Bosch VIP X1600 Module User manual

VIP X1600
Network Video Server
en Installation and Operating Manual

VIP X1600 Table of Contents | en 3
Bosch Security Systems Installation and Operating Manual V3.5 | 2007.12
Table of Contents
1Preface 7
1.1 About this Manual 7
1.2 Conventions in this Manual 7
1.3 Intended Use 7
1.4 EU Directives 8
1.5 Rating Plate 8
2 Safety Information 9
2.1 Electric Shock Hazard 9
2.2 Installation and Operation 9
2.3 Maintenance and Repair 9
3 Product Description 11
3.1 Scope of Delivery of VIP X1600 Base 11
3.2 Scope of Delivery of VIP X1600 Module 11
3.3 System Requirements 12
3.4 Overview of Functions 13
3.5 Connections and Displays 16
4 Installation 17
4.1 Preparations 17
4.2 Installing VIP X1600 Modules 17
4.3 Installing in a Switch Cabinet 19
4.4 Connections 21
4.5 Power On/Power Off 23
4.6 Setup Using the Configuration Manager 23
5 Configuration Using a Web Browser 25
5.1 Connecting 25
5.2 Configuration Menu 27
5.3 Identification 29
5.4 Camera Names 29
5.5 Display Stamping 30
5.6 Password 32
5.7 Language 33
5.8 Date/Time 33
5.9 Time Server 34
5.10 Picture Settings 36
5.11 Encoder Profile 37
5.12 Profile Configuration 39
5.13 Video Input 42
5.14 Audio (Audio Versions only) 43
5.15 JPEG Posting 44
5.16 Storage Medium 46
5.17 iSCSI 47

4en | Table of Contents VIP X1600
V3.5 | 2007.12 Installation and Operating Manual Bosch Security Systems
5.18 Partitioning 50
5.19 Recording Profiles 55
5.20 Recording Scheduler 57
5.21 Alarm Sources 59
5.22 Alarm Connections 60
5.23 VCA 63
5.24 Alarm E-Mail 68
5.25 Alarm Task Editor 70
5.26 Relay Settings 71
5.27 COM1 73
5.28 Network 75
5.29 Multicasting 79
5.30 Encryption 81
5.31 Version Information 83
5.32 Livepage Configuration 84
5.33 System State 87
5.34 Power Supply/Fans 87
5.35 Licenses 88
5.36 Maintenance 89
5.37 Function Test 91
6Operation 93
6.1 Operation with Microsoft Internet Explorer 93
6.2 The LIVEPAGE 95
6.3 Saving Snapshots 99
6.4 Recording Video Sequences 99
6.5 Running Recording Program 100
6.6 The RECORDINGS Page 101
6.7 Backup 104
6.8 Installing the Player 105
6.9 Hardware Connections Between Video Servers 106
6.10 Operation Using Software Decoders 108
7 Maintenance and Upgrades 109
7.1 Testing the Network Connection 109
7.2 Unit Reset 109
7.3 Repairs 110
7.4 Transfer and Disposal 110
8 Appendix 111
8.1 Troubleshooting 111
8.2 General Malfunctions 112
8.3 Malfunctions with iSCSI Connections 113
8.4 LEDs 114
8.5 Processor Load 114
8.6 Serial Interface 115
8.7 Terminal Block 115
8.8 Communication with Terminal Program 116

VIP X1600 Table of Contents | en 5
Bosch Security Systems Installation and Operating Manual V3.5 | 2007.12
9 Glossary 119
10 Specifications 123
10.1 VIP X1600 Base 123
10.2 VIP X1600 Module 124
10.3 Protocols/Standards 125
10.4 Image Refresh Rate 125
11 Index 127

6en | Table of Contents VIP X1600
V3.5 | 2007.12 Installation and Operating Manual Bosch Security Systems

