Advantech PCE-3028 Installation and operation manual

PCE-3028/PCE-4128 Startup Manual 1
Before you begin installing your card, please make sure that
the following items have been shipped:
1. 1 PCE-3028/PCE-4128 PICMG 1.3 System Host
Board
2. 1 PCE-3028/PCE-4128 P/N: 2006302801
startup manual
3. 1 CD with utility P/N: 2066302801
4. 1 Serial ATA HDD data cables P/N: 1700003194
5. 1 Serial ATA HDD power cables P/N: 1703150102
6. LPT cable P/N: 1700002223
7. COM cable P/N: 1700008762
8. USB 2.0 cable P/N: 1700014398
9. USB 3.0 cable P/N: 1700020277-01
10. Power converter P/N: 1703040100
(Connecting from peripheral
power connector on power
supply to PWR1 on board)
11. PS/2 Y cable P/N: 1700060202
12. 1 warranty card P/N: 2190000902
If any of these items are missing or damaged, please con-
tact your distributor or sales representative immediately.
Note 1: For detailed contents of PCE-3028/PCE-4128,
please refer to information on the enclosed CD-
ROM (in PDF format).
PCE-3028/PCE-4128 LGA1150 Intel®Xeon / CoreTM
i7/i5/i3/ Pentium®/Celeron®PICMG 1.3 Half Sized
System Host Board with DDR3 / Dual GbE LAN
Startup Manual
General
• LGA1150 Intel®Xeon / Core™ i7/i5/i3/Pentium®/Celeron®
- PCE-3028
Haswell Refresh CPU (Support from BIOS V2.XX)
CPU i7-4790S i5-4590S i5-4590T i3-4360 i3-4350T i3-4340TE
Base Frequency (GHz) 3.2 3 2 3.7 3.1 2.6
L3 Cache (MB) 8 6 6 4 4 4
Haswell CPU (Support from BIOS V1.XX)
CPU i7-
4770S
i7-
4770TE
i5-
4570S
i5-
4570TE
i3-
4330
i3-
4330TE G3420 G3320TE G1820 G1820TE
Base
Frequency
(GHz)
3.1 2.3 2.9 2.7 3.5 2.4 3.2 2.3 2.7 2.2
L3 Cache
(MB) 8 8 6 4 3 3 3 3 2 2
- PCE-4128
Haswell Refresh CPU (Support from BIOS V1.XX)
CPU i3-4360 i3-4340TE
Base Frequency (GHz) 3.7 2.6
L3 Cache (MB) 4 4
Haswell CPU (Support from BIOS V1.XX)
CPU E3-
1275v3
E3-
1225v3
E3-
1268Lv3
i5-
4570TE
i3-
4330
i3-
4330TE
G3420 G3320TE G1820 G1820TE
Base
Frequency
(GHz)
3.5 3.2 2.3 2.7 3.5 2.4 3.2 2.3 2.7 2.2
L3 Cache
(MB)
8 8 8 4 3 3 3 3 2 2
• BIOS: AMI 128 Mbit SPI flash
• Chipset:
- PCE-3028: Intel H81
- PCE-4128: Intel C226
• System memory:
- PCE-3028: DDR3 1066/1333/1600 8GB per DIMM, Max
capacity is 16GB (Only Non-ECC support)
- PCE-4128: DDR3 1066/1333/1600 8GB per DIMM, Max
capacity is 16GB (Only ECC support)
• SATA interface:
- PCE-3028: SATA 3.0 x2 (600 MB/sec) , SATA 2.0 x2
(300 MB/sec)
- PCE-4128: SATA 3.0 x4 (600 MB/sec)
• Serial ports: 2 RS-232, supports extra 4 RS-232 or
RS-422/485 with optional COM module: PCA-COM232-
00A1E or PCA-COM485-00A1E
• Parallel port: 1, supports SPP/EPP/ECP mode
• Keyboard/mouse connector: Supports 1 external 6-pin
header
• Watchdog timer: Programmable 1~255 sec
• USB:
- PCE-3028:USB 3.0 x2, USB 2.0 x8
- PCE-4128:USB 3.0 x3, USB 2.0 x7
• GPIO: 1 programmable 8-bit GPIO pin-header
Specications
Packing List
For more information on this and other Advantech
products, please visit our website at:
http://www.advantech.com
http://www.advantech.com/eplatform
For technical support and service, please visit our
support website at:
http://support.advantech.com.tw/support/default.
aspx
This manual is for the PCE-3028/PCE-4128 Series Rev. A1.
Part No. 2006302801
Printed in China
2nd Edition,
June 2014

