Boss Audio Systems BV7.3FLIP User manual

Thread all the wires through the
round hole in the center of the
mounting plate.
Install the monitor onto the
mounting plate, using the four
screws provided.
Using the four black self-tapping
screws provided, attach the monitor
mounting plate by screwing through
the headliner and into the existing
roof supports orthe wood bracket
you made (see TIP below).
To lower the monitor, press the MonitorRelease button and pull the monitor down.
It will dropfreely to 45º.
To lower the monitor further, continue pulling down and the internal mechanism
will permit further movement and will hold the monitor in the position in which you
leave it.
To turn the monitor on, press and hold the POWER button for two seconds.When
the power is ON, if an input signal is present, the picture will be displayed on the
screen. If no signal ispresent,the monitor will display the message "NO SIGNAL."
If you know a video input signal is present but the monitor displays "NO SIGNAL,"
be sure to try pressing the AV SELECT button to see if your input source is connected
to the other AV input.
To adjust the monitor image, press MENU to access the various adjustment controls
such as BRIGHTNESS and CONTRAST. Use the +/- buttons to adjust each parameter
until you are satisfied with the picture quality.
This monitor features separate ON/OFF buttons for the right and left dome lights,
so that if you need not disturb a sleeping companion if you need overhead illumination.
Thedome lights turn on when you open a door.To turn on or off the dome lights
manually, simply press the round button near the right dome light.
To turn the dome lights on or off manually, simply press the round button on the
side you wish the light to turn on.
To avoid accidental damage, we suggest you always close the monitor assembly
when it is not in use. Todo so, rotate the monitor back to a 0º left-to-right position,
and push it up into the monitorbase until you hear a “click.” Test that it is secured
by gently pulling down on monitor frame.
On a towel or soft cloth, gently place the monitorassembly “face down” ona stable
worksurface.
Using the wires provided, complete the audio, video and power connections in
your vehicle as shown in the diagram below.
VIDEO INPUT 1
VIDEO INPUT 2
POWER
RED
BLACK
FUSE
to +12 VDC Battery
to Chassis Ground
VIDEO SOURCE 1
(DVD player, video game, etc.)
VIDEO SOURCE 2
(DVD player, video game, etc.)
DOME LIGHTS
RED
BLACK
BLUE
WHITE
Car dome lamp (+)
Car dome lamp (-)
to +12 VDC Battery
to Chassis Ground
On a towel or soft cloth, gently place the monitorassembly “face down” ona stable
worksurface.
Using the wires provided, complete the audio, video and power connections in
your vehicle as shown in the diagram below.
DOME LIGHTS
RED
BLACK
BLUE
WHITE
Car dome lamp (+)
Car dome lamp (-)
to +12 VDC Battery
to Chassis Ground
Troubleshooting
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 13
Specifications
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 14
Monitor Controls and Features:
BV7.3FLIP• BV7 IRF • BV8WFLIP • BV8IRF
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 4
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 3
Features What is included?
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 2
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 1
General precautions
Safety precautions
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 9
Remote Control:
BV7.3FLIP
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 6
Monitor Controls and Features: BV8FL
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 5
Remote Control:
BV7IRF • BV8FL • BV8IRF • BV8WFLIP
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 10 BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 11 BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 12
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 8
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 8
CONTENTS
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - Contents
U S E R ’ S M A N U A L
If you experience operation or performance problems with this product, compare your
installation with the electrical wiringdiagram on the previous page. If problems persist,
read the following troubleshooting tips which may help eliminate the problems.
When first unpacking your new flip-
down monitor, please check first that
the package contains all of the items
below. If something is missing, contact
the store where you purchased the
player.
• LCD monitor housing
• Wireless remote control with
batteries
• RCA-RCA video cable
• Power cable
(BV7.3FLIP, BV8FL and BV8WFLIP)
(red/black with inline fuse and 2-pin
connector)
-or-
• Power/AV cable
(BV.3IRF and BV8IRF)
(red/black with inline fuse and 2-pin
connector, plus stereo RCA audio/RCA
video inputs for each of two channels))
• Dome light cable
(blue/red/white/black with 4-pin connector)
• Metal mounting plate
• (4) black 1/2" sheet metalscrews
(for attaching mounting plate to car roof)
• (4) silver 1" machine screws
(for attaching monitor to mounting plate)
•Do not operate this equipment while
driving – safe driving should always
be your highest priority.
• This product should not be installed
in a location which allows the monitor
screen to be visible to the driver of the
vehicle. In some states and countries,
the viewing of images on a screeen
inside a vehicle is illegal, even by
people other than the driver. Be sure
that the installation and operation of
this system is in compliance with local
rules and regulations.
• If you have installed the monitor in a
position where it is visible to the driver,
be sure to install a Safety Cord. Wire
this cord to an accessory wire which
has +12v powerwhen the ignition is
switched on. This will prevent the
operaton of the monitor when the
engine is running.
•Do not open orattempt to repair this
unit yourself. Dangerous high voltages
are present which may result in electric
shock. Refer any repairs toa qualified
service technician.
•Do notattempt to repair a damaged,
broken or faulty power cord. Replace
it with a new one immediately.
• To avoid risk of electronic shock or
damage to the monitor, do not permit
any of this equipment to become damp
or wet from water or drinks. If this does
occur, immediately unplug the power
cordand send the monitor to your
local dealeror service center as soon
as possible.
• if there is smoke or any peculiar odor
present during useor if there is damage
to any of the component enclosures,
immediately unplug the power cord
and send the monitor to your local
dealer or service center as soon as
possible .
If you do not know how to install the
Safety Cord, please consult with a
mobile video installer in your area, and
have this work completed properly
before operating the video system.
Models BV7.3IRF and BV8IRF also
feature:
• Built-in wireless infrared audio
transmitter (for use with infrared
headphones, model HP-10)
1General precautions
1Safety precautions
2Installation precautions
2Operating precautions
3Features
3What is included?
4Monitor Controls and Features:
BV7.3FLIP• BV7IRF • BV8FL • BV8IRF
5Monitor Controls and Features:
BV8WFLIP
6Remote control: BV7.3FLIP
7Remote control:
BV7IRF • BV8FL •BV8IRF • BV8WFLIP
8System wiring
9Monitor installation
10 Releasing and opening the monitor
11 Powering up the monitor
11 Turning on the dome lights
12 Infrared audio transmission
BV7IRF • BV8IRF
12 Remote control battery replacement
13 Troubleshooting
14 Specifications
Congratulations on your purchase
of a Video Monitor.
It has been designed, engineered
and manufactured to bringyou the
highest level of performance and
quality, and will afford you years of
viewing pleasure.
Thankyou for making your
choice for carvideo entertainment!
A/V SYSTEM
Screen size
Screen format
Video Compatability
LCD panel type
Resolution, pixels
Brightness
A/V Inputs
GENERAL
Power requirements
Power consumption
Dimensions(L x W x H)
All specifications subject to change without notice.
MODEL
8"
16:9
NTSC/PAL Auto
Active Matrix TFT
1152 x 234
400 NITS
Video 2EA
12V DC
3W
2.8MHz/2.3MHz
12V DC
9W
9.8"x 9.5" x 1.6"
page
BV7.3FLIP
7.3" Flip Down Widescreen TFT Monitor
BV7.3IRF
7.3" Flip Down Widescreen TFT Monitor
with Built-In Infrared Audio Transmitter
BV8FL
8" Flip Down TFT Monitor
BV8WFLIP
8" Flip Down Widescreen TFT Monitor
BV8IRF
8" Flip Down Widescreen TFT Monitor
with Built-In Infrared Audio Transmitter
SYMPTOM CAUSE REMEDY
1/2" black self tapping
sheet metal screws
1" silver finish
threaded machine
screws
Press the monitor
release button
Pull the monitor screen
down to the desired angle
YELLOW
RED
WHITE
YELLOW
RED
WHITE

Thread all the wires through the
round hole in the center of the
mounting plate.
Install the monitor onto the
mounting plate, using the four
screws provided.
Using the four black self-tapping
screws provided, attach the monitor
mounting plate by screwing through
the headliner and into the existing
roof supports orthe wood bracket
you made (see TIP below).
To lower the monitor, press the MonitorRelease button and pull the monitor down.
It will dropfreely to 45º.
To lower the monitor further, continue pulling down and the internal mechanism
will permit further movement and will hold the monitor in the position in which you
leave it.
To turn the monitor on, press and hold the POWER button for two seconds.When
the power is ON, if an input signal is present, the picture will be displayed on the
screen. If no signal ispresent,the monitor will display the message "NO SIGNAL."
If you know a video input signal is present but the monitor displays "NO SIGNAL,"
be sure to try pressing the AV SELECT button to see if your input source is connected
to the other AV input.
To adjust the monitor image, press MENU to access the various adjustment controls
such as BRIGHTNESS and CONTRAST. Use the +/- buttons to adjust each parameter
until you are satisfied with the picture quality.
This monitor features separate ON/OFF buttons for the right and left dome lights,
so that if you need not disturb a sleeping companion if you need overhead illumination.
Thedome lights turn on when you open a door.To turn on or off the dome lights
manually, simply press the round button near the right dome light.
To turn the dome lights on or off manually, simply press the round button on the
side you wish the light to turn on.
To avoid accidental damage, we suggest you always close the monitor assembly
when it is not in use. Todo so, rotate the monitor back to a 0º left-to-right position,
and push it up into the monitorbase until you hear a “click.” Test that it is secured
by gently pulling down on monitor frame.
On a towel or soft cloth, gently place the monitor assembly “face down” on a stable
worksurface.
Using the wires provided, complete the audio, videoand power connections in
your vehicleas shown in the diagram below.
VIDEO INPUT 1
VIDEO INPUT 2
POWER
RED
BLACK
FUSE
to +12 VDC Battery
to Chassis Ground
VIDEO SOURCE 1
(DVD player, video game, etc.)
VIDEO SOURCE 2
(DVD player, video game, etc.)
DOME LIGHTS
RED
BLACK
BLUE
WHITE
Car dome lamp (+)
Car dome lamp (-)
to +12 VDC Battery
to Chassis Ground
On a towel or soft cloth, gently place the monitorassembly “face down” ona stable
worksurface.
Using the wires provided, complete the audio, video and power connections in
your vehicle as shown in the diagram below.
DOME LIGHTS
RED
BLACK
BLUE
WHITE
Car dome lamp (+)
Car dome lamp (-)
to +12 VDC Battery
to Chassis Ground
Troubleshooting
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 13
Specifications
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 14
Monitor Controls and Features:
BV7.3FLIP• BV7 IRF • BV8WFLIP • BV8IRF
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 4
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 3
Features What is included?
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 2
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 1
General precautions
Safety precautions
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 9
Remote Control:
BV7.3FLIP
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 6
Monitor Controls and Features: BV8FL
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 5
Remote Control:
BV7IRF • BV8FL • BV8IRF • BV8WFLIP
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 10 BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 11 BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 12
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 8
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 8
CONTENTS
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - Contents
U S E R ’ S M A N U A L
If you experience operation or performance problems with this product, compare your
installation with the electrical wiringdiagram on the previous page. If problems persist,
read the following troubleshooting tips which may help eliminate the problems.
When first unpacking your new flip-
down monitor, please check first that
the package contains all of the items
below. If something is missing, contact
the store where you purchased the
player.
• LCD monitor housing
• Wireless remote control with
batteries
• RCA-RCA video cable
• Power cable
(BV7.3FLIP, BV8FL and BV8WFLIP)
(red/black with inline fuse and 2-pin
connector)
-or-
• Power/AV cable
(BV.3IRF and BV8IRF)
(red/black with inline fuse and 2-pin
connector, plus stereo RCA audio/RCA
video inputs for each of two channels))
• Dome light cable
(blue/red/white/black with 4-pin connector)
• Metal mounting plate
• (4) black 1/2" sheet metalscrews
(for attaching mounting plate to car roof)
• (4) silver 1" machine screws
(for attaching monitor to mounting plate)
•Do not operate this equipment while
driving – safe driving should always
be your highest priority.
