Booster BLJ-2001LS User manual

Pro Massage Gun

Thank you for choosing our booster massage gun. Before using it, please
read this manual carefully to ensure proper operation and keep this manual
for future reference.
Main functions:
Relieving muscle soreness, stimulating the circulation of blood, relieving stiffness
of cervical vertebra, and improving muscle recovery.
CONTENTS
Main information
------------------------------------------- /01 - 02
Product introduction
---------------------------------------- /03
Instruction for use
----------------------------------------- /04
Product specification
Common problems
Maintenance
Environment protection
Warranty
--------------------------------------
----------------------------------------
-----------------------------------------------
------------------------------------
---------------------------------------------------
/05
/05
/06
/06 - 07
/07

To avoid harm, fault, electric shock, fire, death and other equipment damage,
please read the instructions and warnings carefully.
01
PRECAUTIONS
1. Minors are forbidden to use this product. It is not a toy.
2. Forbid to put this product into water. If it falls into water accidentally, please send it
for inspection in time.
3. Forbid to put this product near or into the fire.
4. Forbid to use it on head, neck, heart or genital.
5. Forbid to use it on bones. Use it on soft tissues only when not feeling pain or
discomfort.
6. Forbid to use non-original charger to charge the product, otherwise it may cause
a fire.
7. Forbid to drop the product intentionally.
8. Forbid to remove the screws or try to disassemble the product.
9. The product is not an alternative or complement of medical treatment. If you are
feeling pain, undergoing medical treatment or using any other medical devices,
please consult your doctor before using this product.
10. Forbid to put fingers, hair or other body parts near to the back of the massage
heads in case of the squashing.
PROHIBITION
Do not touch this part when the machine is running without
the massage heads being installed.
Do not touch this part when the machine is running with the
massage heads installed.

02
If you have any of the following situations, or any health-related problems,
please consult your doctor before using this product.
1. Pregnancy, diabetes, mental disorder, retinal damage and other complications.
2. Pacemaker usage, recent surgery, epilepsy, migraine, lumbar disc protrusion, and
spondylolisthesis.
3. Recent joint replacement surgery, Intrauterine contraceptive device placing
surgery, metal parts implantation, or other concerns about your own body.
Ongoing research on the effect of vibration training toward specific medical diseases
may reduce the number of contraindications. Practical experience shows that, in
many cases, vibration-training-combined treatment is also an effective medical
guidance. However, it must be done with doctor advice.
DISCLAIMER

03
1. PRODUCT INTRODUCTION
MASSAGE HEADS
Charging port Silicone grip
Battery disassembly switch
Quick release massage head
Power display
Control panel
Power switch
Big round head
For large muscle group
massage and relaxation.
Air cushion head
For soft tissue and whole
body relaxation.
Flat head
For large muscle group
massage and relaxation.
Bullet head
For pain point relaxation.
Strong intensity.
Small round head
For whole body muscle
massage and relaxation.
Spinal head
For spine massage.
Strong intensity
------
----
-----
---------
-----
---------
------
----
1
234
5

04
a. Switch the power on key to ON, and the device is on.
b. Long press of multifunction button for 2 seconds to switch mode (standard
mode / automatic mode):
① Under the standard mode: short press the adjustment gear briefly, and each time you
press it, add a gear. 5 adjustable gears in total.
② Under the auto mode: short press to adjust the vibration mode, and switch one mode
every time you press. Four modes adjustable (fade-out vibration, crescendo vibration,
wave vibration).
c. The device automatically turns off every 10 minutes during use. Press the power
button again to continue using device.
The charging port is on the bottom of the massage gun handle.
a. Please fully charge the battery for the first use.
b. Turn it off when charging.
c. Connect the power supply. Charging indicators will flash in turn and it shows that the
machine is charging.
d. When the power display turns to 100%, it means that the battery is full.
e. Do not move the machine when it is charging.
2. INSTRUCTION FOR USE
MULTI-FUNCTION BUTTON USE
CHARGING
Turn off the machine before removing the battery.
a. Push the battery removal switch to the nose with one
hand and hold it.
b. Hold the handle with the other hand and slowly pull out
the battery downward.
BATTERY REMOVAL
Multi-function Button
------
Standard Mode
Auto Mode
-------
-----
---
---
Fade-out vibration
Decreasing vibration intensity, suitable for muscle
relaxation after exercise.
Crescendo vibration
Increasing vibration intensity, suitable for muscle
activation before exercise.
Wave vibration
Vibration fluctuation, suitable for various scenes to
relax.
1-5 gears adjustable
1
234
5
②
①