VIP X1600 Preface | en 7
Bosch Security Systems Installation and Operating Manual V3.5 | 2007.12
1 Preface
1.1 About this Manual
This manual is intended for persons responsible for the installation and operation of the
VIP X1600. International, national and any regional electrical engineering regulations must be
followed at all times. Relevant knowledge of network technology is required. The manual
describes the installation and operation of the unit.
1.2 Conventions in this Manual
In this manual, the following symbols and notations are used to draw attention to special
situations:
1.3 Intended Use
The VIP X1600 network video server is intended for use with CCTV systems and serves to
transfer video and control signals via data networks (Ethernet LAN and Internet). Audio
signals can also be transmitted with the audio versions of the VIP X1600 modules. The
VIP X1600 modules each contain RAM memory for short-term recording of connected
cameras. Various functions can be triggered automatically by incorporating external alarm
sensors. Other applications are not permitted.
In the event of questions concerning the use of the unit which are not answered in this
manual, please contact your sales partner or:
Bosch Sicherheitssysteme GmbH
Robert-Koch-Straße 100
85521 Ottobrunn
Germany
www.bosch-sicherheitssysteme.de
!
CAUTION!
This symbol indicates that failure to follow the safety instructions described may endanger
persons and cause damage to the unit or other equipment.
It is associated with immediate, direct hazards.
i
NOTICE!
This symbol refers to features and indicates tips and information for easier, more convenient
use of the unit.

8en | Preface VIP X1600
V3.5 | 2007.12 Installation and Operating Manual Bosch Security Systems
1.4 EU Directives
The VIP X1600 network video server complies with the requirements of EU Directives 89/336
(Electromagnetic Compatibility) and 73/23, amended by 93/68 (Low Voltage Directive).
1.5 Rating Plate
For exact identification, the model name and serial number are inscribed on the bottom of the
VIP X1600 base and on the rating plates on the circuit boards of the VIP X1600 modules.
Please make a note of this information before installation if necessary so as to have it to hand
in case of questions or when ordering spare parts.

VIP X1600 Safety Information | en 9
Bosch Security Systems Installation and Operating Manual V3.5 | 2007.12
2 Safety Information
2.1 Electric Shock Hazard
– Never attempt to connect the unit to any power network other than the type for which it
is intended.
– Only use power supply units approved by Bosch Security Systems.
– Never open the housing of the power supply unit.
– Always install a VIP X1600 module in the appropriate VIP X1600 base housing only.
– If a fault occurs, disconnect the VIP X1600 from the power supply and from all other
units.
– Install the power supply and the unit only in a dry, weather-protected location.
– If safe operation of the unit cannot be ensured, remove it from service and secure it to
prevent unauthorized operation. In such cases, have the unit checked by Bosch Security
Systems.
Safe operation is no longer possible in the following cases:
– if there is visible damage to the unit or power cables,
– if the unit no longer operates correctly,
– if the unit has been exposed to rain or moisture,
– if foreign bodies have penetrated the unit,
– after long storage under adverse conditions, or
– after exposure to extreme stress in transit.
2.2 Installation and Operation
– The relevant electrical engineering regulations and guidelines must be complied with at
all times during installation.
– Relevant knowledge of network technology is required to install the unit.
– Before installing or operating the unit, make sure you have read and understood the
documentation for the other equipment connected to it, such as cameras. The
documentation contains important safety instructions and information about permitted
uses.
– Perform only the installation and operation steps described in this manual. Any other
actions may lead to personal injury, damage to property or damage to the equipment.
2.3 Maintenance and Repair
– Never open the housing of a VIP X1600 base. The unit does not contain any user-
serviceable parts. Remove only the supplied cover when installing a VIP X1600 module.
– Do not change any components in a VIP X1600 base or VIP X1600 module. The units do
not contain any user-serviceable parts.
– Never open the housing of the power supply unit. The power supply unit does not contain
any user-serviceable parts.
– Ensure that all maintenance or repair work is carried out only by qualified personnel
(electrical engineers or network technology specialists).

10 en | Safety Information VIP X1600
V3.5 | 2007.12 Installation and Operating Manual Bosch Security Systems

VIP X1600 Product Description | en 11
Bosch Security Systems Installation and Operating Manual V3.5 | 2007.12
3 Product Description
3.1 Scope of Delivery of VIP X1600 Base
– VIP X1600 base
– Mounting kit for installation in 19-inch racks
– Self-adhesive elastic bumpers
– Quick Installation Guide
– Product CD with the following content:
– Quick Installation Guide
–Manual
– System Requirements document
– Further documentation on Bosch Security Systems products
– Configuration Manager
– MPEG ActiveX control
– Player and Archive Player
– DirectX control
– Microsoft Internet Explorer
– Sun JVM
– Adobe Acrobat Reader
3.2 Scope of Delivery of VIP X1600 Module
– VIP X1600 module
– Mounting kit for installation in the VIP X1600 base
– Terminal plugs
– Quick Installation Guide
i
NOTICE!
Check that the delivery is complete and in perfect condition. Have your unit checked by Bosch
Security Systems if you detect any damage.