• This product should not be installed
in a location which allows the monitor
screen to be visible to the driver of the
vehicle. In some states and countries,
the viewing of images on a screeen
inside a vehicle is illegal, even by
people other than the driver. Be sure
that the installation and operation of
this system is in compliance with local
rules and regulations.
• If you have installed the monitor in a
position where it is visible to the driver,
be sure to install a Safety Cord. Wire
this cord to an accessory wire which
has +12v powerwhen the ignition is
switched on. This will prevent the
operaton of the monitor when the
engine is running.
•Do not open orattempt to repair this
unit yourself. Dangerous high voltages
are present which may result in electric
shock. Refer any repairs toa qualified
service technician.
•Do notattempt to repair a damaged,
broken or faulty power cord. Replace
it with a new one immediately.
• To avoid risk of electronic shock or
damage to the monitor, do not permit
any of this equipment to become damp
or wet from water or drinks. If this does
occur, immediately unplug the power
cordand send the monitor to your
local dealeror service center as soon
as possible.
• if there is smoke or any peculiar odor
present during useor if there is damage
to any of the component enclosures,
immediately unplug the power cord
and send the monitor to your local
dealer or service center as soon as
possible .
If you do not know how to install the
Safety Cord, please consult with a
mobile video installer in your area, and
have this work completed properly
before operating the video system.
Models BV7.3IRF and BV8IRF also
feature:
• Built-in wireless infrared audio
transmitter (for use with infrared
headphones, model HP-10)
1General precautions
1Safety precautions
2Installation precautions
2Operating precautions
3Features
3What is included?
4MonitorControls and Features:
BV7.3FLIP •BV7IRF • BV8FL • BV8IRF
5MonitorControls and Features:
BV8WFLIP
6Remote control: BV7.3FLIP
7Remote control:
BV7IRF • BV8FL • BV8IRF • BV8WFLIP
8Systemwiring
9Monitor installation
10 Releasing and opening the monitor
11 Powering up the monitor
11 Turning on thedome lights
12 Infrared audio transmission
BV7IRF • BV8IRF
12 Remote control battery replacement
13 Troubleshooting
14 Specifications
Congratulations on your purchase
of a Video Monitor.
It has been designed, engineered
and manufactured to bring you the
highest level of performance and
quality, and will afford you years of
viewing pleasure.
Thank you for making your
choice for car video entertainment!
A/V SYSTEM
Screen size
Screen format
Video Compatability
LCD panel type
Resolution, pixels
Brightness
A/V Inputs
GENERAL
Power requirements
Power consumption
Dimensions(L x W x H)
All specifications subject to change without notice.
MODEL
8"
16:9
NTSC/PAL Auto
Active Matrix TFT
1152 x 234
400 NITS
Video 2EA
12V DC
3W
2.8MHz/2.3MHz
12V DC
9W
9.8"x 9.5" x 1.6"
page
BV7.3FLIP
7.3" Flip Down Widescreen TFT Monitor
BV7.3IRF
7.3" Flip Down Widescreen TFT Monitor
with Built-In Infrared Audio Transmitter
BV8FL
8" Flip Down TFT Monitor
BV8WFLIP
8" Flip Down Widescreen TFT Monitor
BV8IRF
8" Flip Down Widescreen TFT Monitor
with Built-In Infrared Audio Transmitter
SYMPTOM CAUSE REMEDY
1/2" black self tapping
sheet metal screws
1" silver finish
threaded machine
screws
Press the monitor
release button
Pull the monitor screen
down to the desired angle
YELLOW
RED
WHITE
YELLOW
RED
WHITE

Thread all the wires through the
round hole in the center of the
mounting plate.
Install the monitor onto the
mounting plate, using the four
screws provided.
Using the four black self-tapping
screws provided, attach the monitor
mounting plate by screwing through
the headliner and into the existing
roof supports orthe wood bracket
you made (see TIP below).
To lower the monitor, press the MonitorRelease button and pull the monitor down.
It will dropfreely to 45º.
To lower the monitor further, continue pulling down and the internal mechanism
will permit further movement and will hold the monitor in the position in which you
leave it.
To turn the monitor on, press and hold the POWER button for two seconds.When
the power is ON, if an input signal is present, the picture will be displayed on the
screen. If no signal ispresent,the monitor will display the message "NO SIGNAL."
If you know a video input signal is present but the monitor displays "NO SIGNAL,"
be sure to try pressing the AV SELECT button to see if your input source is connected
to the other AV input.
To adjust the monitor image, press MENU to access the various adjustment controls
such as BRIGHTNESS and CONTRAST. Use the +/- buttons to adjust each parameter
until you are satisfied with the picture quality.
This monitor features separate ON/OFF buttons for the right and left dome lights,
so that if you need not disturb a sleeping companion if you need overhead illumination.
Thedome lights turn on when you open a door.To turn on or off the dome lights
manually, simply press the round button near the right dome light.
To turn the dome lights on or off manually, simply press the round button on the
side you wish the light to turn on.
To avoid accidental damage, we suggest you always close the monitor assembly
when it is not in use. Todo so, rotate the monitor back to a 0º left-to-right position,
and push it up into the monitorbase until you hear a “click.” Test that it is secured
by gently pulling down on monitor frame.
On a towel or soft cloth, gently place the monitor assembly “face down” on a stable
worksurface.
Using the wires provided, complete the audio, videoand power connections in
your vehicleas shown in the diagram below.
VIDEO INPUT 1
VIDEO INPUT 2
POWER
RED
BLACK
FUSE
to +12 VDC Battery
to Chassis Ground
VIDEO SOURCE 1
(DVD player, video game, etc.)
VIDEO SOURCE 2
(DVD player, video game, etc.)
DOME LIGHTS
RED
BLACK
BLUE
WHITE
Car dome lamp (+)
Car dome lamp (-)
to +12 VDC Battery
to Chassis Ground
On a towel or soft cloth, gently place the monitor assembly “face down” on a stable
worksurface.
Using the wires provided, complete the audio, videoand power connections in
your vehicleas shown in the diagram below.
DOME LIGHTS
RED
BLACK
BLUE
WHITE
Car dome lamp (+)
Car dome lamp (-)
to +12 VDC Battery
to Chassis Ground
Troubleshooting
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 13
Specifications
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 14
Monitor Controls and Features:
BV7.3FLIP• BV7 IRF • BV8WFLIP • BV8IRF
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 4
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 3
Features What is included?
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 2
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 1
General precautions
Safety precautions
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 9
Remote Control:
BV7.3FLIP
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 6
Monitor Controls and Features: BV8FL
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 5
Remote Control:
BV7IRF • BV8FL • BV8IRF • BV8WFLIP
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 10 BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 11 BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 12
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 8
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 8
CONTENTS
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - Contents
U S E R ’ S M A N U A L
If you experience operation or performance problems with this product, compare your
installation with the electrical wiringdiagram on the previous page. If problems persist,
read the following troubleshooting tips which may help eliminate the problems.
When first unpacking your new flip-
down monitor, please check first that
the package contains all of the items
below. If something is missing, contact
the store where you purchased the
player.
• LCD monitor housing
• Wireless remote control with
batteries
• RCA-RCA video cable
• Power cable
(BV7.3FLIP, BV8FL and BV8WFLIP)
(red/black with inline fuse and 2-pin
connector)
-or-
• Power/AV cable
(BV.3IRF and BV8IRF)
(red/black with inline fuse and 2-pin
connector, plus stereo RCA audio/RCA
video inputs for each of two channels))
• Dome light cable
(blue/red/white/black with 4-pin connector)
• Metal mounting plate
• (4) black 1/2" sheet metalscrews
(for attaching mounting plate to car roof)
• (4) silver 1" machine screws
(for attaching monitor to mounting plate)
Please read this manual completely
and carefully prior to attempting to
install your new mobile video
equipment. Installed correctly, your
equipment will provide you with
years of enjoyable and safe usage.
Installation of this equipment in any
portion of a vehicle which impairs or
distracts the driver is improper and
dangerous. assumes no liability
whatsoever for failure to follow the
proper installation of this product.
Please keep this manual in a safe place
for future reference.
•Do not operate this equipment while
driving – safe driving should always
be your highest priority.
• This product should not be installed
in a location which allows the monitor
screen to be visible to the driver of the
vehicle. In some states and countries,
the viewing of images on a screeen
inside a vehicle is illegal, even by
people other than the driver. Be sure
that the installation and operation of
this system is in compliance with local
rules and regulations.
• If you have installed the monitor in a
position where it is visible to the driver,
be sure to install a Safety Cord. Wire
this cord to an accessory wire which
has +12v powerwhen the ignition is
switched on. This will prevent the
operaton of the monitor when the
engine is running.
SHOCK HAZARD! Do not open the case
of thisproduct.There are dangerous
voltages present within the unit. Thereare
no user-serviceable parts within the unit.
•Do not open orattempt to repair this
unit yourself. Dangerous high voltages
are present which may result in electric
shock. Refer any repairs toa qualified
service technician.
•Do notattempt to repair a damaged,
broken or faulty power cord. Replace
it with a new one immediately.
• To avoid risk of electronic shock or
damage to the monitor, do not permit
any of this equipment to become damp
or wet from water or drinks. If this does
occur, immediately unplug the power
cordand send the monitor to your
local dealeror service center as soon
as possible.
• if there is smoke or any peculiar odor
present during useor if there is damage
to any of the component enclosures,
immediately unplug the power cord
and send the monitor to your local
dealer or service center as soon as
possible .
If you do not know how to install the
Safety Cord, please consult with a
mobile video installer in your area, and
have this work completed properly
before operating the video system.
Models BV7.3IRF and BV8IRF also
feature:
• Built-in wireless infrared audio
transmitter (for use with infrared
headphones, model HP-10)
1General precautions
1Safety precautions
2Installation precautions
2Operating precautions
3Features
3What is included?
4MonitorControls and Features:
BV7.3FLIP •BV7IRF • BV8FL • BV8IRF
5MonitorControls and Features:
BV8WFLIP
6Remote control: BV7.3FLIP
7Remote control:
BV7IRF • BV8FL • BV8IRF • BV8WFLIP
8Systemwiring
9Monitor installation
10 Releasing and opening the monitor
11 Powering up the monitor
11 Turning on thedome lights
12 Infrared audio transmission
BV7IRF • BV8IRF
12 Remote control battery replacement
13 Troubleshooting
14 Specifications
Congratulations on your purchase
of a Video Monitor.
It has been designed, engineered
and manufactured to bring you the
highest level of performance and
quality, and will afford you years of
viewing pleasure.
Thank you for making your
choice for car video entertainment!
A/V SYSTEM
Screen size
Screen format
Video Compatability
LCD panel type
Resolution, pixels
Brightness
A/V Inputs
GENERAL
Power requirements
Power consumption
Dimensions(L x W x H)
All specifications subject to change without notice.
MODEL
8"
16:9
NTSC/PAL Auto
Active Matrix TFT
1152 x 234
400 NITS
Video 2EA
12V DC
3W
2.8MHz/2.3MHz
12V DC
9W
9.8"x 9.5" x 1.6"
page
BV7.3FLIP
7.3" Flip Down Widescreen TFT Monitor
BV7.3IRF
7.3" Flip Down Widescreen TFT Monitor
with Built-In Infrared Audio Transmitter
BV8FL
8" Flip Down TFT Monitor
BV8WFLIP
8" Flip Down Widescreen TFT Monitor
BV8IRF
8" Flip Down Widescreen TFT Monitor
with Built-In Infrared Audio Transmitter
SYMPTOM CAUSE REMEDY
1/2" black self tapping
sheet metal screws
1" silver finish
threaded machine
screws
Press the monitor
release button
Pull the monitor screen
down to the desired angle
YELLOW
RED
WHITE
YELLOW
RED
WHITE

Thread all the wires through the
round hole in the center of the
mounting plate.
Install the monitor onto the
mounting plate, using the four
screws provided.
Using the four black self-tapping
screws provided, attach the monitor
mounting plate by screwing through
the headliner and into the existing
roof supports or the wood bracket
you made (see TIP below).
To lower the monitor, press the MonitorRelease button and pull the monitor down.
It will dropfreely to 45º.
