Bosch FLEXIDOME IP micro 5000 User manual

1
4
“This product is intended to be supplied by a Listed Power Unit marked
“Class 2”, “LPS”, or “Limited Power Source” and output rated 12Vdc, 0.
32A minimum; or 24Vdc, 0.16A minimum.”
elbmessasiD
)rewoP(krowteN
x3
2
RJ45
Ethernet (PoE)
5 mm
(0.2 in)
12 VDC
24 VDC
22AWG
Stick Desiccant
FLEXIDOME IP micro 5000 - Quick Installation Guide
NUC-51022-F4, NUC-51051-F4, NUC-51022-F2, NUC-51051-F2
microSDHC Card
(SD card does not include in the package)
3
M3 Screw
Ø 6 mm
x2
x2
tnuoM
CABLE
0
90
180
270
Outer 6.0mm 2 Holes
For Plastic Anchor
Camera
Outline
Cut Line
Inner 2.5mm 2 Holes
For M3 Type Screws
FRONT
FRONT
FRONT
FRONT
Desiccant
Find it in the package
Desiccant
The desiccant must be seated to the indicated position.
Improper positioning could lead to interference with
the camera module.

6
7 8
Default IP: 192.168.0.1
Adjust
5Adjust
S1460
Monitor Cable
Analog video out
Pan
±175°
Tilt
±70°
Rotation
±180°
NOTE: The angle of rotation should NOT be rotated over
180° in clockwise and 180° in counter clockwise.
F.01U.288.440
Bosch Video ClientAdjust
NOTE: To use tree mark for easy adjustment in image
direction.
Bosch Security Systems BV, Torenallee 49, 5617BA,
Eindhoven,The Netherlands
http://www.boschsecurity.com/catalog_overview.htm