Bosch ARD?FPBEW2?H2 User manual

ARD‑FPBEW2‑H2 Fingerprint Reader,
Multiclass
ARD‑FPBEW2‑H2
en Quick installation guide

ARD-FPBEW2-H2 Fingerprint Reader, Multiclass Connections | en 3
Bosch Access Systems GmbH Quick installation guide 2019.04 | |
1 Connections
1.1 Components
ARD-FPBEW2 Bracket
Ferrite Core
(1 EA)
Bracket Fixing Screw
(Star Shaped)
PVC anchor
(2 EA)
Heat shrink
Fixing screw
(2 EA)
Drilling template
OSS Manual Safety
Instructions
Quick
Installation
Guide

4en | Connections ARD-FPBEW2-H2 Fingerprint Reader, Multiclass
2019.04 | | Quick installation guide Bosch Access Systems GmbH
1.2 Power Supply Connection
UPS
(Optional)
12V DC
11 - PWR +VDC
13 - PWR GND
Red
Black (White stripe)
!
Warning!
Do not connect the device to the DC power supply(or adapter) and PoE power supply at the
same time.
Notice!
Make sure to isolate the power connector cables if PoE is used for power supply.
1.3 LAN Connection

ARD-FPBEW2-H2 Fingerprint Reader, Multiclass Connections | en 5
Bosch Access Systems GmbH Quick installation guide 2019.04 | |
1.4 RS-485 Connection
Control device
14 - 485 TRXN (RxTx-)
15 - 485 TRXP (RxTx+)
16 - 485 GND
Yellow (Black stripe)
Blue (White stripe)
White (Black stripe)

6en | Connections ARD-FPBEW2-H2 Fingerprint Reader, Multiclass
2019.04 | | Quick installation guide Bosch Access Systems GmbH
1.5 Wiegand Connection
Control device
1
2
3
6
7
8
9
10
1 - WG Tamper NO
2 - WG Tamper COM
3 - WG Tamper NC
6 - WG D0
7 - WG D1
8 - WG GND
9 - TTL IN 1 (LED red)
10 - TTL IN 0 (LED green)
Gray (White stripe)
Green (White stripe)
Orange (White stripe)
Green
White
Black
Brown
Purple
1.6 UL 294 Requirements
The following UL 294 levels apply:
– Destructive attack - level 2
– Line security - level 2
– Endurance - level 1
– Standby power- level 1
If the unit is powered by an external power supply, you can use:
– UL Listed Class 2 power supply with 12VDC
– UL 294B Listed PoE power source
There are several conductors of size AWG 26.
Do not cover the conductors with a common cable jacket or equivalent.
Do not splice the lead to a conductor larger than 18 AWG (0.82 mm2).

ARD-FPBEW2-H2 Fingerprint Reader, Multiclass Connections | en 7
Bosch Access Systems GmbH Quick installation guide 2019.04 | |
1.7 Cables and connectors
* Cut the required wires off the connector plug.
Cable Cable name
A Wiegand cable
B Ethernet cable
C Power cable
D RS485 cable

8en | Connections ARD-FPBEW2-H2 Fingerprint Reader, Multiclass
2019.04 | | Quick installation guide Bosch Access Systems GmbH
Cable EN DE
Name Color Name Farbe
1 WG Tamper Rly NO Gray (white stripe) WG Tamper Rly NO Grau (weißer Streifen)
2 WG Tamper Rly COM Green (white stripe) WG Tamper Rly COM Grün (weißer Streifen)
3 WG Tamper Rly NC Orange (white stripe) WG Tamper Rly NC Orange (weißer Streifen)
4 Not used Blue Nicht in Verwendung Blau
Brown Braun
5 Not used Red Nicht in Verwendung Rot
Green Grün
6 WG D0 Green WG D0 Grün
7 WG D1 White WG D1 Weiß
8 WG GND Black WG GND Schwarz
9 TTL IN1 (LED red) Brown TTL IN1 (LED rot) Braun
10 TTL IN0 (LED green) Purple TTL IN0 (LED grün) Violett
11 PWR +VDC Red PWR +VDC Rot
12 Not used Pink Nicht in Verwendung Rosa
13 PWR GND Black (white stripe) PWR GND Schwarz (weißer Streifen)
14 485 TRXN (Rx Tx-) Yellow (black stripe) 485 TRXN (Rx Tx-) Gelb (schwarzer Streifen)
15 485 TRXP (Rx Tx+) Blue (white stripe) 485 TRXP (Rx Tx+) Blau (weißer Streifen)
16 485 PAG White (black stripe) 485 PAG Weiß (schwarzer Streifen)
17 ENET TXP White ENET TXP Weiß
18 ENET TXN Orange ENET TXN Orange
19 ENET RXP Black ENET RXP Schwarz
20 ENET RXN Yellow ENET RXN Gelb