To lower the monitor further, continue pulling down and the internal mechanism
will permit further movement and will hold the monitor in the position in which you
leave it.
To turn the monitor on, press and hold the POWER button for two seconds.When
the power is ON, if an input signal is present, the picture will be displayed on the
screen. If no signal ispresent,the monitor will display the message "NO SIGNAL."
If you know a video input signal is present but the monitor displays "NO SIGNAL,"
be sure to try pressing the AV SELECT button to see if your input source is connected
to the other AV input.
To adjust the monitor image, press MENU to access the various adjustment controls
such as BRIGHTNESS and CONTRAST. Use the +/- buttons to adjust each parameter
until you are satisfied with the picture quality.
This monitor features separate ON/OFF buttons for the right and left dome lights,
so that if you need not disturb a sleeping companion if you need overhead illumination.
Thedome lights turn on when you open a door.To turn on or off the dome lights
manually, simply press the round button near the right dome light.
To turn the dome lights on or off manually, simply press the round button on the
side you wish the light to turn on.
To avoid accidental damage, we suggest you always close the monitor assembly
when it is not in use. Todo so, rotate the monitor back to a 0º left-to-right position,
and push it up into the monitorbase until you hear a “click.” Test that it is secured
by gently pulling down on monitor frame.
On a towel or soft cloth, gently place the monitor assembly “face down” on a stable
worksurface.
Using the wires provided, complete the audio, videoand power connections in
your vehicleas shown in the diagram below.
VIDEO INPUT 1
VIDEO INPUT 2
POWER
RED
BLACK
FUSE
to +12 VDC Battery
to Chassis Ground
VIDEO SOURCE 1
(DVD player, video game, etc.)
VIDEO SOURCE 2
(DVD player, video game, etc.)
DOME LIGHTS
RED
BLACK
BLUE
WHITE
Car dome lamp (+)
Car dome lamp (-)
to +12 VDC Battery
to Chassis Ground
On a towel or soft cloth, gently place the monitor assembly “face down” on a stable
worksurface.
Using the wires provided, complete the audio, videoand power connections in
your vehicleas shown in the diagram below.
DOME LIGHTS
RED
BLACK
BLUE
WHITE
Car dome lamp (+)
Car dome lamp (-)
to +12 VDC Battery
to Chassis Ground
Troubleshooting
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 13
Specifications
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 14
Monitor Controls and Features:
BV7.3FLIP• BV7 IRF • BV8WFLIP • BV8IRF
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 4
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 3
Features What is included?
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 2
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 1
General precautions
Safety precautions
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 9
Remote Control:
BV7.3FLIP
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 6
Monitor Controls and Features: BV8FL
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 5
Remote Control:
BV7IRF • BV8FL • BV8IRF • BV8WFLIP
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 10 BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 11 BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 12
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 8
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 8
CONTENTS
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - Contents
U S E R ’ S M A N U A L
If you experience operation or performance problems with this product, compare your
installation with the electrical wiringdiagram on the previous page. If problems persist,
read the following troubleshooting tips which may help eliminate the problems.
When first unpacking your new flip-
down monitor, please check first that
the package contains all of the items
below. If something is missing, contact
the store where you purchased the
player.
• LCD monitor housing
• Wireless remote control with
batteries
• RCA-RCA video cable
• Power cable
(BV7.3FLIP, BV8FL and BV8WFLIP)
(red/black with inline fuse and 2-pin
connector)
-or-
• Power/AV cable
(BV.3IRF and BV8IRF)
(red/black with inline fuse and 2-pin
connector, plus stereo RCA audio/RCA
video inputs for each of two channels))
• Dome light cable
(blue/red/white/black with 4-pin connector)
• Metal mounting plate
• (4) black 1/2" sheet metalscrews
(for attaching mounting plate to car roof)
• (4) silver 1" machine screws
(for attaching monitor to mounting plate)
• Do not operate this equipment while
driving – safe driving should always
be your highest priority.
• This product should not be installed
in a location which allows the monitor
screen to be visible to the driver of the
vehicle. In some states and countries,
the viewing of images on a screeen
inside a vehicle is illegal, even by
people other than the driver. Be sure
that the installation and operation of
this system is in compliance with local
rules and regulations.
• If you have installed the monitor in a
position where it is visible to the driver,
be sure to installa Safety Cord. Wire
this cord to an accessory wirewhich
has +12v power when the ignition is
switched on. This will prevent the
operaton of the monitor when the
engine is running.
Operating precautions
Turn the unit off when it is not in use.
Avoid dropping any metal objects or
inflammable items into the monitor
ventilation slots.
Do not place objects on or suspend
objects from the power cord, as this
may damage the cord.
Installation precautions
Choose a mounting location in your
vehicle where the unit will not distract
or otherwise interfere with the driver’s
ability to control the vehicle.
Do not install components in areas
which are susceptible to rain, moisture,
direct sunlight,extreme heat or cold,
excessive dust, dirt or humidity.
If installation requires drilling holes or
othermodifications to the vehicle,
consult with your nearest dealer or
professional car audio installer.
Use only the installation parts and
hardware provided with the unit to
ensure proper installation. Usingother
parts can cause malfunction and
possible damageto your video
monitor.
Use only a power source with 12Volts
DC (negative ground).
Before final installation, temporarily
connect the wiring according to the
diagram near the end of this manual,
check it to ensure that it has been
connected properly, and test the unit
to make sure it is working correctly.
Afterthe monitor is installed, do not
arbitrarily pull it down or strike it. This
may loosen the mounting screws and
cause it to fall down.
• Do not open or attempt to repair this
unit yourself. Dangerous high voltages
are present which may result in electric
shock. Refer any repairs to a qualified
service technician.
• Do not attempt to repair a damaged,
broken or faulty powercord. Replace
it with a new one immediately.
• To avoid risk of electronic shock or
damage to the monitor, donot permit
any of this equipment to become damp
or wet from water or drinks. If this does
occur, immediately unplug the power
cord and send the monitor to your
local dealer or service center as soon
as possible.
• if there is smoke or any peculiar odor
present during useor if there is damage
to any of the componentenclosures,
immediately unplug the power cord
and send the monitor to your local
dealer or service center as soon as
possible .
If you do not know how to install the
Safety Cord, please consult with a
mobile video installer in your area, and
have this work completed properly
before operating the video system.
Models BV7.3IRF and BV8IRF also
feature:
• Built-in wireless infrared audio
transmitter (for use with infrared
headphones, model HP-10)
1General precautions
1Safety precautions
2Installation precautions
2Operating precautions
3Features
3What is included?
4MonitorControls and Features:
BV7.3FLIP •BV7IRF • BV8FL • BV8IRF
5MonitorControls and Features:
BV8WFLIP
6Remote control: BV7.3FLIP
7Remote control:
BV7IRF • BV8FL • BV8IRF • BV8WFLIP
8Systemwiring
9Monitor installation
10 Releasing and opening the monitor
11 Powering up the monitor
11 Turning on thedome lights
12 Infrared audio transmission
BV7IRF • BV8IRF
12 Remote control battery replacement
13 Troubleshooting
14 Specifications
Congratulations on your purchase
of a Video Monitor.
It has been designed, engineered
and manufactured to bring you the
highest level of performance and
quality, and will afford you years of
viewing pleasure.
Thank you for making your
choice for car video entertainment!
A/V SYSTEM
Screen size
Screen format
Video Compatability
LCD panel type
Resolution, pixels
Brightness
A/V Inputs
GENERAL
Power requirements
Power consumption
Dimensions(L x W x H)
All specifications subject to change without notice.
MODEL
8"
16:9
NTSC/PAL Auto
Active Matrix TFT
1152 x 234
400 NITS
Video 2EA
12V DC
3W
2.8MHz/2.3MHz
12V DC
9W
9.8"x 9.5" x 1.6"
page
BV7.3FLIP
7.3" Flip Down Widescreen TFT Monitor
BV7.3IRF
7.3" Flip Down Widescreen TFT Monitor
with Built-In Infrared Audio Transmitter
BV8FL
8" Flip Down TFT Monitor
BV8WFLIP
8" Flip Down Widescreen TFT Monitor
BV8IRF
8" Flip Down Widescreen TFT Monitor
with Built-In Infrared Audio Transmitter
SYMPTOM CAUSE REMEDY
1/2" black self tapping
sheet metal screws
1" silver finish
threaded machine
screws
Press the monitor
release button
Pull the monitor screen
down to the desired angle
YELLOW
RED
WHITE
YELLOW
RED
WHITE

Thread all the wires through the
round hole in the center of the
mounting plate.
Install the monitor onto the
mounting plate, using the four
screws provided.
Using the four black self-tapping
screws provided, attach the monitor
mounting plate by screwing through
the headliner and into the existing
roof supports or the wood bracket
you made (see TIP below).
To lower the monitor, press the MonitorRelease button and pull the monitor down.
It will drop freely to 45º.
To lower the monitor further, continue pulling down and the internal mechanism
will permit further movement and will hold the monitor in the position in which you
leave it.
To turn the monitor on, press and hold the POWER button for two seconds.When
the power is ON, if an input signal is present, the picture will be displayed on the
screen. If no signal ispresent,the monitor will display the message "NO SIGNAL."
If you know a video input signal is present but the monitor displays "NO SIGNAL,"
be sure to try pressing the AV SELECT button to see if your input source is connected
to the other AV input.
To adjust the monitor image, press MENU to access the various adjustment controls
such as BRIGHTNESS and CONTRAST. Use the +/- buttons to adjust each parameter
until you are satisfied with the picture quality.
This monitor features separate ON/OFF buttons for the right and left dome lights,
so that if you need not disturb a sleeping companion if you need overhead illumination.
Thedome lights turn on when you open a door.To turn on or off the dome lights
manually, simply press the round button near the right dome light.
To turn the dome lights on or off manually, simply press the round button on the
side you wish the light to turn on.
To avoid accidental damage, we suggest you always close the monitor assembly
when it is not in use. Todo so, rotate the monitor back to a 0º left-to-right position,
and push it up into the monitorbase until you hear a “click.” Test that it is secured
by gently pulling down on monitor frame.
On a towel or soft cloth, gently place the monitor assembly “face down” on a stable
worksurface.
Using the wires provided, complete the audio, videoand power connections in
your vehicleas shown in the diagram below.
VIDEO INPUT 1
VIDEO INPUT 2
POWER
RED
BLACK
FUSE
to +12 VDC Battery
to Chassis Ground
VIDEO SOURCE 1
(DVD player, video game, etc.)
VIDEO SOURCE 2
(DVD player, video game, etc.)
DOME LIGHTS
RED
BLACK
BLUE
WHITE
Car dome lamp (+)
Car dome lamp (-)
to +12 VDC Battery
to Chassis Ground
On a towel or soft cloth, gently place the monitor assembly “face down” on a stable
worksurface.
Using the wires provided, complete the audio, videoand power connections in
your vehicleas shown in the diagram below.
DOME LIGHTS
RED
BLACK
BLUE
WHITE
Car dome lamp (+)
Car dome lamp (-)
to +12 VDC Battery
to Chassis Ground
Troubleshooting
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 13
Specifications
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 14
Monitor Controls and Features:
BV7.3FLIP• BV7 IRF • BV8WFLIP • BV8IRF
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 4
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 3
Features What is included?
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 2
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 1
General precautions
Safety precautions
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 9
Remote Control:
BV7.3FLIP
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 6
Monitor Controls and Features: BV8FL
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 5
Remote Control:
BV7IRF • BV8FL • BV8IRF • BV8WFLIP
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 10 BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 11 BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 12
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 8
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 8
CONTENTS
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - Contents
U S E R ’ S M A N U A L
If you experience operation or performance problems with this product, compare your
installation with the electrical wiringdiagram on the previous page. If problems persist,
read the following troubleshooting tips which may help eliminate the problems.
Your new video monitor features the
following:
• TFT Active Matrix LCD display
• Swivel bracket permitting 30º
rotation in left/right direction
• Overhead console mounting
bracket
• On-screen menu system
• Audio/video input controls
• Built-in dome lights
• Wireless remote control
When first unpacking your new flip-
down monitor, please check first that
the package contains all of the items
below. If something is missing, contact
the store where you purchased the
player.
