incomplete or damaged due to defective packaging or carriage,
please contact us.
Installation Requirements
For safe and trouble-free operation of the device, the set-up location must fulfill the
following requirements:
When setting it up, place the appliance on a firm, flat and horizontal surface.
Do not place the device in a hot, wet or extremely damp environment or in the vicinity
of flammable materials.
The mains power socket must be easily accessible, so that the power cable can be
easily disconnected in the event of an emergency.
Electrical Connection
Before connecting the device, compare the connection data (voltage and frequency) on
the type plate with those of your power supply. This data must match to prevent
damage to the device.
Make sure that the power cord is undamaged and does not run over hot surfaces
and/or sharp edges.
Make sure that the power cord is not taut or bent.
Do not let the power cable hang over edges (trip wire effect).
Insert the plug into the mains power socket.
Sealing Vacuum Bags
The bag width may not exceed 30cm.Otherwise it cannot be welded correctly.
Use only nylon-PE films with a structure (points or grooves) on oneside and a thickness
of approximately 0.15 - 0.30 mm. Otherwise the weld seam will not be tight and the
appliance may be damaged. You can recognize bags of this type from the information
on the package. The quality of the weld seam will vary depending on the type and
thickness of the bag.
ease of disposal,and are there fore recyclable.

4
The bag opening must lie flat on the welding wire. Otherwise, welding will not work
properly. Close the cover of the device. The seal presses the bag onto the sealing wire to
create a smooth seam. Make sure that both corners of the lid are closed. If necessary,
press the top cover again so that the lid clicks in audibly and firmly. Select the mode
(dry or wet). When the selection is , the indicator lights up. WhenMoist isDry Dry
selected, the indicator will light up.Moist
1.Buttons:
1) External Vac 2) Vac 3) Seal
4) Dry 5) Moist 6)Cancel
2.Indicate Light:
12) External Vac Indicator 13) Vac Indicator 14) Seal Indicator
15) Dry Indicator 16) Moist Indicator 17) Cancel Indicator
3.Other Parts:
7) lid 8) Snap Joint 9)Sink
10) Sealing Rubber Strip 11) External Interface /Suction Interface
Make sure that the weld is properly closed. A correct weld should be a smooth, straight
strip without wrinkles.
Wait 15 seconds before sealing the next bag to allow the appliance to cool down.
Fill the bag in such a way that no food residues or liquids can escape and enter the
machine during sealing.
Parts
46
1235
7
11
Open the device cover by pressing the cover release and fold the cover upwards.Place
the open end of the bag in the machine so that the opening of the bag lies centrally
under the lower sealing ring. The bag should not be inserted further than the rear
ring and must lie between the front and sealing rear sealing ring. If the bag lies over
one or both of the sealing rings, the bag cannot be properly sealed.
9
8
10
12 13 14 1615 17

5
(1). Place the machine on a flat surface, plug in the power.After filling the food
to vacuum bag, put the vacuum bagflatlyinto the vacuum sealer.
(2). Select the "Dry " or "Wet " buttonaccording to the food (Pic.2)
 The machine starts to workand automatically seal.
(3). The light flash first, thenthe light isoff, remove the bag, vacuum machine
operation completed(Pic.3)
(Pic.1)
(Pic.2)
(Pic.3)
Operating the equipment
1. DRY/WET
The machine will go to sleep mode if there is no operation after 5 minutes. The CANCEL
button will keep flashing and other button lights off. Press the CANCEL button to reactivate
the machine.

6
(1). Place the machine on a flat surface, plug in the power.After filling the food
to vacuum bag, put the vacuum bagflatlyinto the vacuum sealer.
(2). If you only need to seal the food but no need to evacuated air in the bag ,
just press "Seal" button (Pic.2), then the sealing indicator lights up.
(3). The light flash first, then the light is off, remove the bag, vacuum machine
operation completed (Pic.3)
(Pic.1)
(Pic.2)
(Pic.3)
2. SEAL