ARD-FPBEW2-H2 Fingerprint Reader, Multiclass Connections | en 9
Bosch Access Systems GmbH Quick installation guide 2019.04 | |
Cable ES FR
Nombre Color Nom Couleur
1 WG Tamper Rly NO Gris (franja blanca) WG Tamper Rly NO Gris (bande blanche)
2 WG Tamper Rly COM Verde (franja blanca) WG Tamper Rly COM Vert (bande blanche)
3 WG Tamper Rly NC Naranja (franja blanca) WG Tamper Rly NC Orange (bande blanche)
4 No usado Azul Non utilisé Bleu
Marrón Brun
5 No usado Rojo Non utilisé Rouge
Verde Vert
6 WG D0 Verde WG D0 Vert
7 WG D1 Blanco WG D1 Blanc
8 WG GND Negro WG GND Noir
9 TTL IN1 (LED rojo) Marrón TTL IN1 (LED rouge) Brun
10 TTL IN0 (LED verde) Púrpura TTL IN0 (LED verte) Mauve
11 PWR +VDC Rojo PWR +VDC Rouge
12 No usado Rosa Non utilisé Rose
13 PWR GND Negro (franja blanca) PWR GND Noir (bande blanche)
14 485 TRXN (Rx Tx-) Amarillo (franja negra) 485 TRXN (Rx Tx-) Jaune (bande noire)
15 485 TRXP (Rx Tx+) Azul (franja blanca) 485 TRXP (Rx Tx+) Bleu (bande blanche)
16 485 PAG Blanco (franja negra) 485 PAG Noir (bande noire)
17 ENET TXP Blanco ENET TXP Blanc
18 ENET TXN Naranja ENET TXN Orange
19 ENET RXP Negro ENET RXP Noir
20 ENET RXN Amarillo ENET RXN Jaune

10 en | Connections ARD-FPBEW2-H2 Fingerprint Reader, Multiclass
2019.04 | | Quick installation guide Bosch Access Systems GmbH
Cable IT NL
Nome Colore Naam Kleur
1 WG Tamper Rly NO Grigio (striscia bianca) WG Tamper Rly NO Grijs (witte streep)
2 WG Tamper Rly COM Verde (striscia bianca) WG Tamper Rly COM Groen (witte streep)
3 WG Tamper Rly NC Arancione (striscia bianca) WG Tamper Rly NC Oranje (witte streep)
4 Non utilizzato Blu Niet gebruikt Blauw
Marrone Bruin
5 Non utilizzato Rosso Niet gebruikt Rood
Verde Groen
6 WG D0 Verde WG D0 Groen
7 WG D1 Bianco WG D1 Wit
8 WG GND Nero WG GND Zwart
9 TTL IN1 (LED rosso) Marrone TTL IN1 (LED rood) Bruin
10 TTL IN0 (LED verde) Viola TTL IN0 (LED groen) Paars
11 PWR +VDC Rosso PWR +VDC Rood
12 Non utilizzato Rosa Niet gebruikt Roze
13 PWR GND Nero (striscia bianca) PWR GND Zwart (witte streep)
14 485 TRXN (Rx Tx-) Giallo (striscia nera) 485 TRXN (Rx Tx-) Geel (zwarte streep)
15 485 TRXP (Rx Tx+) Blu (striscia bianca) 485 TRXP (Rx Tx+) Blauw (witte streep)
16 485 PAG Bianco (striscia nera) 485 PAG Wit (zwarte streep)
17 ENET TXP Bianco ENET TXP Wit
18 ENET TXN Arancione ENET TXN Oranje
19 ENET RXP Nero ENET RXP Zwart
20 ENET RXN Giallo ENET RXN Geel