• LCD monitor housing
• Wireless remote control with
batteries
• RCA-RCA video cable
• Power cable
(BV7.3FLIP, BV8FL and BV8WFLIP)
(red/black with inline fuse and 2-pin
connector)
-or-
• Power/AV cable
(BV.3IRF and BV8IRF)
(red/black with inline fuse and 2-pin
connector, plus stereo RCA audio/RCA
video inputs for each of two channels))
• Dome light cable
(blue/red/white/black with 4-pin connector)
• Metal mounting plate
• (4) black 1/2" sheet metalscrews
(for attaching mounting plate to car roof)
• (4) silver 1" machine screws
(for attaching monitor to mounting plate)
• Do not operate this equipment while
driving – safe driving should always
be your highest priority.
• This product should not be installed
in a location which allows the monitor
screen to be visible to the driver of the
vehicle. In some states and countries,
the viewing of images on a screeen
inside a vehicle is illegal, even by
people other than the driver. Be sure
that the installation and operation of
this system is in compliance with local
rules and regulations.
• If you have installed the monitor in a
position where it is visible to the driver,
be sure to installa Safety Cord. Wire
this cord to an accessory wirewhich
has +12v power when the ignition is
switched on. This will prevent the
operaton of the monitor when the
engine is running.
• Do not open or attempt to repair this
unit yourself. Dangerous high voltages
are present which may result in electric
shock. Refer any repairs to a qualified
service technician.
• Do not attempt to repair a damaged,
broken or faulty powercord. Replace
it with a new one immediately.
• To avoid risk of electronic shock or
damage to the monitor, donot permit
any of this equipment to become damp
or wet from water or drinks. If this does
occur, immediately unplug the power
cord and send the monitor to your
local dealer or service center as soon
as possible.
• if there is smoke or any peculiar odor
present during useor if there is damage
to any of the componentenclosures,
immediately unplug the power cord
and send the monitor to your local
dealer or service center as soon as
possible .
If you do not know how to install the
Safety Cord, please consult with a
mobile video installer in your area, and
have this work completed properly
before operating the video system.
Models BV7.3IRF and BV8IRF also
feature:
• Built-in wireless infrared audio
transmitter (for use with infrared
headphones, model HP-10)
1General precautions
1Safety precautions
2Installation precautions
2Operating precautions
3Features
3What is included?
4MonitorControls and Features:
BV7.3FLIP •BV7IRF • BV8FL • BV8IRF
5MonitorControls and Features:
BV8WFLIP
6Remote control: BV7.3FLIP
7Remote control:
BV7IRF • BV8FL • BV8IRF • BV8WFLIP
8Systemwiring
9Monitor installation
10 Releasing and opening the monitor
11 Powering up the monitor
11 Turning on thedome lights
12 Infrared audio transmission
BV7IRF • BV8IRF
12 Remote control battery replacement
13 Troubleshooting
14 Specifications
Congratulations on your purchase
of a Video Monitor.
It has been designed, engineered
and manufactured to bring you the
highest level of performance and
quality, and will afford you years of
viewing pleasure.
Thank you for making your
choice for car video entertainment!
A/V SYSTEM
Screen size
Screen format
Video Compatability
LCD panel type
Resolution, pixels
Brightness
A/V Inputs
GENERAL
Power requirements
Power consumption
Dimensions(L x W x H)
All specifications subject to change without notice.
MODEL
8"
16:9
NTSC/PAL Auto
Active Matrix TFT
1152 x 234
400 NITS
Video 2EA
12V DC
3W
2.8MHz/2.3MHz
12V DC
9W
9.8"x 9.5" x 1.6"
page
BV7.3FLIP
7.3" Flip Down Widescreen TFT Monitor
BV7.3IRF
7.3" Flip Down Widescreen TFT Monitor
with Built-In Infrared Audio Transmitter
BV8FL
8" Flip Down TFT Monitor
BV8WFLIP
8" Flip Down Widescreen TFT Monitor
BV8IRF
8" Flip Down Widescreen TFT Monitor
with Built-In Infrared Audio Transmitter
SYMPTOM CAUSE REMEDY
1/2" black self tapping
sheet metal screws
1" silver finish
threaded machine
screws
Press the monitor
release button
Pull the monitor screen
down to the desired angle
YELLOW
RED
WHITE
YELLOW
RED
WHITE

Thread all the wires through the
round hole in the center of the
mounting plate.
Install the monitor onto the
mounting plate, using the four
screws provided.
Using the four black self-tapping
screws provided, attach the monitor
mounting plate by screwing through
the headliner and into the existing
roof supports or the wood bracket
you made (see TIP below).
To lower the monitor, press the Monitor Release button and pull the monitor down.
It will drop freely to 45º.
To lower the monitor further, continue pulling down and the internal mechanism
will permit further movement and will hold the monitor in the position in which you
leave it.
To turn the monitor on, press and hold the POWER button for two seconds. When
the power is ON, if an input signal is present, the picture will bedisplayed on the
screen. If no signal is present, the monitor will display the message "NO SIGNAL."
If you know a video input signal is present but the monitor displays "NO SIGNAL,"
be sure to try pressing the AV SELECT button to see if your input source is connected
to the other AV input.
To adjust the monitor image, press MENU to access the various adjustment controls
such as BRIGHTNESS and CONTRAST. Use the +/- buttons to adjust each parameter
until you are satisfied with the picture quality.
This monitor features separate ON/OFF buttons for the right and left dome lights,
so that if you need not disturb a sleeping companion if you need overhead illumination.
The dome lights turn on when you open a door. To turn on or off the dome lights
manually, simply press the round button near the right dome light.
To turn the dome lights on or off manually, simply press the round button on the
side you wish the light to turn on.
To avoid accidental damage, we suggest you always close the monitor assembly
when it is not in use. To do so, rotate the monitor back to a 0º left-to-right position,
and push it up into the monitor base until you hear a “click.” Test that it is secured
by gently pulling down on monitor frame.
On a towel or soft cloth, gently place the monitor assembly “face down” on a stable
worksurface.
Using the wires provided, complete the audio, videoand power connections in
your vehicleas shown in the diagram below.
VIDEO INPUT 1
VIDEO INPUT 2
POWER
RED
BLACK
FUSE
to +12 VDC Battery
to Chassis Ground
VIDEO SOURCE 1
(DVD player, video game, etc.)
VIDEO SOURCE 2
(DVD player, video game, etc.)
DOME LIGHTS
RED
BLACK
BLUE
WHITE
Car dome lamp (+)
Car dome lamp (-)
to +12 VDC Battery
to Chassis Ground
On a towel or soft cloth, gently place the monitor assembly “face down” on a stable
worksurface.
Using the wires provided, complete the audio, videoand power connections in
your vehicleas shown in the diagram below.
DOME LIGHTS
RED
BLACK
BLUE
WHITE
Car dome lamp (+)
Car dome lamp (-)
to +12 VDC Battery
to Chassis Ground
Troubleshooting
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 13
Specifications
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 14
Monitor Controls and Features:
BV7.3FLIP• BV7 IRF • BV8WFLIP • BV8IRF
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 4
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 3
Features What is included?
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 2
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 1
General precautions
Safety precautions
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 9
Remote Control:
BV7.3FLIP
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 6
Monitor Controls and Features: BV8FL
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 5
Remote Control:
BV7IRF • BV8FL • BV8IRF • BV8WFLIP
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 10 BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 11 BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 12
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 8
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 8
CONTENTS
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - Contents
U S E R ’ S M A N U A L
If you experience operation or performance problems with this product, compare your
installation with the electrical wiringdiagram on the previous page. If problems persist,
read the following troubleshooting tips which may help eliminate the problems.
When first unpacking your new flip-
down monitor, please check first that
the package contains all of the items
below. If something is missing, contact
the store where you purchased the
player.
• LCDmonitor housing
• Wireless remote control with
batteries
• RCA-RCA video cable
• Power cable
(BV7.3FLIP, BV8FL and BV8WFLIP)
(red/black with inline fuse and 2-pin
connector)
-or-
• Power/AV cable
(BV.3IRF and BV8IRF)
(red/black with inline fuse and 2-pin
connector, plus stereo RCA audio/RCA
video inputs for each of two channels))
• Dome light cable
(blue/red/white/black with 4-pin connector)
• Metal mounting plate
• (4) black 1/2" sheet metal screws
(for attaching mounting plate to car roof)
• (4) silver 1" machine screws
(for attaching monitor to mounting plate)
• Do not operate this equipment while
driving – safe driving should always
be your highest priority.
• This product should not be installed
in a location which allows the monitor
screen to be visible to the driver of the
vehicle. In some states and countries,
the viewing of images on a screeen
inside a vehicle is illegal, even by
people other than the driver. Be sure
that the installation and operation of
this system is in compliance with local
rules and regulations.
• If you have installed the monitor in a
position where it is visible to the driver,
be sure to installa Safety Cord. Wire
this cord to an accessory wirewhich
has +12v power when the ignition is
switched on. This will prevent the
operaton of the monitor when the
engine is running.
• Do not open or attempt to repair this
unit yourself. Dangerous high voltages
are present which may result in electric
shock. Refer any repairs to a qualified
service technician.
• Do not attempt to repair a damaged,
broken or faulty powercord. Replace
it with a new one immediately.
• To avoid risk of electronic shock or
damage to the monitor, donot permit
any of this equipment to become damp
or wet from water or drinks. If this does
occur, immediately unplug the power
cord and send the monitor to your
local dealer or service center as soon
as possible.
• if there is smoke or any peculiar odor
present during useor if there is damage
to any of the componentenclosures,
immediately unplug the power cord
and send the monitor to your local
dealer or service center as soon as
possible .
If you do not know how to install the
Safety Cord, please consult with a
mobile video installer in your area, and
have this work completed properly
before operating the video system.
Models BV7.3IRF and BV8IRF also
feature:
• Built-in wireless infrared audio
transmitter (for use with infrared
headphones, model HP-10)
1General precautions
1Safety precautions
2Installation precautions
2Operating precautions
3Features
3What is included?
4MonitorControls and Features:
BV7.3FLIP •BV7IRF • BV8FL • BV8IRF
5MonitorControls and Features:
BV8WFLIP
6Remote control: BV7.3FLIP
7Remote control:
BV7IRF • BV8FL • BV8IRF • BV8WFLIP
8Systemwiring
9Monitor installation
10 Releasing and opening the monitor
11 Powering up the monitor
11 Turning on thedome lights
12 Infrared audio transmission
BV7IRF • BV8IRF
12 Remote control battery replacement
13 Troubleshooting
14 Specifications
Congratulations on your purchase
of a Video Monitor.
It has been designed, engineered
and manufactured to bring you the
highest level of performance and
quality, and will afford you years of
viewing pleasure.
Thank you for making your
choice for car video entertainment!
A/V SYSTEM
Screen size
Screen format
Video Compatability
LCD panel type
Resolution, pixels
Brightness
A/V Inputs
GENERAL
Power requirements
Power consumption
Dimensions(L x W x H)
All specifications subject to change without notice.
MODEL
8"
16:9
NTSC/PAL Auto
Active Matrix TFT
1152 x 234
400 NITS
Video 2EA
12V DC
3W
2.8MHz/2.3MHz
12V DC
9W
9.8"x 9.5" x 1.6"
page
BV7.3FLIP
7.3" Flip Down Widescreen TFT Monitor
BV7.3IRF
7.3" Flip Down Widescreen TFT Monitor
with Built-In Infrared Audio Transmitter
BV8FL
8" Flip Down TFT Monitor
BV8WFLIP
8" Flip Down Widescreen TFT Monitor
BV8IRF
8" Flip Down Widescreen TFT Monitor
with Built-In Infrared Audio Transmitter
SYMPTOM CAUSE REMEDY
REMOTE IR SENSOR
1
POWER ON/OFF
This button turns the monitor system
on and off.
2
A/V SOURCE SELECTOR
Use this buttonto switch between
A/V Source 1 and A/V Source 2.