2 PCE-3028/PCE-4128 Startup Manual
• Operating system:
OS PCE-
3028
PCE-
4128 Remark
WinXP-32bit
(Pro SP3) V V
1. Intel Matrix Storage
RAID/RST/AHCI are not
supported.
2. USB 3.0 is not support,
down grade to USB 2.0.
3. There is an exclama-
tion mark on audio device
under Windows device
manager but audio function
is normal.
4. ACPI (S1, S3, S4) func-
tion is NOT supported.
Win7-32bit
(Ultimate SP1) V V
Win7-64bit
(Ultimate SP1) V V
Win8-32bit (Pro) V V
Win8-64bit (Pro) V V
Linux (Fedora
Core 19, 32bit.
Installation only)
V V
Server 2008 R2
64-bit (Enterprise
SP1)
V
Server 2012 64-bit
(Standard) V
Display
• Chipset:
- PCE-3028: Intel GT2 4600 or GT1 HD graphics (Depend
on CPU support)
- PCE-4128: Intel GT2 P4600, GT2 4600 or GT1 HD
graphics (Depend on CPU support)
Ethernet Interface
• Chipset supports:
- PCE-3028: Intel I217V for LAN1, and I211AT for LAN2
- PCE-4128: Intel I217LM for LAN1, and I210AT for LAN2
• Connection: 2 on-board RJ-45 connector with LED
indicators
Mechanical and Enviromental
• Dimensions: (L x W): 167.64 x 126.39 mm
• Power supply voltage: +3.3 V, +5 V, +12 V, 5VSB
• Power requirements:
PCE-3028
Intel Core i7-4770S (3.1GHz), DDR3 1600 8GB *2
Voltage 12V 5V 3.3V 5VSB -12V -5V
Current (A) 7.26 1.06 0.42 0 0 0
Total (W) 93.806
PCE-4128
Intel Xeon E3-1275 v3 (3.5GHz), DDR3 1600 8GB *2
Voltage 12V 5V 3.3V 5VSB -12V -5V
Current (A) 7.36 0.96 0.83 0.13 0 0
Total (W) 96.509
• Operating temperature: 0 ~ 60° C (depending on CPU)
• Weight: 0.33 kg (weight of board)
Thermal
• CPU Cooler:
Part Number Description
1960047831N001
2U cooler for Xeon E3-1275v3,
E3-1225v3, E3-1268v3, Intel Core
i7-4770S, i7-4770TE, i5-4570S, i5-
4570TE, i3-4330, i3-4330TE, G3420,
G3220TE, G1820, G1820TE
1960053207N001
1.5U cooler for Intel Core i7-4770S, i7-
4770TE, i5-4570S, i5-4570TE, i3-4330,
i3-4330TE, G3420, G3220TE, G1820,
G1820TE
1960053065N001
1U blower for Intel Core i5-4570S,
i5-4570TE, i3-4330, i3-4330TE, G3420,
G3220TE, G1820, G1820TE
Suggested Backplane
• PCE-3028:
P/N PCIex16 PCIex8 PCIex4 PCIex1 PCI
PCE-3B12-08A1E 1 2 8
PCE-3B06-00A1E 1 4
PCE-3B03-00A1E 1 1
PCE-3B06-03A1E 1 1 3
PCE-3B06-02A1E 1 2 2
PCE-3B03A-00A1E 1 1
• PCE-4128:
P/N PCIex16 PCIex8 PCIex4 PCIex1 PCI
PCE-4B13-08A1E 2 2 8
PCE-3B12-08A1E 1 2 8
PCE-3B06-00A1E 1 4
PCE-3B03-00A1E 1 1
PCE-3B06-03A1E 1 1 3
PCE-3B06-02A1E 1 2 2
PCE-3B03A-00A1E 1 1
The board has a number of jumpers that allow you to con-
figure your system to suit your application. The table below
lists the function of each of the jumpers and connectors.
Connectors
Label Function
LPT1 Parallel port, supports SPP/EPP/ECP mode
LAN1 PCE-3028: Intel I217V
PCE-4128: Intel I217LM
LAN2 PCE-3028: Intel I211AT
PCE-4128: Intel I210AT
VGA1 VGA connector
KBMS1 External keyboard/mouse connector
COM12 Box header for RS-232*2
FP1 Power switch / Reset connector
JCASE1 Case open
CPUFAN1 CPU FAN connector (4-pin)
LANLED1 LAN1/2 LED connector
Jumpers and Connectors
Specications (Cont.)

PCE-3028/PCE-4128 Startup Manual 3
HDAUD1 HD audio extension module connector
USB12 USB port 1, 2 (USB 3.0 port)
USB3 PCE-3028: USB port 3 (USB 2.0)
PCE-4128: USB port 3 (USB 3.0)
USB4 Type A connector on board (USB 2.0)
USB56 USB port 5, 6 (USB 2.0)
USB78 USB port 7, 8 (USB 2.0)
USB910 USB port 9, 10 (USB 2.0)
S ATA 1 Serial ATA1 (SATA 3.0)
S ATA 2 Serial ATA2 (SATA 3.0)
S ATA 3 Serial ATA3 (For PCE-3028, it is SATA 2.0
port, for PCE-4128, it is SATA 3.0 port.)
S ATA 4 Serial ATA4 (For PCE-3028, it is SATA 2.0
port, for PCE-4128, it is SATA 3.0 port.)
CPU1 CPU Socket
DIMMA1 Memory connector channel A1
DIMMB1 Memory connector channel B1
GPIO1 GPIO pin header
LPC1 Low pin count module expansion pin-header
PWR1 12 V, 5 V power connector
DVI1
(PCE-3028)
DVI connector
DP1/DP2
(PCE-4128)
Display pin header to stack board (Display
type depends on optional stack board)
MINIPCIE1_
MSATA1
(PCE-4128)
m-SATA(default) and mini-PCIe socket
(Optional)
Jumpers
Label Function
JCMOS1 CMOS clear
JWDT1+JOBS1 Hardware monitor alarm+watchdog
timer output selection
BZ1 Buzzer setting
JME1 Enable ME
JCMOS1: Clear CMOS
Closed Pins Result
1-2 Keep CMOS (Default)
2-3 Clear CMOS
1 2 3
Jumpers and Connectors (Cont.)
JOBS1+JWDT1: Hardware monitor alarm+watchdog
timer output selection
Function Jumper Setting
2-3 Enable watchdog timer (Default)
4-5 Enable Hardware monitor alarm (Default)
BZ1: Buzzer setting
Closed Pins Result
3-4 Enable buzzer
(Default)
Connect 1 & 4 Connecting to external speaker
JME1: Enable ME
Closed Pins Result
1-2 Enable ME
(Default)
2-3 Disable ME
The drivers for the PCE-3028 are located on the software
installation CD. Please click through the folder and follow
the on screen instructions to install them.
Caution! The computer is supplied with a battery-powered
realtime clock circuit. There is a danger of explo-
sion if battery is incorrectly replaced. Replace
only with same or equivalent type recommended
by the manufacturer. Discard used batteries ac-
cording to manufacturer’s instructions.
This device complies with the requirements in Part 15 of
the FCC rules. Operation is subject to the following two
conditons:
1. This device may not cause harmful interference;
2. This device must accept any interference received,
including interference that may cause undesired opera-
tion.
1 2 3 4 5
1 2 3 4
1 2 3
Software Installation
Declaration of Conformity

4 PCE-3028/PCE-4128 Startup Manual
PCE-3028 Board Layout
PCE-4128 Board Layout
Board Layout
PWR1
DIMMB1
DIMMA1 FP1
SATA1
SATA4
SATA2
SATA3
USB56
USB910
USB4
CPUFAN1
USB78
COM12
JWDT1+JOBS1
LANLED1
USB3
LAN2
LAN1
SPI1
VGA1
DVI1
KBMS1
HDAUD1
BZ1JCMOS1
JME1
PCH: H81
JCASE1
CPU:Intel
LGA1150
GPIO1
LPC1
LPT1
USB12
PWR1
DIMMB1
DIMMA1 FP1
SATA1
SATA4
SATA2
SATA3
USB56
USB910
USB4
CPUFAN1
USB78
COM12
JWDT1+JOBS1
LANLED1
USB3
LAN2
LAN1
SPI1
VGA1
DP1
KBMS1
HDAUD1
BZ1JCMOS1
JME1
PCH: C226
JCASE1
CPU:Intel
LGA1150
GPIO1
LPC1
LPT1
USB12
DP2

PCE-3028/PCE-4128 Startup Manual 5
To power on PCE-3028/PCE-4128 with backplanes, please ensure that below connectors and jumper are correctly connected
and chosen.
How to Power on PCE-3028/PCE-4128
Cable: 1703040100
PWR1
PSON1
123
1 2 3
PSON1: ATX/AT Mode Selection
Jumper Setting Function
1-2 AT mode
2-3 (Default) ATX mode