12 en | Product Description VIP X1600
V3.5 | 2007.12 Installation and Operating Manual Bosch Security Systems
3.3 System Requirements
3.3.1 General Requirements
– Computer with Windows 2000 or Windows XP operating system
– Network access (Intranet or Internet)
– Screen resolution 1,024 × 768 pixels
– 16- or 32-bit color depth
– Installed Sun JVM
3.3.2 Additional Configuration Requirements
– Microsoft Internet Explorer (version 6.0 or higher)
or
– Installed Configuration Manager program (version 1.60 or higher)
3.3.3 Additional Operational Requirements
– Microsoft Internet Explorer (version 6.0 or higher)
or
– Receiver software, for example VIDOS (version 3.11 or higher) or Bosch Video
Management System
or
– MPEG-4 compatible hardware decoder from Bosch Security Systems (for example
VIP XD) as a receiver and connected video monitor
– For playing back recordings: connection to storage medium
i
NOTICE!
Also note the information in the System Requirements document on the product CD
supplied. If necessary, you can install the required programs and controls from the product
CD supplied (see Section 3.2 Scope of Delivery of VIP X1600 Module, page 11).
You can find notes on using Microsoft Internet Explorer in the online Help in Internet Explorer.

VIP X1600 Product Description | en 13
Bosch Security Systems Installation and Operating Manual V3.5 | 2007.12
3.4 Overview of Functions
3.4.1 Network Video Server
The VIP X1600 is a network video server for up to 16 independent video channels in four
VIP X1600 modules. It is primarily designed for encoding video and control data for transfer
over an IP network. Audio signals can also be transmitted to compatible units with the audio
versions of the VIP X1600 modules.
The use of existing networks means that integration with CCTV systems or local networks can
be achieved quickly and easily.
The VIP X1600 offers a 2/3 D1 or 2CIF resolution at a complete image rate of 25 (PAL) or
30 (NTSC) images per second for up to 16 channels.
Two units, a VIP X1600 as a sender and a VIP XD as a receiver, for example, can create a
standalone system for data transfer without a PC. Video images from a single sender can be
received simultaneously on multiple receivers.
The VIP X1600 modules are designed for installation in the VIP X1600 base. Installing the units
is a quick and easy operation that does not require any additional tools. All modules are hot
swappable and can be exchanged while the system is running
3.4.2 Receiver
Compatible MPEG-4 enabled hardware decoders such as VIP XD can be used as receivers.
Computers with decoding software installed, such as VIDOS, or computers with the Microsoft
Internet Explorer Web browser can also be used as receivers.
3.4.3 Video Encoding
The VIP X1600 uses the MPEG-4 video compression standard. Thanks to efficient encoding,
the data rate remains low even with high image quality and can also be adapted to local
conditions within wide limits. In this manner, the simultaneous coding of all 16 video channels
is supported.
3.4.4 Dual Streaming
Dual Streaming allows the incoming data stream to be encoded simultaneously according to
two different, individually customized profiles. This feature creates two data streams per
camera that can serve different purposes, for example one for recording and one optimized
for transmission over the LAN.
3.4.5 Multicast
In suitably configured networks, the multicast function enables simultaneous real-time video
transmission to multiple receivers. The UDP and IGMP V2 protocols must be implemented on
the network for this function.
3.4.6 Encryption
The VIP X1600 offers a variety of options for protection against unauthorized reading. Web
browser connections can be protected using HTTPS. You can protect the control channels via
the SSL encryption protocol. With an additional license, the user data itself can be encrypted.

14 en | Product Description VIP X1600
V3.5 | 2007.12 Installation and Operating Manual Bosch Security Systems
3.4.7 Remote Control
For remote control of external units such as pan or tilt heads for cameras or motorized zoom
lenses, control data is transmitted via the VIP X1600's bidirectional serial interface. This
interface can also be used to transmit transparent data.
3.4.8 Tamper Detection and Motion Detectors
The VIP X1600 offers a wide range of configuration options for alarm signaling in the event of
tampering with the connected cameras. An algorithm for detecting movement in the video
image is also part of the scope of delivery and can optionally be extended to include special
video analysis algorithms.
3.4.9 Snapshots
Individual video images (snapshots) can be called up from the VIP X1600, stored on the
computer's hard drive or displayed in a separate browser window in JPEG format.
3.4.10 Backup
A function for storing the video images displayed on the hard drive of your computer is
available on the LIVEPAGE as well as on the RECORDINGS page. Video sequences can be
stored by means of a mouse click and can be redisplayed using the Player supplied as part of
the scope of delivery.

VIP X1600 Product Description | en 15
Bosch Security Systems Installation and Operating Manual V3.5 | 2007.12
3.4.11 Summary
The VIP X1600 offers the following main functions:
– Up to 16 independent analog BNC composite video inputs (PAL/NTSC)
– Video and data transmission over IP data networks
– Dual Streaming function for each video input for simultaneous encoding with two
individually definable profiles
– Multicast function for simultaneous image transmission to multiple receivers
– Video encoding to international standard MPEG-4
– Two redundant integrated Ethernet ports (10/100/1000 Base-T)
– Transparent, bidirectional data channel via RS232/RS422/RS485 serial interface
– Configuration and remote control of all internal functions via TCP/IP, also secured via
HTTPS
– Password protection to prevent unauthorized connection or configuration changes
– Extensive, flexible storage options
– Four alarm inputs and four relay outputs per VIP X1600 module
– Built-in video sensor for motion and tamper alarms
– Event-controlled automatic connection
– Optional completely redundant power supply
– Option for redundant network connection or direct connection to iSCSI system
– Convenient maintenance via uploads
– Flexible encryption of control and data channels
– Authentication according to international standard 802.1x
The audio versions of the VIP X1600 modules also offer:
– Audio signal transmission via IP data networks
– Audio encoding to international standard G.711

16 en | Product Description VIP X1600
V3.5 | 2007.12 Installation and Operating Manual Bosch Security Systems
3.5 Connections and Displays
1Installed VIP X1600 module
2AudioIn1/2and Audio In 3/4 audio line inputs (mono)
3.5 mm / 0.14 in stereo sockets line-out for connecting audio cables
(only audio versions of the VIP X1600 modules)
3Terminal block
for alarm inputs, relay outputs and serial interface
4VideoIn1to Video In 4 video inputs
BNC sockets for connecting video sources
5Cover for vacant slot
6Sockets for connecting one or two power supply units
7ETH1RJ45 socket
for connecting to an Ethernet LAN (local network), 10/100/1000 MBit Base-T
8ETH2RJ45 socket
for a redundant connection to the network or to an iSCSI system
9LEDs, status information for the VIP X1600 modules and the VIP X1600 base
i
NOTICE!
For more information about the LEDs, see Section 8.4 LEDs, page 114.
For terminal block assignment, see Section 8.7 Terminal Block, page 115.

VIP X1600 Installation | en 17
Bosch Security Systems Installation and Operating Manual V3.5 | 2007.12
4 Installation
4.1 Preparations
The VIP X1600 modules are solely intended for installation in the VIP X1600 base. Installing
the units is a quick and easy operation that does not require any additional tools.
The VIP X1600 is designed for installation in a switch cabinet. Mounting the unit in a 19-inch
rack using the installation material supplied is a quick and easy operation.
It is also possible to operate this as a desktop unit. The four elastic bumpers included in the
scope of delivery ensure a non-slip support.
Please ensure the following installation conditions:
– Do not install the unit close to heaters or other heat sources. Avoid locations exposed to
direct sunlight.
– Allow sufficient space for running cables.
– Ensure that the unit has adequate ventilation. Bear the total heat output in mind,
particularly when installing multiple units in a switch cabinet.
– When making connections, use only the cables supplied or use appropriate cables
immune to electromagnetic interference.
– Position and run all cables so that they are protected from damage, and provide
adequate cable strain relief where needed.
– Avoid impacts, blows and severe vibrations as these can irreparably damage the unit.
4.2 Installing VIP X1600 Modules
Installing the different VIP X1600 modules in the VIP X1600 base is described in the relevant
Quick Installation Guide. Please also take note of the following basic notes when installing a
unit.
!
CAUTION!
The unit is designed for indoor operation.
Select a suitable location for installation that guarantees to meet the environmental
conditions. The ambient temperature must be between 0 and +50 °C (+32 and +122 °F). The
relative humidity must be between 20% and 80% (non-condensing).
The VIP X1600 generates heat during operation. During installation, please note the maximum
heat value of 205 BTU/h. Ensure that there is adequate ventilation and enough clearance
between the unit and heat-sensitive objects or equipment.
!
CAUTION!
Do not install a VIP X1600 module in a different housing and do not operate the unit outside of
the VIP X1600 base. The ambient temperature during installation must be between
0 and +50 °C (+32 and +122 °F), and the relative humidity must not exceed 80% (non-
condensing).

18 en | Installation VIP X1600
V3.5 | 2007.12 Installation and Operating Manual Bosch Security Systems
4.2.1 Installation Sequence and Capacity of the VIP X1600 Base
You can install up to four VIP X1600 modules in a VIP X1600 base. Slot 1 must always be the
first slot that is populated. The remaining slots can be populated in any order desired. It is
also possible to install and remove modules during operation.
4.2.2 Cooling
The installed VIP X1600 modules generate a high volume of heat during operation. As a result,
it is essential that a functional heat dissipation system is in place for problem-free operation
of a VIP X1600.
4.2.3 Rating Plates
Every VIP X1600 module has a label on the circuit board containing a printed MAC address by
which the module can be uniquely identified. Take note of this MAC address and the location
in the VIP X1600 base before installation so that you can later identify the module, even after
it has been inserted, for example when performing fault diagnosis.
4.2.4 Removing and Exchanging VIP X1600 Modules
It is also possible to install, remove and exchange modules during operation.
1. Before removing a module, terminate all recordings currently running in this module.
2. When installing a module, please ensure that the cover is kept for future use.
3. When removing a module, it is essential that the corresponding slot be closed with the
cover if a module is no longer to be used in this slot.
!
CAUTION!
Ensure that Slot 1 is always populated by a module, even when modifying the installation.
Malfunctions may occur when the VIP X1600 is switched on without a functional module in
Slot 1.
!
CAUTION!
Whenever the installation is modified, or modules are exchanged or supplemented, it is
essential that all unpopulated slots are properly covered on the rear side of the VIP X1600
base.
!
CAUTION!
Ensure that Slot 1 is always populated by a module, even when modifying the installation.
Malfunctions may occur when the VIP X1600 is switched on without a functional module in
Slot 1.

VIP X1600 Installation | en 19
Bosch Security Systems Installation and Operating Manual V3.5 | 2007.12
4.3 Installing in a Switch Cabinet
4.3.1 Preparations
The VIP X1600 is set up for installation in a 19-inch rack. The necessary installation equipment
is included in the scope of delivery.
When installing in a switch cabinet, ensure that the screw joints are free of tension and
subject to as little mechanical stress as possible. Ensure that the unit and the power supply
units have sufficient grounding.
4.3.2 Installing and Connecting the VIP X1600
1. Prepare the switch cabinet in such a manner that you are easily able to insert the
VIP X1600 directly at the installation point.
2. Place the cage nuts in the corresponding drillings or spaces in the switch cabinet frame.
3. Lift the VIP X1600 into the switch cabinet frame and insert the fastening screws together
with the washers.
4. Tighten the screws one after the other and then check once more that all the screws are
tight.
5. Connect one or two power supply units to the sockets on the rear of the housing and
hand tighten the coupling nuts for the plug.
!
CAUTION!
When installing in a switch cabinet, ensure that there is sufficient ventilation for the unit.
There must be at least 5 cm (1.97 in.) of free space to the left and right of the unit and at least
10 cm (3.94 in.) at the rear.
The VIP X1600 generates heat during operation. During installation, please note the maximum
heat value of 205 BTU/h.
When mounting additional units, direct contact with the VIP X1600 is permitted provided that
the surface temperature of the adjacent units does not exceed +50 °C (+122 °F).
!
CAUTION!
Only use power supply units approved by Bosch Security Systems.

20 en | Installation VIP X1600
V3.5 | 2007.12 Installation and Operating Manual Bosch Security Systems