3
MENU
This buttonenables the on-screen
display menu system. Once enabled,
this buttonis used as an ENTER
button.
4
UP/DOWN BUTTONS
These buttons are used to increase
or decrease parameters in the on-
screen display menu system.
5
1 2 3 4 5
1/2" black self tapping
sheet metal screws
1" silver finish
threaded machine
screws
Press the monitor
release button
Pull the monitor screen
down to the desired angle
YELLOW
RED
WHITE
YELLOW
RED
WHITE

Thread all the wires through the
round hole in the center of the
mounting plate.
Install the monitor onto the
mounting plate, using the four
screws provided.
Using the four black self-tapping
screws provided, attach the monitor
mounting plate by screwing through
the headliner and into the existing
roof supports or the wood bracket
you made (see TIP below).
To lower the monitor, press the Monitor Release button and pull the monitor down.
It will drop freely to 45º.
To lower the monitor further, continue pulling down and the internal mechanism
will permit further movement and will hold the monitor in the position in which you
leave it.
To turn the monitor on, press and hold the POWER button for two seconds. When
the power is ON, if an input signal is present, the picture will bedisplayed on the
screen. If no signal is present, the monitor will display the message "NO SIGNAL."
If you know a video input signal is present but the monitor displays "NO SIGNAL,"
be sure to try pressing the AV SELECT button to see if your input source is connected
to the other AV input.
To adjust the monitor image, press MENU to access the various adjustment controls
such as BRIGHTNESS and CONTRAST. Use the +/- buttons to adjust each parameter
until you are satisfied with the picture quality.
This monitor features separate ON/OFF buttons for the right and left dome lights,
so that if you need not disturb a sleeping companion if you need overhead illumination.
The dome lights turn on when you open a door. To turn on or off the dome lights
manually, simply press the round button near the right dome light.
To turn the dome lights on or off manually, simply press the round button on the
side you wish the light to turn on.
To avoid accidental damage, we suggest you always close the monitor assembly
when it is not in use. To do so, rotate the monitor back to a 0º left-to-right position,
and push it up into the monitor base until you hear a “click.” Test that it is secured
by gently pulling down on monitor frame.
On a towel or soft cloth, gently place the monitor assembly “face down” on a stable
worksurface.
Using the wires provided, complete the audio, videoand power connections in
your vehicleas shown in the diagram below.
VIDEO INPUT 1
VIDEO INPUT 2
POWER
RED
BLACK
FUSE
to +12 VDC Battery
to Chassis Ground
VIDEO SOURCE 1
(DVD player, video game, etc.)
VIDEO SOURCE 2
(DVD player, video game, etc.)
DOME LIGHTS
RED
BLACK
BLUE
WHITE
Car dome lamp (+)
Car dome lamp (-)
to +12 VDC Battery
to Chassis Ground
On a towel or soft cloth, gently place the monitor assembly “face down” on a stable
worksurface.
Using the wires provided, complete the audio, videoand power connections in
your vehicleas shown in the diagram below.
DOME LIGHTS
RED
BLACK
BLUE
WHITE
Car dome lamp (+)
Car dome lamp (-)
to +12 VDC Battery
to Chassis Ground
Troubleshooting
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 13
Specifications
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 14
Monitor Controls and Features:
BV7.3FLIP • BV7IRF • BV8WFLIP • BV8IRF
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 4
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 3
Features What is included?
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 2
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 1
General precautions
Safety precautions
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 9
Remote Control:
BV7.3FLIP
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 6
Monitor Controls and Features: BV8FL
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 5
Remote Control:
BV7IRF • BV8FL • BV8IRF • BV8WFLIP
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 10 BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 11 BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 12
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 8
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 8
CONTENTS
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - Contents
U S E R ’ S M A N U A L
If you experience operation or performance problems with this product, compare your
installation with the electrical wiringdiagram on the previous page. If problems persist,
read the following troubleshooting tips which may help eliminate the problems.
When first unpacking your new flip-
down monitor, please check first that
the package contains all of the items
below. If something is missing, contact
the store where you purchased the
player.
• LCDmonitor housing
• Wireless remote control with
batteries
• RCA-RCA video cable
• Power cable
(BV7.3FLIP, BV8FL and BV8WFLIP)
(red/black with inline fuse and 2-pin
connector)
-or-
• Power/AV cable
(BV.3IRF and BV8IRF)
(red/black with inline fuse and 2-pin
connector, plus stereo RCA audio/RCA
video inputs for each of two channels))
• Dome light cable
(blue/red/white/black with 4-pin connector)
• Metal mounting plate
• (4) black 1/2" sheet metal screws
(for attaching mounting plate to car roof)
• (4) silver 1" machine screws
(for attaching monitor to mounting plate)
• Do not operate this equipment while
driving – safe driving should always
be your highest priority.
• This product should not be installed
in a location which allows the monitor
screen to be visible to the driver of the
vehicle. In some states and countries,
the viewing of images on a screeen
inside a vehicle is illegal, even by
people other than the driver. Be sure
that the installation and operation of
this system is in compliance with local
rules and regulations.
• If you have installed the monitor in a
position where it is visible to the driver,
be sure to installa Safety Cord. Wire
this cord to an accessory wirewhich
has +12v power when the ignition is
switched on. This will prevent the
operaton of the monitor when the
engine is running.
• Do not open or attempt to repair this
unit yourself. Dangerous high voltages
are present which may result in electric
shock. Refer any repairs to a qualified
service technician.
• Do not attempt to repair a damaged,
broken or faulty powercord. Replace
it with a new one immediately.
• To avoid risk of electronic shock or
damage to the monitor, donot permit
any of this equipment to become damp
or wet from water or drinks. If this does
occur, immediately unplug the power
cord and send the monitor to your
local dealer or service center as soon
as possible.
• if there is smoke or any peculiar odor
present during useor if there is damage
to any of the componentenclosures,
immediately unplug the power cord
and send the monitor to your local
dealer or service center as soon as
possible .
If you do not know how to install the
Safety Cord, please consult with a
mobile video installer in your area, and
have this work completed properly
before operating the video system.
Models BV7.3IRF and BV8IRF also
feature:
• Built-in wireless infrared audio
transmitter (for use with infrared
headphones, model HP-10)
1General precautions
1Safety precautions
2Installation precautions
2Operating precautions
3Features
3What is included?
4MonitorControls and Features:
BV7.3FLIP •BV7IRF • BV8FL • BV8IRF
5MonitorControls and Features:
BV8WFLIP
6Remote control: BV7.3FLIP
7Remote control:
BV7IRF • BV8FL • BV8IRF • BV8WFLIP
8Systemwiring
9Monitor installation
10 Releasing and opening the monitor
11 Powering up the monitor
11 Turning on thedome lights
12 Infrared audio transmission
BV7IRF • BV8IRF
12 Remote control battery replacement
13 Troubleshooting
14 Specifications
Congratulations on your purchase
of a Video Monitor.
It has been designed, engineered
and manufactured to bring you the
highest level of performance and
quality, and will afford you years of
viewing pleasure.
Thank you for making your
choice for car video entertainment!
A/V SYSTEM
Screen size
Screen format
Video Compatability
LCD panel type
Resolution, pixels
Brightness
A/V Inputs
GENERAL
Power requirements
Power consumption
Dimensions(L x W x H)
All specifications subject to change without notice.
MODEL
8"
16:9
NTSC/PAL Auto
Active Matrix TFT
1152 x 234
400 NITS
Video 2EA
12V DC
3W
2.8MHz/2.3MHz
12V DC
9W
9.8"x 9.5" x 1.6"
page
BV7.3FLIP
7.3" Flip Down Widescreen TFT Monitor
BV7.3IRF
7.3" Flip Down Widescreen TFT Monitor
with Built-In Infrared Audio Transmitter
BV8FL
8" Flip Down TFT Monitor
BV8WFLIP
8" Flip Down Widescreen TFT Monitor
BV8IRF
8" Flip Down Widescreen TFT Monitor
with Built-In Infrared Audio Transmitter
SYMPTOM CAUSE REMEDY
REMOTE IR SENSOR
1
POWER ON/OFF
This button turns the monitor system
on and off.
2
A/V SOURCE SELECTOR
Use this buttonto switch between
A/V Source 1 and A/V Source 2.
3
MENU
This buttonenables the on-screen
display menu system. Once enabled,
this buttonis used as an ENTER
button.
4
UP/DOWN BUTTONS
These buttons are used to increase
or decrease parameters in the on-
screen display menu system.
5
BV8FL
POWER
A/V SOURCE
MENU
+
1
2
3
4
5
1/2" black self tapping
sheet metal screws
1" silver finish
threaded machine
screws
Press the monitor
release button
Pull the monitor screen
down to the desired angle
YELLOW
RED
WHITE
YELLOW
RED
WHITE

Thread all the wires through the
round hole in the center of the
mounting plate.
Install the monitor onto the
mounting plate, using the four
screws provided.
Using the four black self-tapping
screws provided, attach the monitor
mounting plate by screwing through
the headliner and into the existing
roof supports or the wood bracket
you made (see TIP below).
To lower the monitor, press the Monitor Release button and pull the monitor down.
It will drop freely to 45º.
To lower the monitor further, continue pulling down and the internal mechanism
will permit further movement and will hold the monitor in the position in which you
leave it.
To turn the monitor on, press and hold the POWER button for two seconds. When
the power is ON, if an input signal is present, the picture will bedisplayed on the
screen. If no signal is present, the monitor will display the message "NO SIGNAL."
If you know a video input signal is present but the monitor displays "NO SIGNAL,"
be sure to try pressing the AV SELECT button to see if your input source is connected
to the other AV input.
To adjust the monitor image, press MENU to access the various adjustment controls
such as BRIGHTNESS and CONTRAST. Use the +/- buttons to adjust each parameter
until you are satisfied with the picture quality.
This monitor features separate ON/OFF buttons for the right and left dome lights,
so that if you need not disturb a sleeping companion if you need overhead illumination.
The dome lights turn on when you open a door. To turn on or off the dome lights
manually, simply press the round button near the right dome light.
To turn the dome lights on or off manually, simply press the round button on the
side you wish the light to turn on.
To avoid accidental damage, we suggest you always close the monitor assembly
when it is not in use. To do so, rotate the monitor back to a 0º left-to-right position,
and push it up into the monitor base until you hear a “click.” Test that it is secured
by gently pulling down on monitor frame.
On a towel or soft cloth, gently place the monitor assembly “face down” on a stable
worksurface.
Using the wires provided, complete the audio, videoand power connections in
your vehicleas shown in the diagram below.
VIDEO INPUT 1
VIDEO INPUT 2
POWER
RED
BLACK
FUSE
to +12 VDC Battery
to Chassis Ground
VIDEO SOURCE 1
(DVD player, video game, etc.)
VIDEO SOURCE 2
(DVD player, video game, etc.)
DOME LIGHTS
RED
BLACK
BLUE
WHITE
Car dome lamp (+)
Car dome lamp (-)
to +12 VDC Battery
to Chassis Ground
On a towel or soft cloth, gently place the monitor assembly “face down” on a stable
worksurface.
Using the wires provided, complete the audio, videoand power connections in
your vehicleas shown in the diagram below.
DOME LIGHTS
RED
BLACK
BLUE
WHITE
Car dome lamp (+)
Car dome lamp (-)
to +12 VDC Battery
to Chassis Ground
Troubleshooting
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 13
Specifications
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 14
Monitor Controls and Features:
BV7.3FLIP • BV7IRF • BV8WFLIP • BV8IRF
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 4
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 3
Features What is included?
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 2
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 1
General precautions
Safety precautions
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 9
Remote Control:
BV7.3FLIP
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 6
Monitor Controls and Features: BV8FL
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 5
Remote Control:
BV7IRF • BV8FL • BV8IRF • BV8WFLIP
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 10 BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 11 BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 12
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 8
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 8
CONTENTS
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - Contents
U S E R ’ S M A N U A L
If you experience operation or performance problems with this product, compare your
installation with the electrical wiring diagram on the previous page. If problems persist,
read the following troubleshooting tips which may help eliminate the problems.