7
(1). Place the machine on a flat surface, plug in the power.After filling the food
to vacuum bag, put the vacuum bagflatlyinto the vacuum sealer.
(2). In this mode, you can control the vacuum sealer manually. If you press and hold
the "VAC" button, the machine will keep working, After it meet your need, release
the button to stop the machine (Pic.3), then press the "SEAL" button to seal the bag.
(3). The light flash first, then the light is off, remove the bag, vacuum machine
operation completed (Pic.4)
(Pic.1)
(Pic.2)
(Pic.3) (Pic.4)
3. VAC

8
(1). Insert one end of the pumping port into the machine valve and put the other end
into Vacuum tank (two end can be switch)
(2). Press the “EXTERNAL VAC” button, the vacuum sealer star to work.
(3). When the light is off, remove the vacuum tube, vacuum machine operation
completed (Pic.3)
(Pic.1)
(Pic.2)
(Pic.3)
4. EXTERNAL VAC

9
Customer Service: suppor[email protected]
Warranty claim procedure
Warranty
Cleaning
Storage
NOTE: Once you have sealed 5 bags continuously, allow the appliance to cool down for
about 1 minute. During this cool-down phase, you cannot start the appliance. After the
cool-down phase, you can use the appliance as normal.
In order to ensure a quick processing of your case, please observe the following notes:
The article number can be found as a sticker on the back or underside of the device.
If functional or other defects occur, please contact the specified service center by e-mail.
The warranty for this device is 12 months from the date of purchase. The warranty only
covers material and manufacturing defects, but not transport damage, wear parts or
damage to fragile components such as buttons or sealing rings.
The guarantee expires in case of improper handling, use of force and internal
manipulations which are not carried out by our authorized service center. Your statutory
rights are in no way limited by this warranty. The warranty period is not extended by
repairs under the warranty. This also applies to replaced and repaired parts. The device
has been manufactured with care and carefully checked before delivery.
Please keep your receipt as proof of purchase.
In case of warranty please contact our customer service.
Unplug the unit before cleaning it.
The unit has a built-in cable holder on the bottom of the case, on which you can wind
the power cord when not in use. This will prevent the power cord from getting caught,
getting dirty or becoming a source of danger by hanging loosely.
Do not use aggressive or abrasive cleaning agents, as these can damage the surface of the
housing.
Clean the surface of the device with a slightly moistened cloth and a mild detergent.
Make sure that no moisture can penetrate into the device.
Store the appliance in a clean, dry place protected from direct sunlight.
Do not use hard or sharp objects to remove adhesive from the welding wire. Otherwise the
welding wire or the insulation could be damaged.
Wipe off the upper and lower sealing rings as well as the press seal with a damp cloth.
Make sure the device is dry before using it again.

10
Note: The fruit itself will release gas for ripening effect, and it is easy to deteriorate in a
closed environment. It is recommended to keep it fresh for a short time, not for long.
Freshness Comparison Table
Freezer cabinet
(41±37.4°F)
Non-vacuum storage
Vacuum storage
meat
2-3 days
12-13 days
seafood and fish
1-3 days
6-8 days
cooked meat
3-5 days
10-18 days
vegetables
3-5 days
7-10 days
fruit
4-6 days
14-20 days
egg
10-15 days
30-50 days
Freezing chamber
（3.2~ -4°F）
Non-vacuum storage
Vacuum storage
meat
2-3 months
1 year
seafood and fish
1-3 months
1 year
Room temperature
（77±35.6°F）
Non-vacuum storage
Vacuum storage
meat
1-2 days
6-8 days
rice/flour
2-4 days
over 1 year
peanut/dried beans/tea
2-3 days
over 1 year
Technical Data
Model No.: VS3911
Operating Voltage: 120V~ 60Hz
Power Consumption: 120W
Max. Width for Shrink-wrapping: 11.81 inches
Vacuum Value: >80Kpa
Noise Level: circa 77 dB
Product Dimension: 14.56×6.89×2.28 inches

11
Register your product at www.bonsenkitchen.com
to get more perks!
Follow us @bonsenkitchen
: 5805C Peachtree Corners East
Norcross, GA, 30092
: 1-888-965-8032
: suppor[email protected]
Bonsen Electronics Inc.