Bosch UMM-LW-20B Installation instructions manual

Universal Monitor Mounts
UMM-LW-20B | UMM-LW-30B
en Mounting Guide

ii en | Table of Contents Universal Monitor Mounts
F.01U.115.026 | 3.0 | 2008.12 Mounting Guide Bosch Security Systems, Inc.
Table of Contents
1Unpacking1
2 Universal Monitor Mount Models 1
2.1 UMM-LW-20B Fixed Wall Mount 2
2.1.1 Parts List 4
2.1.2 Installing the UMM-LW-20B Fixed Wall Mount 5
2.2 UMM-LW-30B Tilt/Swivel Wall Mount 9
2.2.1 Parts List 11
2.2.2 Installing the UMM-LW-30B Tilt/Swivel Wall Mount 12
3 Dimensional Drawings 16
3.1 UMM-LW-20B Fixed Wall Mount 16
3.2 UMM-LW-30B Tilt/Swivel Wall Mount 17
3.3 UMM Series Component Dimensions 18

Universal Monitor Mounts Unpacking | en 1
Bosch Security Systems, Inc. Mounting Guide F.01U.115.026 | 3.0 | 2008.12
1 Unpacking
This equipment should be unpacked and handled with care. If an item appears to
have been damaged in shipment, notify the shipper. Verify that all parts shown in
the Parts List are included. If any items are missing, notify your Bosch Security
Systems Sales or Customer Service Representative.
The original packing carton is the safest container in which to transport the unit.
Save it for possible future use.
2 Universal Monitor Mount Models
The Bosch series of Universal Monitor Mounts (UMM) are designed to mount any
VESA®-compliant monitor to a wall. The two types of mounts offered in the series
of Universal Monitor Mounts (UMM) are the UMM-LW-20B and the UMM-LW-30B.

2en | Universal Monitor Mount Models Universal Monitor Mounts
F.01U.115.026 | 3.0 | 2008.12 Mounting Guide Bosch Security Systems, Inc.
2.1 UMM-LW-20B Fixed Wall Mount
The UMM-LW-20B is a fixed wall mount that is designed for use with any Bosch
LCD flat-screen monitor. The mount moves the monitor 1.5 cm (0.59 in.) off of the
wall.
Figure 2.1 UMM-LW-20B Fixed Wall Mount

Universal Monitor Mounts Universal Monitor Mount Models | en 3
Bosch Security Systems, Inc. Mounting Guide F.01U.115.026 | 3.0 | 2008.12
Table 2.1 UMM-LW-20B Specifications
Maximum Weight
Capacity:
12 kg (26.5 lbs)
Monitor Mounting
Holes:
VESA 75 (75 mm) and VESA 100 (100 mm)
Material: Steel
Color: Black
Swivel Adjustment: 360°
Recommended
Mounting Surface:
Solid concrete with a recommended strength of
3600 psi or 25 Mpa.
Hollow cinder block.
Minimum 2-in. x 4-in. wood stud with maximum 0.5-
in. thick wallboard.
3/4-in. construction grade plywood.

4en | Universal Monitor Mount Models Universal Monitor Mounts
F.01U.115.026 | 3.0 | 2008.12 Mounting Guide Bosch Security Systems, Inc.
2.1.1 Parts List
The following table lists the components for the mount:
UMM-LW-20B
Qty Description Illustration
1 VESA mounting plate (A) and wall bracket (B)
(see Figure 3.1 on page 16 for a dimensional drawing)
2 1/4 x 2.0 in. Wedge anchors (C)
(see Figure 3.3 on page 18 for a dimensional drawing)
2 1/2 x 2.0 in. Wood screws (D)
(see Figure 3.3 on page 18 for a dimensional drawing)

Universal Monitor Mounts Universal Monitor Mount Models | en 5
Bosch Security Systems, Inc. Mounting Guide F.01U.115.026 | 3.0 | 2008.12
2.1.2 Installing the UMM-LW-20B Fixed Wall Mount
To install the wall mount:
1. Disassemble the mounting plate (A) from the wall bracket by removing the
lock screw from the wall bracket (B). Retain the lock screw for later use.
2. Determine the location on the wall that you will attach the wall bracket. Use
Table 2.1, on page 3, for recommended mounting surfaces.
4 M4 x 10 mm screws (E)
(see Figure 3.4 on page 19 for a dimensional drawing)
1 Level (F)
UMM-LW-20B

6en | Universal Monitor Mount Models Universal Monitor Mounts
F.01U.115.026 | 3.0 | 2008.12 Mounting Guide Bosch Security Systems, Inc.
3. Place the wall bracket (B) against the wall, as illustrated below, and use the
level (F) to ensure that the bracket is level.
Figure 2.2 Wall bracket with level
4. Use the wall bracket as a template to mark the mounting holes on the wall.
5. Attach the wall bracket (B) to the wall.
a. Use the two (2) wedge anchors (C) to attach the wall bracket to
concrete or to a cinder block.
b. Use the two (2) wood screws (D) to attach the wall bracket to a stud
behind wallboard or to construction-grade plywood.

Universal Monitor Mounts Universal Monitor Mount Models | en 7
Bosch Security Systems, Inc. Mounting Guide F.01U.115.026 | 3.0 | 2008.12
6. Attach the VESA mounting plate (A) to the back of the flat-panel LCD manual
using the four (4) M4 x 10 mm screws (E).
Figure 2.3 Attach the VESA monitor plate
7. Carefully slide the mounting plate into the slots of the wall bracket.
Figure 2.4 Attach monitor plate to wall bracket
75
75
100
100

8en | Universal Monitor Mount Models Universal Monitor Mounts
F.01U.115.026 | 3.0 | 2008.12 Mounting Guide Bosch Security Systems, Inc.
8. Tighten the lock screw, located on the right side of the wall bracket, using a
Phillips head screw driver.
Figure 2.5 Lock screw on the wall bracket