When first unpacking your new flip-
down monitor, please check first that
the package contains all of the items
below. If something is missing, contact
the store where you purchased the
player.
• LCDmonitor housing
• Wireless remote control with
batteries
• RCA-RCA video cable
• Power cable
(BV7.3FLIP, BV8FL and BV8WFLIP)
(red/black with inline fuse and 2-pin
connector)
-or-
• Power/AV cable
(BV.3IRF and BV8IRF)
(red/black with inline fuse and 2-pin
connector, plus stereo RCA audio/RCA
video inputs for each of two channels))
• Dome light cable
(blue/red/white/black with 4-pin connector)
• Metal mounting plate
• (4) black 1/2" sheet metal screws
(for attaching mounting plate to car roof)
• (4) silver 1" machine screws
(for attaching monitor to mounting plate)
• Do not operate this equipment while
driving – safe driving should always
be your highest priority.
• This product should not be installed
in a location which allows the monitor
screen to be visible to the driver of the
vehicle. In some states and countries,
the viewing of images on a screeen
inside a vehicle is illegal, even by
people other than the driver. Be sure
that the installation and operation of
this system is in compliance with local
rules and regulations.
• If you have installed the monitor in a
position where it is visible to the driver,
be sure to installa Safety Cord. Wire
this cord to an accessory wirewhich
has +12v power when the ignition is
switched on. This will prevent the
operaton of the monitor when the
engine is running.
• Do not open or attempt to repair this
unit yourself. Dangerous high voltages
are present which may result in electric
shock. Refer any repairs to a qualified
service technician.
• Do not attempt to repair a damaged,
broken or faulty powercord. Replace
it with a new one immediately.
• To avoid risk of electronic shock or
damage to the monitor, donot permit
any of this equipment to become damp
or wet from water or drinks. If this does
occur, immediately unplug the power
cord and send the monitor to your
local dealer or service center as soon
as possible.
• if there is smoke or any peculiar odor
present during useor if there is damage
to any of the componentenclosures,
immediately unplug the power cord
and send the monitor to your local
dealer or service center as soon as
possible .
If you do not know how to install the
Safety Cord, please consult with a
mobile video installer in your area, and
have this work completed properly
before operating the video system.
Models BV7.3IRF and BV8IRF also
feature:
• Built-in wireless infrared audio
transmitter (for use with infrared
headphones, model HP-10)
1General precautions
1Safety precautions
2Installation precautions
2Operating precautions
3Features
3What is included?
4MonitorControls and Features:
BV7.3FLIP •BV7IRF • BV8FL • BV8IRF
5MonitorControls and Features:
BV8WFLIP
6Remote control: BV7.3FLIP
7Remote control:
BV7IRF • BV8FL • BV8IRF • BV8WFLIP
8Systemwiring
9Monitor installation
10 Releasing and opening the monitor
11 Powering up the monitor
11 Turning on thedome lights
12 Infrared audio transmission
BV7IRF • BV8IRF
12 Remote control battery replacement
13 Troubleshooting
14 Specifications
Congratulations on your purchase
of a Video Monitor.
It has been designed, engineered
and manufactured to bring you the
highest level of performance and
quality, and will afford you years of
viewing pleasure.
Thank you for making your
choice for car video entertainment!
A/V SYSTEM
Screen size
Screen format
Video Compatability
LCD panel type
Resolution, pixels
Brightness
A/V Inputs
GENERAL
Power requirements
Power consumption
Dimensions(L x W x H)
All specifications subject to change without notice.
MODEL
8"
16:9
NTSC/PAL Auto
Active Matrix TFT
1152 x 234
400 NITS
Video 2EA
12V DC
3W
2.8MHz/2.3MHz
12V DC
9W
9.8"x 9.5" x 1.6"
page
BV7.3FLIP
7.3" Flip Down Widescreen TFT Monitor
BV7.3IRF
7.3" Flip Down Widescreen TFT Monitor
with Built-In Infrared Audio Transmitter
BV8FL
8" Flip Down TFT Monitor
BV8WFLIP
8" Flip Down Widescreen TFT Monitor
BV8IRF
8" Flip Down Widescreen TFT Monitor
with Built-In Infrared Audio Transmitter
SYMPTOM CAUSE REMEDY
POWER
Press to turn unit ON or OFF.
1
BRIGHTNESS
Increase ordecrease the image
brightness with the (+) and (-) buttons.
2
CONTRAST
Increase ordecrease the monitor
contrast with the (+) and (-) buttons.
3
CHROMA
Use the (+) and (-) buttons to adjust
the image sharpness to the desired
level.
4
POWER
Press to turn unit ON or OFF.
1
A/V SOURCE SELECTOR
Use this buttonto switch between
A/V Source 1 and A/V Source 2.
2
MENU
This buttonenables the on-screen
display menu system. Once enabled,
this button is used as an ENTER button.
3
UP/DOWN BUTTONS
These buttons are used to increase
or decrease parameters in the on-
screen display menu system.
4
1
3
4
2
LCD MONITOR
REMOTE CONTROL UNI T
1 2
3
4
LCD MONI T OR
REM OT E CONTROL UNIT
POW ER AV1/AV2
MENU
1/2" black self tapping
sheet metal screws
1" silver finish
threaded machine
screws
Press the monitor
release button
Pull the monitor screen
down to the desired angle
YELLOW
RED
WHITE
YELLOW
RED
WHITE

Thread all the wires through the
round hole in the center of the
mounting plate.
Install the monitor onto the
mounting plate, using the four
screws provided.
Using the four black self-tapping
screws provided, attach the monitor
mounting plate by screwing through
the headliner and into the existing
roof supports orthe wood bracket
you made (see TIP below).
To lower the monitor, press the MonitorRelease button and pull the monitor down.
It will dropfreely to 45º.
To lower the monitor further, continue pulling down and the internal mechanism
will permit further movement and will hold the monitor in the position in which you
leave it.
To turn the monitor on, press and hold the POWER button for two seconds.When
the power is ON, if an input signal is present, the picture will be displayed on the
screen. If no signal ispresent,the monitor will display the message "NO SIGNAL."
If you know a video input signal is present but the monitor displays "NO SIGNAL,"
be sure to try pressing the AV SELECT button to see if your input source is connected
to the other AV input.
To adjust the monitor image, press MENU to access the various adjustment controls
such as BRIGHTNESS and CONTRAST. Use the +/- buttons to adjust each parameter
until you are satisfied with the picture quality.
This monitor features separate ON/OFF buttons for the right and left dome lights,
so that if you need not disturb a sleeping companion if you need overhead illumination.
Thedome lights turn on when you open a door.To turn on or off the dome lights
manually, simply press the round button near the right dome light.
To turn the dome lights on or off manually, simply press the round button on the
side you wish the light to turn on.
To avoid accidental damage, we suggest you always close the monitor assembly
when it is not in use. Todo so, rotate the monitor back to a 0º left-to-right position,
and push it up into the monitorbase until you hear a “click.” Test that it is secured
by gently pulling down on monitor frame.
On a towel or soft cloth, gently place the monitorassembly “face down” ona stable
worksurface.
Using the wires provided, complete the audio, video and power connections in
your vehicle as shown in the diagram below.
VIDEO INPUT 1
VIDEO INPUT 2
POWER
RED
BLACK
FUSE
to +12 VDC Battery
to Chassis Ground
VIDEO SOURCE 1
(DVD player, video game, etc.)
VIDEO SOURCE 2
(DVD player, video game, etc.)
DOME LIGHTS
RED
BLACK
BLUE
WHITE
Car dome lamp (+)
Car dome lamp (-)
to +12 VDC Battery
to Chassis Ground
On a towel or soft cloth, gently place the monitorassembly “face down” ona stable
worksurface.
Using the wires provided, complete the audio, video and power connections in
your vehicle as shown in the diagram below.
DOME LIGHTS
RED
BLACK
BLUE
WHITE
Car dome lamp (+)
Car dome lamp (-)
to +12 VDC Battery
to Chassis Ground
Troubleshooting
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 13
Specifications
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 14
Monitor Controls and Features:
BV7.3FLIP• BV7 IRF • BV8WFLIP • BV8IRF
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 4
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 3
Features What is included?
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 2
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 1
General precautions
Safety precautions
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 9
Remote Control:
BV7.3FLIP
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 6
Monitor Controls and Features: BV8FL
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 5
Remote Control:
BV7IRF • BV8FL • BV8IRF • BV8WFLIP
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 10 BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 11 BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 12
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 8
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 8
CONTENTS
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - Contents
U S E R ’ S M A N U A L
If you experience operation or performance problems with this product, compare your
installation with the electrical wiringdiagram on the previous page. If problems persist,
read the following troubleshooting tips which may help eliminate the problems.
When first unpacking your new flip-
down monitor, please check first that
the package contains all of the items
below. If something is missing, contact
the store where you purchased the
player.
• LCD monitor housing
• Wireless remote control with
batteries
• RCA-RCA video cable
• Power cable
(BV7.3FLIP, BV8FL and BV8WFLIP)
(red/black with inline fuse and 2-pin
connector)
-or-
• Power/AV cable
(BV.3IRF and BV8IRF)
(red/black with inline fuse and 2-pin
connector, plus stereo RCA audio/RCA
video inputs for each of two channels))
• Dome light cable
(blue/red/white/black with 4-pin connector)
• Metal mounting plate
• (4) black 1/2" sheet metalscrews
(for attaching mounting plate to car roof)
• (4) silver 1" machine screws
(for attaching monitor to mounting plate)
•Do not operate this equipment while
driving – safe driving should always
be your highest priority.
• This product should not be installed
in a location which allows the monitor
screen to be visible to the driver of the
vehicle. In some states and countries,
the viewing of images on a screeen
inside a vehicle is illegal, even by
people other than the driver. Be sure
that the installation and operation of
this system is in compliance with local
rules and regulations.
• If you have installed the monitor in a
position where it is visible to the driver,
be sure to install a Safety Cord. Wire
this cord to an accessory wire which
has +12v powerwhen the ignition is
switched on. This will prevent the
operaton of the monitor when the
engine is running.
•Do not open orattempt to repair this
unit yourself. Dangerous high voltages
are present which may result in electric
shock. Refer any repairs toa qualified
service technician.
•Do notattempt to repair a damaged,
broken or faulty power cord. Replace
it with a new one immediately.
• To avoid risk of electronic shock or
damage to the monitor, do not permit
any of this equipment to become damp
or wet from water or drinks. If this does
occur, immediately unplug the power
cordand send the monitor to your
local dealeror service center as soon
as possible.
• if there is smoke or any peculiar odor
present during useor if there is damage
to any of the component enclosures,
immediately unplug the power cord
and send the monitor to your local
dealer or service center as soon as
possible .
If you do not know how to install the
Safety Cord, please consult with a
mobile video installer in your area, and
have this work completed properly
before operating the video system.
Models BV7.3IRF and BV8IRF also
feature:
• Built-in wireless infrared audio
transmitter (for use with infrared
headphones, model HP-10)
System wiring: BV7.3FLIP • BV8FL • BV8WFLIP
1General precautions
1Safety precautions
2Installation precautions
2Operating precautions
3Features
3What is included?
4Monitor Controls and Features:
BV7.3FLIP• BV7IRF • BV8FL • BV8IRF
5Monitor Controls and Features:
BV8WFLIP
6Remote control: BV7.3FLIP
7Remote control:
BV7IRF • BV8FL •BV8IRF • BV8WFLIP
8System wiring
9Monitor installation
10 Releasing and opening the monitor
11 Powering up the monitor
11 Turning on the dome lights
12 Infrared audio transmission
BV7IRF • BV8IRF
12 Remote control battery replacement
13 Troubleshooting
14 Specifications
Congratulations on your purchase
of a Video Monitor.
It has been designed, engineered
and manufactured to bringyou the
highest level of performance and
quality, and will afford you years of
viewing pleasure.
Thankyou for making your
choice for carvideo entertainment!
A/V SYSTEM
Screen size
Screen format
Video Compatability
LCD panel type
Resolution, pixels
Brightness
A/V Inputs
GENERAL
Power requirements
Power consumption
Dimensions(L x W x H)
All specifications subject to change without notice.
MODEL
8"
16:9
NTSC/PAL Auto
Active Matrix TFT
1152 x 234
400 NITS
Video 2EA
12V DC
3W
2.8MHz/2.3MHz
12V DC
9W
9.8"x 9.5" x 1.6"
page
BV7.3FLIP
7.3" Flip Down Widescreen TFT Monitor
BV7.3IRF
7.3" Flip Down Widescreen TFT Monitor
with Built-In Infrared Audio Transmitter
BV8FL
8" Flip Down TFT Monitor
BV8WFLIP
8" Flip Down Widescreen TFT Monitor
BV8IRF
8" Flip Down Widescreen TFT Monitor
with Built-In Infrared Audio Transmitter
SYMPTOM CAUSE REMEDY
1/2" black self tapping
sheet metal screws
1" silver finish
threaded machine
screws
Press the monitor
release button
Pull the monitor screen
down to the desired angle
YELLOW
RED
WHITE
YELLOW
RED
WHITE

Thread all the wires through the
round hole in the center of the
mounting plate.
Install the monitor onto the
mounting plate, using the four
screws provided.
Using the four black self-tapping
screws provided, attach the monitor
mounting plate by screwing through
the headliner and into the existing
roof supports orthe wood bracket
you made (see TIP below).
To lower the monitor, press the MonitorRelease button and pull the monitor down.
It will dropfreely to 45º.
To lower the monitor further, continue pulling down and the internal mechanism
will permit further movement and will hold the monitor in the position in which you
leave it.
To turn the monitor on, press and hold the POWER button for two seconds.When
the power is ON, if an input signal is present, the picture will be displayed on the
screen. If no signal ispresent,the monitor will display the message "NO SIGNAL."
If you know a video input signal is present but the monitor displays "NO SIGNAL,"
be sure to try pressing the AV SELECT button to see if your input source is connected
to the other AV input.
To adjust the monitor image, press MENU to access the various adjustment controls
such as BRIGHTNESS and CONTRAST. Use the +/- buttons to adjust each parameter
until you are satisfied with the picture quality.
This monitor features separate ON/OFF buttons for the right and left dome lights,
so that if you need not disturb a sleeping companion if you need overhead illumination.
Thedome lights turn on when you open a door.To turn on or off the dome lights
manually, simply press the round button near the right dome light.
To turn the dome lights on or off manually, simply press the round button on the
side you wish the light to turn on.
To avoid accidental damage, we suggest you always close the monitor assembly
when it is not in use. Todo so, rotate the monitor back to a 0º left-to-right position,
and push it up into the monitorbase until you hear a “click.” Test that it is secured
by gently pulling down on monitor frame.
On a towel or soft cloth, gently place the monitor assembly “face down” on a stable
worksurface.
Using the wires provided, complete the audio, videoand power connections in
your vehicleas shown in the diagram below.
VIDEO INPUT 1
VIDEO INPUT 2
POWER
RED
BLACK
FUSE
to +12 VDC Battery
to Chassis Ground
VIDEO SOURCE 1
(DVD player, video game, etc.)
VIDEO SOURCE 2
(DVD player, video game, etc.)
DOME LIGHTS
RED
BLACK
BLUE
WHITE
Car dome lamp (+)
Car dome lamp (-)
to +12 VDC Battery
to Chassis Ground
On a towel or soft cloth, gently place the monitorassembly “face down” ona stable
worksurface.
Using the wires provided, complete the audio, video and power connections in
your vehicle as shown in the diagram below.
DOME LIGHTS
RED
BLACK
BLUE
WHITE
Car dome lamp (+)
Car dome lamp (-)
to +12 VDC Battery
to Chassis Ground
Troubleshooting
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 13
Specifications
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 14
Monitor Controls and Features:
BV7.3FLIP• BV7 IRF • BV8WFLIP • BV8IRF
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 4
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 3
Features What is included?
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 2
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 1
General precautions
Safety precautions
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 9
Remote Control:
BV7.3FLIP
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 6
Monitor Controls and Features: BV8FL
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 5
Remote Control:
BV7IRF • BV8FL • BV8IRF • BV8WFLIP
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 10 BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 11 BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 12
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 8
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 8
CONTENTS
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - Contents
U S E R ’ S M A N U A L
If you experience operation or performance problems with this product, compare your
installation with the electrical wiringdiagram on the previous page. If problems persist,
read the following troubleshooting tips which may help eliminate the problems.
When first unpacking your new flip-
down monitor, please check first that
the package contains all of the items
below. If something is missing, contact
the store where you purchased the
player.
• LCD monitor housing
• Wireless remote control with
batteries
• RCA-RCA video cable
• Power cable
(BV7.3FLIP, BV8FL and BV8WFLIP)
(red/black with inline fuse and 2-pin
connector)
-or-
• Power/AV cable
(BV.3IRF and BV8IRF)
(red/black with inline fuse and 2-pin
connector, plus stereo RCA audio/RCA
video inputs for each of two channels))
• Dome light cable
(blue/red/white/black with 4-pin connector)
• Metal mounting plate
• (4) black 1/2" sheet metalscrews
(for attaching mounting plate to car roof)
• (4) silver 1" machine screws
(for attaching monitor to mounting plate)
•Do not operate this equipment while
driving – safe driving should always
be your highest priority.
• This product should not be installed
in a location which allows the monitor
screen to be visible to the driver of the
vehicle. In some states and countries,
the viewing of images on a screeen
inside a vehicle is illegal, even by
people other than the driver. Be sure
that the installation and operation of
this system is in compliance with local
rules and regulations.
• If you have installed the monitor in a
position where it is visible to the driver,
be sure to install a Safety Cord. Wire
this cord to an accessory wire which
has +12v powerwhen the ignition is
switched on. This will prevent the
operaton of the monitor when the
engine is running.
•Do not open orattempt to repair this
unit yourself. Dangerous high voltages
are present which may result in electric
shock. Refer any repairs toa qualified
service technician.
•Do notattempt to repair a damaged,
broken or faulty power cord. Replace
it with a new one immediately.
• To avoid risk of electronic shock or
damage to the monitor, do not permit
any of this equipment to become damp
or wet from water or drinks. If this does
occur, immediately unplug the power
cordand send the monitor to your
local dealeror service center as soon
as possible.
• if there is smoke or any peculiar odor
present during useor if there is damage
to any of the component enclosures,
immediately unplug the power cord
and send the monitor to your local
dealer or service center as soon as
possible .
If you do not know how to install the
Safety Cord, please consult with a
mobile video installer in your area, and
have this work completed properly
before operating the video system.
Models BV7.3IRF and BV8IRF also
feature:
• Built-in wireless infrared audio
transmitter (for use with infrared
headphones, model HP-10)
System wiring: BV7.3IRF • BV8IRF
1General precautions
1Safety precautions
2Installation precautions
2Operating precautions
3Features
3What is included?
4MonitorControls and Features:
BV7.3FLIP •BV7IRF • BV8FL • BV8IRF
5MonitorControls and Features:
BV8WFLIP
6Remote control: BV7.3FLIP
7Remote control:
BV7IRF • BV8FL • BV8IRF • BV8WFLIP
8Systemwiring
9Monitor installation
10 Releasing and opening the monitor
11 Powering up the monitor
11 Turning on thedome lights
12 Infrared audio transmission
BV7IRF • BV8IRF
12 Remote control battery replacement
13 Troubleshooting
14 Specifications
Congratulations on your purchase
of a Video Monitor.
It has been designed, engineered
and manufactured to bring you the
highest level of performance and
quality, and will afford you years of
viewing pleasure.
Thank you for making your
choice for car video entertainment!
A/V SYSTEM
Screen size
Screen format
Video Compatability
LCD panel type
Resolution, pixels
Brightness
A/V Inputs
GENERAL
Power requirements
Power consumption
Dimensions(L x W x H)
All specifications subject to change without notice.
MODEL
8"
16:9
NTSC/PAL Auto
Active Matrix TFT
1152 x 234
400 NITS
Video 2EA
12V DC
3W
2.8MHz/2.3MHz
12V DC
9W
9.8"x 9.5" x 1.6"
page
BV7.3FLIP
7.3" Flip Down Widescreen TFT Monitor
BV7.3IRF
7.3" Flip Down Widescreen TFT Monitor
with Built-In Infrared Audio Transmitter
BV8FL
8" Flip Down TFT Monitor
BV8WFLIP
8" Flip Down Widescreen TFT Monitor
BV8IRF
8" Flip Down Widescreen TFT Monitor
with Built-In Infrared Audio Transmitter
SYMPTOM CAUSE REMEDY
1/2" black self tapping
sheet metal screws
1" silver finish
threaded machine
screws
Press the monitor
release button
Pull the monitor screen
down to the desired angle
POWER
RED
BLACK
FUSE
to +12 VDC Battery
to Chassis Ground
VIDEO SOURCE 1
(DVD player, video
game, etc.)
VIDEO
OUTPUT
AUDIO OUTPUTS
L
R
VIDEO SOURCE 2
(DVD player, video
game, etc.)
VIDEO
OUTPUT
AUDIO OUTPUTS
L
R
YELLOW
RED
WHITE
YELLOW
RED
WHITE

Thread all the wires through the
round hole in the center of the
mounting plate.
Install the monitor onto the
mounting plate, using the four
screws provided.
Using the four black self-tapping
screws provided, attach the monitor
mounting plate by screwing through
the headliner and into the existing
roof supports orthe wood bracket
you made (see TIP below).
To lower the monitor, press the MonitorRelease button and pull the monitor down.
It will dropfreely to 45º.
To lower the monitor further, continue pulling down and the internal mechanism
will permit further movement and will hold the monitor in the position in which you
leave it.
To turn the monitor on, press and hold the POWER button for two seconds.When
the power is ON, if an input signal is present, the picture will be displayed on the
screen. If no signal ispresent,the monitor will display the message "NO SIGNAL."
If you know a video input signal is present but the monitor displays "NO SIGNAL,"
be sure to try pressing the AV SELECT button to see if your input source is connected
to the other AV input.
To adjust the monitor image, press MENU to access the various adjustment controls
such as BRIGHTNESS and CONTRAST. Use the +/- buttons to adjust each parameter
until you are satisfied with the picture quality.
This monitor features separate ON/OFF buttons for the right and left dome lights,
so that if you need not disturb a sleeping companion if you need overhead illumination.
Thedome lights turn on when you open a door.To turn on or off the dome lights
manually, simply press the round button near the right dome light.
To turn the dome lights on or off manually, simply press the round button on the
side you wish the light to turn on.
To avoid accidental damage, we suggest you always close the monitor assembly
when it is not in use. Todo so, rotate the monitor back to a 0º left-to-right position,
and push it up into the monitorbase until you hear a “click.” Test that it is secured
by gently pulling down on monitor frame.
On a towel or soft cloth, gently place the monitor assembly “face down” on a stable
worksurface.
Using the wires provided, complete the audio, videoand power connections in
your vehicleas shown in the diagram below.
VIDEO INPUT 1
VIDEO INPUT 2
POWER
RED
BLACK
FUSE
to +12 VDC Battery
to Chassis Ground
VIDEO SOURCE 1
(DVD player, video game, etc.)
VIDEO SOURCE 2
(DVD player, video game, etc.)
DOME LIGHTS
RED
BLACK
BLUE
WHITE
Car dome lamp (+)
Car dome lamp (-)
to +12 VDC Battery
to Chassis Ground
On a towel or soft cloth, gently place the monitor assembly “face down” on a stable
worksurface.
Using the wires provided, complete the audio, videoand power connections in
your vehicleas shown in the diagram below.
DOME LIGHTS
RED
BLACK
BLUE
WHITE
Car dome lamp (+)
Car dome lamp (-)
to +12 VDC Battery
to Chassis Ground
Troubleshooting
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 13
Specifications
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 14
Monitor Controls and Features:
BV7.3FLIP• BV7 IRF • BV8WFLIP • BV8IRF
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 4
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 3
Features What is included?