05
UNABLE TO POWER ON
a. Low temperature:
Keeping the massage gun below 0℃ for a long time will reduce the activity of battery
and prevent normal functioning. The product cannot work normally while being
power on.
Solutions: Lay the product for two hours at temperature above 0℃, or raise the
machine temperature fast with a hair-drier.
b. Low battery:
When the battery is low, or user does not charge it for a long time, the battery will
enter the low battery protection mode. The product will not work normally at this
time when you start it again.
Solutions: Turn it off with charger connected. Make sure it is fully charged, and it can
run normally.
The charging port is on the bottom of the massage gun handle.
a. Please fully charge the battery for the first use.
b. Turn it off when charging.
c. Connect the power supply. Charging indicators will flash in turn and it shows that the
machine is charging.
d. When the power display turns to 100%, it means that the battery is full.
e. Do not move the machine when it is charging.
3. SPECIFICATIONS
4. FAQ
Product name: Muscle massage gun
Type: BLJ-2001LS
Rated input：100-240V~50/60Hz
Rated output：DC，24V 1A
Battery capacity：2500mAh
Rated speed：1300-3300rpm(+-100)
Stroke：12mm
Maximum power：126W
Net weight：1.08kg
Size：260×190×60mm
Slight abnormal
noise during use
Battery does
not charge Replace the battery please, for the aging or poor contact of battery.
Slight noise is a normal phenomenon in the period of new machine. If the
noise gets louder after a period of use, please send it for inspection.
TROUBLESHOOTING

06
5. MAINTENANCE
a. When you do not use the product for a long time, turn it off and hold electricity
while safe-keeping it. Store it in a safe, cool and dry place.
b. Charge the product every half a year if you do not use it for a long time. Holding
electricity prevents battery damage due to stains.
c. Please choose neutral detergent and soft cloth for daily maintenance. Do not use
engine oil, organic solvents or other chemicals for cleaning.
d. Please turn off the power after using the product, or before cleaning the product.
e. The product should be well fixed during transportation. Avoid violent vibration,
collision, rolling and falling.
6. ENVIRONMENTAL PROTECTION
a. Name and content of harmful substances in the product
Do not discard this product with general household waste at the end of its service life.
Put this product in the recycle bin designated by the government or send this product
back to the manufacturer's after-sales service center. The service center staff will
recycle it in an environmental-friendly manner.
This form is based on the rules of SJ/T 11364.
O: The content of harmful substances in all parts meet the limited requirements of GB/T 26572.
X: The content of harmful substances in at least one part exceeds the limitation of GB/T 26572.
Part name
Poisonous and harmful substances and elements
Shell
Pb
○ ○ ○ ○ ○ ○
× ○ ○ ○ ○ ○
× ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○
× ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○
Hg Cd Cr(Ⅵ) PBB PBDE
Circuit board
Metal parts
Rubber parts
Adapter
Connecters
Handle cover

07
7. WARRANTY
The warranty period of this product is 18 months, and the authority is not transfer-
able. From the date of purchase, you enjoy free warranty within the warranty period
with valid documents. (Outward appearance is not covered.)
Disclaimer:
1. Accidental damage, improper use or transportation;
2. Improper maintenance;
3. Operation without following the manual instructions;
4. Unable to provide formal purchase certificate;
b. Environmental protection use period
The time limit of environmental pollution, serious damage to people and property, or
the leakage of toxic and harmful substances, is 10 years in normal use as described in
this manual.
This sign indicates that the environmental protection period of this product is 10 years in normal
use. Some components may also have environmental protection period signs. The specific
period of environmental protection for each component shall be subject to its own sign.
Eastern Currents Ltd
9109 Shaughnessy St.
Vancouver, BC
V6P 6R9
www.easterncurrents.ca
QF 07.005
Imported by: