BOSER Technology HS-2620 User manual

HS-2620
Intel® Core™ 2 Duo Mobile processor
Embedded Engine Board
•CompactFlash•CRT/LVDS•Dual GB LAN•
•Audio•SATAII•ATA/33/66•USB2.0•
•WDT•H/W Monitor•

Copyright Disclaimers
The accuracy of contents in this manual has passed thorough checking and review before
publishing. BOSER Technology Co., Ltd., the manufacturer and publisher, is not liable for
any infringements of patents or other rights resulting from its use. The manufacturer will
not be responsible for any direct, indirect, special, incidental or consequential
damages arising from the use of this product or documentation, even if advised of
the possibility of such damage(s).
This manual is copyrighted and BOSER Technology Co., Ltd. reserves all
documentation rights. Unauthorized reproduction, transmission, translation, and
storage of any form and means (i.e., electronic, mechanical, photocopying, recording)
of this document, in whole or partly, is prohibited, unless granted permission by BOSER
Technology Co., Ltd.
BOSER Technology Co., Ltd. reserves the right to change or improve the contents of
this document without due notice. BOSER Technology Co., Ltd. assumes no
responsibility for any errors or omissions that may appear in this manual, nor does
it make any commitment to update the information contained herein.
T
T
Tr
r
ra
a
ad
d
de
e
em
m
ma
a
ar
r
rk
k
ks
s
s
BOSER is a registered trademark of BOSER Technology Co., Ltd.
ISB is a registered trademark of BOSER Technology Co., Ltd.
Intel is a registered trademark of Intel Corporation.
Award is a registered trademark of Award Software, Inc.
AWARD is a registered trademark of AWARD Software, Inc.
All other trademarks, products and or product names mentioned herein are
mentioned for identification purposes only, and may be trademarks and/or
registered trademarks of their respective companies or owners.
© Copyright 2008 BOSER Technology Co., Ltd.
All Rights Reserved.
Edition 1.0, May 19, 2009

Table of Contents
Chapter 1 General Description ..................................1
1.1 Major Features....................................................................... 2
1.2 Specifications ........................................................................ 2
1.3 Board Dimensions................................................................. 4
Chapter 2 Unpacking ..................................................5
2.1 Opening the Delivery Package............................................. 5
2.2 Inspection............................................................................... 5
Chapter 3 Hardware Installation ..............................7
3.1 Before Installation ................................................................. 7
3.2 Board Layout ......................................................................... 8
3.3 Jumper List ............................................................................ 9
3.4 Connector List ....................................................................... 9
3.5 Configuring the CPU ............................................................. 9
3.6 System Memory ..................................................................... 9
3.7 VGA Controller .................................................................... 10
3.8 Enhanced IDE Connector ................................................... 12
3.9 Serial ATAII Connector ....................................................... 13
3.10 Serial Port Connectors ....................................................... 13
3.11 Ethernet Connector............................................................. 14
3.12 USB Connector.................................................................... 14
3.13 CMOS Clear Jumper............................................................ 15
3.14 Power and Fan Connectors................................................ 15
3.15 Keyboard/Mouse Connectors ............................................ 16
3.16 System Front Panel Control ............................................... 16
3.17 Watchdog Timer .................................................................. 16
3.18 Audio Connectors ............................................................... 18
3.19 CompactFlashConnector................................................ 19

Chapter 4 Award BIOS Setup ................................. 21
4.1 Starting Setup...................................................................... 21
4.2 Using Setup ......................................................................... 22
4.3 Main Menu............................................................................ 23
4.4 Standard CMOS Features................................................... 24
4.5 Advanced BIOS Features ................................................... 25
4.6 Advanced Chipset Features............................................... 26
4.7 Integrated Peripherals ........................................................ 27
4.8 Power Management Setup ................................................. 29
4.9 PnP/PCI Configurations...................................................... 30
4.10 PC Health Status ................................................................. 31
4.11 Frequency/Voltage Control ................................................ 31
Chapter 5 Software Utilities..................................... 33
5.1 IDE Driver Installation ......................................................... 33
5.2 VGA Driver Installation ....................................................... 36
5.3 Audio Driver Installation..................................................... 39
5.4 LAN Driver Installation........................................................ 41

Declaration of Conformity -- CE Mark
BOSER Technology hereby acknowledges that compliance testing in
accordance with applicable standards of the EU’s EMC Directive,
89/336/EEC, was successfully completed on a sample of the equipment
identified below:
Equipment Class: Information Technology Equipment
Product Model Series: HS-2620
This Product Complies With: EN55022: Class A for Radiated emissions
EN50082-2: Heavy Industrial EMC Immunity
We, the undersigned, hereby declare that the equipment specified above
conforms to the above directives and standards.
Manufacturer:
BOSER TECHNOLOGY CO., LTD.

Safety Instructions
Integrated circuits on computer boards are sensitive to static electricity. To
avoid damaging chips from electrostatic discharge, observe the following
precautions:
 Do not remove boards or integrated circuits from their anti-static packaging
until you are ready to install them.
 Before handling a board or integrated circuit, touch an unpainted portion of
the system unit chassis for a few seconds. This helps to discharge any static
electricity on your body.
 Wear a wrist-grounding strap, available from most electronic component
stores, when handling boards and components. Fasten the ALLIGATOR clip
of the strap to the end of the shielded wire lead from a grounded object.
Please wear and connect the strap before handle the product to ensure
harmlessly discharge any static electricity through the strap.
 Please use an anti-static pad when putting down any components or parts or
tools outside the computer. You may also use an anti-static bag instead of
the pad. Please inquire from your local supplier for additional assistance in
finding the necessary anti-static gadgets.
NOTE: DO NOT TOUCH THE BOARD OR ANY OTHER SENSITIVE
COMPONENTS WITHOUT ALL NECESSARY ANTI-STATIC
PROTECTIONS.

1
Chapter 1
General Description
The HS-2620 is an Intel® GME965 GMCH/ICH8-M chipset-based
board designed. The HS-2620 is an ideal all-in-one embedded engine
board. Additional features include an enhanced I/O with CF,
CRT/LVDS, dual GB LAN, audio, 1 SATAII, 2 COM, and USB2.0
interfaces.
Designed with the Intel® GME965 GMCH, the board supports Intel®
Core™ 2 Duo Mobile processor by Merom Socket P series.
Its onboard ATA/33/66 to IDE drive interface architecture allows the
HS-2620 to support data transfers of 33, and 66MB/sec. to one IDE
drive connection. The Intel® ICH8-M provides SATAII function with
two ports supports transfer rates up to 300MB/sec.
Onboard Intel® GME965 GMCH controller with DVMT4.0 provides
CRT display interface. It also supports 24-bit single channel/48-bit dual
channel LVDS interface.
System memory is also sufficient with the one DDR2 SO-DIMM socket
that can support up to 2GB.
Additional onboard connectors include four USB2.0 ports providing
faster data transmission. And two external RJ-45 connectors for
10/100/1000 Based Ethernet uses.

2
To ensure the reliability in an unmanned or standalone system, the
watchdog timer (WDT) onboard HS-2620 is designed with software
that does not need the arithmetical functions of a real-time clock chip. If
any program causes unexpected halts to the system, the onboard WDT
will automatically reset the CPU or generate an interrupt to resolve
such condition.
1.1 Major Features
The HS-2620 comes with the following features:
 Intel® Core™ 2 Duo Mobile processor *Merom Socket P Series)
 Supports 800/533MHz FSB
 One DDR2 SO-DIMM socket with a max. capacity of 2GB
 Intel® GME965 GMCH/ICH8-M chipset
 Winbond W83627DHG super I/O chipset
 Intel® GME965 graphics controller
 24-bit/48-bit LVDS panel display interface
 Dual Marvell Yukon™ 88E8053 PCI Express Ethernet controller
 RealTek ALC883 7.1CH 3D audio interface
 Intel® ICH8-M Serial ATAII controller
 CF, 2 COM, 4 USB2.0
 Hardware Monitor function
1.2 Specifications
 CPU: Intel® Core™ 2 Duo Mobile processor (Merom Socket P Series)
 Front Side Bus: 800/533MHz FSB
 Memory: One DDR2 SO-DIMM socket supports 533/667MHz FSB up to
2GB
 Chipset: Intel® GME965 GMCH/ICH8-M
 I/O Chipset: Winbond W83627DHG
 CompactFlash: One, Type I/II IDE interface adapter
 VGA: Intel® GME965 with DVMT4.0 supports up to 256MB video
memory
 LVDS Panel: Supports 24-bit single channel/48-bit dual channel LVDS
interface
 Ethernet: Dual Marvell Yukon™ 88E8053 PCI Express 10/100/1000
Based LAN
 Audio: RealTek ALC883 7.1CH 3D audio interface
 Serial ATAII: Intel® ICH8-M controller and with two ports supports a
transfer rate up to 300MB/sec.

3
 IDE: One 2.54-pitch 40-pin IDE connector
 Serial Port: 16C550 UART-compatible RS-232 x 2 serial ports with
16-byte FIFO
 USB: 4 USB2.0 ports, internal x 2 and external x 2
 Keyboard/Mouse: PS/2 6-pin Mini DIN keyboard/mouse connector
 BIOS: Award BIOS with 8Mb SPI ROM
 Watchdog Timer: Reset 1sec. ~ 255min. and 1sec. or 1min./step
 CMOS: Battery backup
 Hardware Monitor: Winbond W83627DHG
 Board Size: 146(L) x 102(W) mm

4
1.3 Board Dimensions

5
Chapter 2
Unpacking
2.1 Opening the Delivery Package
The HS-2620 is packed in an anti-static bag. The board has
components that are easily damaged by static electricity. Do not
remove the anti-static wrapping until proper precautions have been
taken. Safety Instructions in front of this manual describe anti-static
precautions and procedures.
2.2 Inspection
After unpacking the board, place it on a raised surface and carefully
inspect the board for any damage that might have occurred during
shipment. Ground the board and exercise extreme care to prevent
damage to the board from static electricity.
Integrated circuits will sometimes come out of their sockets during
shipment. ExAwardne all integrated circuits, particularly the BIOS,
processor, memory modules, ROM-Disk, and keyboard controller chip
to ensure that they are firmly seated. The HS-2620 delivery package
contains the following items:
 HS-2620 Board x 1
 Utility CD Disk x 1
 Cables Package x 1
 Jumper Bag x 1
 User’s Manual

6
Cables Package
NO. Description
1 COM flat cable x 1
2 Two USB flat cable with bracket x 1
3 IDE flat cable x 1
4 SATA cable x 1
5 KB/MS transfer cable x 1
6 Power cable x 1
It is recommended that you keep all the parts of the delivery package
intact and store them in a safe/dry place for any unforeseen event
requiring the return shipment of the product. In case you discover any
missing and/or damaged items from the list of items, please contact
your dealer immediately.

7
Chapter 3
Hardware Installation
This chapter provides the information on how to install the hardware
using the HS-2620. This chapter also contains information related to
jumper settings of switch, and watchdog timer selection etc.
3.1 Before Installation
After confirming your package contents, you are now ready to install
your hardware. The following are important reminders and steps to
take before you begin with your installation process.
1. Make sure that all jumper settings match their default settings
and CMOS setup correctly. Refer to the sections on this chapter
for the default settings of each jumper. (Set JP2 open)
2. Go through the connections of all external devices and make
sure that they are installed properly and configured correctly
within the CMOS setup. Refer to the sections on this chapter
for the detailed information on the connectors.
3. Keep the manual and diskette in good condition for future
reference and use.

8
3.2 Board Layout

9
3.3 Jumper List
Jumper Default Setting Setting Page
JP1 LVDS BL Control: Full Light Open 10
JP2 Clear CMOS: Normal Operation Open 15
3.4 Connector List
Connector Definition Page
CN1 External USB2.0 Port 14
CN2 15-pin CRT Connector 10
CN8/CN4 RJ-45 Connector 14
CN10 PS/2 6-pin Mini DIN KB/MS Connector 16
COM1/COM2 COM 1/COM 2 Connector (5x2 header) 13
LVDS1 Inverter Power In Connector 10
LVDS2 LVDS Panel Connector 10
USB1 Internal USB2.0 Port 14
CD1 MIC Out/Line Out Connector 18
CD2 Line In Connector 18
PWR1 10-pin ATX Power In Connector 15
PANEL1 System Front Panel Control 16
CPU_FAN1 CPU Fan Power In Connector 15
SYS_FAN1 System Fan Power In Connector 15
SATA0/SATA1 Serial ATA Connector 13
IDE1 IDE Connector 12
CF1 CompactFlash Connector 19
DIMM SO-DDRII Socket 9
SW1 Reset Button ----
3.5 Configuring the CPU
The HS-2620 supports Intel® Core™ 2 Duo Socket P Mobile processor
with 800MHz/533MHz FSB speed (Intel 7500/7300/7100/Celeron®
550/Celeron® 530).
3.6 System Memory
The HS-2620 provides one DDR2 SO-DIMM socket. The maximum
capacity was 2GB (DDR2 667/533).

10
3.7 VGA Controller
The HS-2620 provides two connection methods of a VGA device. CN2
offers a single standard CRT connector and LVDS2 is the LVDS
interface connectors onboard reserved for Flat panel Display.
 CN2: CRT Connector
PIN Description PIN Description
1 Red 2 Green
3 Blue 4 N/C
5 GND 6 GND
7 GND 8 GND
9 +5V 10 GND
11 N/C 12 SDA
13 HSYNC 14 VSYNC
15 SCK
1
515
10
611
 LVDS1: Inverter Power In Connector
PIN Description
1 +12V
2 +12V
3 +5V
4 +5V
5 VDDEN
6 GND
16
 JP1: LVDS BL Control
Options Settings
Full Light (default) Open
BL bt BLADJ Control Short
2
1

11
 LVDS2: LVDS Interface Connector
PIN Description PIN Description
1 +3V 2 +5V
3 +3V 4 +5V
5 LCTLA_CLK_L 6 LCTLB_DATA_L
7 LDDC_CLK_L 8 LCDC_DATA_L
9 GND 10 GND
11 LBCLKP 12 LACLKP
13 LBCLKN 14 LACLKN
15 GND 16 GND
17 LBDATAN0 18 LADATAP0
19 LBDATAP0 20 LADATAN0
21 GND 22 GND
23 LBDATAN1 24 LADATAP1
25 LBDATAP1 26 LADATAN1
27 GND 28 GND
29 LBDATAN2 30 LADATAP2
31 LBDATAP2 32 LADATAN2
33 GND 34 GND
35 LBDATAN3 36 LADATAP3
37 LBDATAP3 38 LADATAN3
39 +12V 40 +12V
NOTE: LVDS cable should be produced very carefully. Y0- & Y0+ have to
be fabricated in twister pair (Y1- & Y1+, Y2- & Y2+ and so on)
otherwise the signal won’t be stable.

12
3.8 Enhanced IDE Connector
IDE1 is a standard 2.0-pitch 44-pin connector daisy-chain driver
connector serves the PCI E-IDE drive provisions onboard the HS-2620.
A maximum of two ATA/33/66 IDE drives can be connected to the
HS-2620 via IDE1.
 IDE1: IDE Connector
PIN Description PIN Description
1 IDERST 2 GND
3 PDD7 4 PDD8
5 PDD6 6 PDD9
7 PDD5 8 PDD10
9 PDD4 10 PDD11
11 PDD3 12 PDD12
13 PDD2 14 PDD13
15 PDD1 16 PDD14
17 PDD0 18 PDD15
19 GND 20 +5V
21 PDDREQ 22 GND
23 IOW# 24 GND
25 IOR# 26 GND
27 PIORDY 28 PD CSEL-
29 PDDACK# 30 GND
31 INTS 32 N/C
33 PDA1 34 PD33/66
35 PDA0 36 PDA2
37 PDCS1# 38 PDCS3#
39 HDD Active 40 GND
41 VCC 42 VCC
43 GND 44 N/C
1
2
43
44

13
3.9 Serial ATAII Connector
You can connect the Serial ATAII device that provides you high speeds
transfer rates (300MB/sec.). If you wish to use RAID function, please
note that these two serial ATAII ports just support RAID0 and only
compatible with WIN XP.
 SATA0/SATA1: Serial ATA Connector
PIN Description
1 GND
2 SATATXP
3 SATATXN
4 GND
5 SATARXN
6 SATARXP
7 GND
17
3.10 Serial Port Connectors
The HS-2620 offers NS16C550 compatible UARTs with Read/
Receive 16-byte FIFO serial ports and two internal 10-pin headers.
 COM1/COM2: COM 1/COM 2 Connector (20x2 Header)
PIN Description PIN Description
1 DCD 2 RXD
3 TXD 4 DTR
5 GND 6 DSR
7 RTS 8 CTS
9 RI 10 N/C
19
10 2

14
3.11 Ethernet Connector
The HS-2620 provides two external RJ-45 interface connectors.
Please refer to the following for its pin information.
 CN8/CN4: RJ-45 Connector
PIN Description
1 MDI0+
2 MDI0-
3 MDI1+
4 MDI1-
5 MDI2+
6 MDI2-
7 MDI3+
8 MDI3-
1
8
3.12 USB Connector
The HS-2620 provides one 8-pin connector, at location JP10, for two
USB ports, and one external USB2.0 port at CN11.
 CN1: External USB2.0 Connector
PIN Description PIN Description
1 VCC 5 VCC
2 USBD0- 6 USBD1-
3 USBD0+ 7 USBD1+
4 GND 8 GND
 USB1: Internal USB2.0 Connector
PIN Description PIN Description
1 VCC 2 VCC
3 USBD2- 4 USBD3-
5 USBD2+ 6 USBD3+
7 GND 8 GND