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 2
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 1
General precautions
Safety precautions
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 9
Remote Control:
BV7.3FLIP
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 6
Monitor Controls and Features: BV8FL
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 5
Remote Control:
BV7IRF • BV8FL • BV8IRF • BV8WFLIP
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 10 BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 11 BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 12
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 8
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 8
CONTENTS
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - Contents
U S E R ’ S M A N U A L
If you experience operation or performance problems with this product, compare your
installation with the electrical wiringdiagram on the previous page. If problems persist,
read the following troubleshooting tips which may help eliminate the problems.
When first unpacking your new flip-
down monitor, please check first that
the package contains all of the items
below. If something is missing, contact
the store where you purchased the
player.
• LCD monitor housing
• Wireless remote control with
batteries
• RCA-RCA video cable
• Power cable
(BV7.3FLIP, BV8FL and BV8WFLIP)
(red/black with inline fuse and 2-pin
connector)
-or-
• Power/AV cable
(BV.3IRF and BV8IRF)
(red/black with inline fuse and 2-pin
connector, plus stereo RCA audio/RCA
video inputs for each of two channels))
• Dome light cable
(blue/red/white/black with 4-pin connector)
• Metal mounting plate
• (4) black 1/2" sheet metalscrews
(for attaching mounting plate to car roof)
• (4) silver 1" machine screws
(for attaching monitor to mounting plate)
•Do not operate this equipment while
driving – safe driving should always
be your highest priority.
• This product should not be installed
in a location which allows the monitor
screen to be visible to the driver of the
vehicle. In some states and countries,
the viewing of images on a screeen
inside a vehicle is illegal, even by
people other than the driver. Be sure
that the installation and operation of
this system is in compliance with local
rules and regulations.
• If you have installed the monitor in a
position where it is visible to the driver,
be sure to install a Safety Cord. Wire
this cord to an accessory wire which
has +12v powerwhen the ignition is
switched on. This will prevent the
operaton of the monitor when the
engine is running.
Monitor installation
INSTALLATION TIP
Make a MOUNTING BRACKET out of wood. This bracket mounts under the headliner,
and provides a mounting surface to which the housing of the flip-down monitor can
be attached.
•Do not open orattempt to repair this
unit yourself. Dangerous high voltages
are present which may result in electric
shock. Refer any repairs toa qualified
service technician.
•Do notattempt to repair a damaged,
broken or faulty power cord. Replace
it with a new one immediately.
• To avoid risk of electronic shock or
damage to the monitor, do not permit
any of this equipment to become damp
or wet from water or drinks. If this does
occur, immediately unplug the power
cordand send the monitor to your
local dealeror service center as soon
as possible.
• if there is smoke or any peculiar odor
present during useor if there is damage
to any of the component enclosures,
immediately unplug the power cord
and send the monitor to your local
dealer or service center as soon as
possible .
If you do not know how to install the
Safety Cord, please consult with a
mobile video installer in your area, and
have this work completed properly
before operating the video system.
Models BV7.3IRF and BV8IRF also
feature:
• Built-in wireless infrared audio
transmitter (for use with infrared
headphones, model HP-10)
1General precautions
1Safety precautions
2Installation precautions
2Operating precautions
3Features
3What is included?
4MonitorControls and Features:
BV7.3FLIP •BV7IRF • BV8FL • BV8IRF
5MonitorControls and Features:
BV8WFLIP
6Remote control: BV7.3FLIP
7Remote control:
BV7IRF • BV8FL • BV8IRF • BV8WFLIP
8Systemwiring
9Monitor installation
10 Releasing and opening the monitor
11 Powering up the monitor
11 Turning on thedome lights
12 Infrared audio transmission
BV7IRF • BV8IRF
12 Remote control battery replacement
13 Troubleshooting
14 Specifications
Congratulations on your purchase
of a Video Monitor.
It has been designed, engineered
and manufactured to bring you the
highest level of performance and
quality, and will afford you years of
viewing pleasure.
Thank you for making your
choice for car video entertainment!
A/V SYSTEM
Screen size
Screen format
Video Compatability
LCD panel type
Resolution, pixels
Brightness
A/V Inputs
GENERAL
Power requirements
Power consumption
Dimensions(L x W x H)
All specifications subject to change without notice.
MODEL
8"
16:9
NTSC/PAL Auto
Active Matrix TFT
1152 x 234
400 NITS
Video 2EA
12V DC
3W
2.8MHz/2.3MHz
12V DC
9W
9.8"x 9.5" x 1.6"
page
BV7.3FLIP
7.3" Flip Down Widescreen TFT Monitor
BV7.3IRF
7.3" Flip Down Widescreen TFT Monitor
with Built-In Infrared Audio Transmitter
BV8FL
8" Flip Down TFT Monitor
BV8WFLIP
8" Flip Down Widescreen TFT Monitor
BV8IRF
8" Flip Down Widescreen TFT Monitor
with Built-In Infrared Audio Transmitter
SYMPTOM CAUSE REMEDY
If you have any doubts about this type of installation, please consult
your local mobile electronics retailer. Making holes in the roof of
your vehicle will cause damage which is expensive to repair.
CAUTION: Make sure the
screws are NOT long enough
to go through the roof!
1/2" black self tapping
sheet metal screws
1" silver finish
threaded machine
screws
Press the monitor
release button
Pull the monitor screen
down to the desired angle
YELLOW
RED
WHITE
YELLOW
RED
WHITE

Thread all the wires through the
round hole in the center of the
mounting plate.
Install the monitor onto the
mounting plate, using the four
screws provided.
Using the four black self-tapping
screws provided, attach the monitor
mounting plate by screwing through
the headliner and into the existing
roof supports or the wood bracket
you made (see TIP below).
To lower the monitor, press the MonitorRelease button and pull the monitor down.
It will dropfreely to 45º.
To lower the monitor further, continue pulling down and the internal mechanism
will permit further movement and will hold the monitor in the position in which you
leave it.
To turn the monitor on, press and hold the POWER button for two seconds.When
the power is ON, if an input signal is present, the picture will be displayed on the
screen. If no signal ispresent,the monitor will display the message "NO SIGNAL."
If you know a video input signal is present but the monitor displays "NO SIGNAL,"
be sure to try pressing the AV SELECT button to see if your input source is connected
to the other AV input.
To adjust the monitor image, press MENU to access the various adjustment controls
such as BRIGHTNESS and CONTRAST. Use the +/- buttons to adjust each parameter
until you are satisfied with the picture quality.
This monitor features separate ON/OFF buttons for the right and left dome lights,
so that if you need not disturb a sleeping companion if you need overhead illumination.
Thedome lights turn on when you open a door.To turn on or off the dome lights
manually, simply press the round button near the right dome light.
To turn the dome lights on or off manually, simply press the round button on the
side you wish the light to turn on.
To avoid accidental damage, we suggest you always close the monitor assembly
when it is not in use. Todo so, rotate the monitor back to a 0º left-to-right position,
and push it up into the monitorbase until you hear a “click.” Test that it is secured
by gently pulling down on monitor frame.
On a towel or soft cloth, gently place the monitor assembly “face down” on a stable
worksurface.
Using the wires provided, complete the audio, videoand power connections in
your vehicleas shown in the diagram below.
VIDEO INPUT 1
VIDEO INPUT 2
POWER
RED
BLACK
FUSE
to +12 VDC Battery
to Chassis Ground
VIDEO SOURCE 1
(DVD player, video game, etc.)
VIDEO SOURCE 2
(DVD player, video game, etc.)
DOME LIGHTS
RED
BLACK
BLUE
WHITE
Car dome lamp (+)
Car dome lamp (-)
to +12 VDC Battery
to Chassis Ground
On a towel or soft cloth, gently place the monitor assembly “face down” on a stable
worksurface.
Using the wires provided, complete the audio, videoand power connections in
your vehicleas shown in the diagram below.
DOME LIGHTS
RED
BLACK
BLUE
WHITE
Car dome lamp (+)
Car dome lamp (-)
to +12 VDC Battery
to Chassis Ground
Troubleshooting
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 13
Specifications
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 14
Monitor Controls and Features:
BV7.3FLIP• BV7 IRF • BV8WFLIP • BV8IRF
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 4
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 3
Features What is included?
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 2
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 1
General precautions
Safety precautions
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 9
Remote Control:
BV7.3FLIP
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 6
Monitor Controls and Features: BV8FL
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 5
Remote Control:
BV7IRF • BV8FL • BV8IRF • BV8WFLIP
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 10 BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 11 BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 12
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 8
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 8
CONTENTS
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - Contents
U S E R ’ S M A N U A L
If you experience operation or performance problems with this product, compare your
installation with the electrical wiringdiagram on the previous page. If problems persist,
read the following troubleshooting tips which may help eliminate the problems.
When first unpacking your new flip-
down monitor, please check first that
the package contains all of the items
below. If something is missing, contact
the store where you purchased the
player.
• LCD monitor housing
• Wireless remote control with
batteries
• RCA-RCA video cable
• Power cable
(BV7.3FLIP, BV8FL and BV8WFLIP)
(red/black with inline fuse and 2-pin
connector)
-or-
• Power/AV cable
(BV.3IRF and BV8IRF)
(red/black with inline fuse and 2-pin
connector, plus stereo RCA audio/RCA
video inputs for each of two channels))
• Dome light cable
(blue/red/white/black with 4-pin connector)
• Metal mounting plate
• (4) black 1/2" sheet metalscrews
(for attaching mounting plate to car roof)
• (4) silver 1" machine screws
(for attaching monitor to mounting plate)
• Do not operate this equipment while
driving – safe driving should always
be your highest priority.
• This product should not be installed
in a location which allows the monitor
screen to be visible to the driver of the
vehicle. In some states and countries,
the viewing of images on a screeen
inside a vehicle is illegal, even by
people other than the driver. Be sure
that the installation and operation of
this system is in compliance with local
rules and regulations.
• If you have installed the monitor in a
position where it is visible to the driver,
be sure to installa Safety Cord. Wire
this cord to an accessory wirewhich
has +12v power when the ignition is
switched on. This will prevent the
operaton of the monitor when the
engine is running.
• Do not open or attempt to repair this
unit yourself. Dangerous high voltages
are present which may result in electric
shock. Refer any repairs to a qualified
service technician.
• Do not attempt to repair a damaged,
broken or faulty powercord. Replace
it with a new one immediately.
• To avoid risk of electronic shock or
damage to the monitor, donot permit
any of this equipment to become damp
or wet from water or drinks. If this does
occur, immediately unplug the power
cord and send the monitor to your
local dealer or service center as soon
as possible.
• if there is smoke or any peculiar odor
present during useor if there is damage
to any of the componentenclosures,
immediately unplug the power cord
and send the monitor to your local
dealer or service center as soon as
possible .
If you do not know how to install the
Safety Cord, please consult with a
mobile video installer in your area, and
have this work completed properly
before operating the video system.
Models BV7.3IRF and BV8IRF also
feature:
• Built-in wireless infrared audio
transmitter (for use with infrared
headphones, model HP-10)
Releasing and lowering the monitor
1General precautions
1Safety precautions
2Installation precautions
2Operating precautions
3Features
3What is included?
4MonitorControls and Features:
BV7.3FLIP •BV7IRF • BV8FL • BV8IRF
5MonitorControls and Features:
BV8WFLIP
6Remote control: BV7.3FLIP
7Remote control:
BV7IRF • BV8FL • BV8IRF • BV8WFLIP
8Systemwiring
9Monitor installation
10 Releasing and opening the monitor
11 Powering up the monitor
11 Turning on thedome lights
12 Infrared audio transmission
BV7IRF • BV8IRF
12 Remote control battery replacement
13 Troubleshooting
14 Specifications
Congratulations on your purchase
of a Video Monitor.
It has been designed, engineered
and manufactured to bring you the
highest level of performance and
quality, and will afford you years of
viewing pleasure.
Thank you for making your
choice for car video entertainment!
A/V SYSTEM
Screen size
Screen format
Video Compatability
LCD panel type
Resolution, pixels
Brightness
A/V Inputs
GENERAL
Power requirements
Power consumption
Dimensions(L x W x H)
All specifications subject to change without notice.
MODEL
8"
16:9
NTSC/PAL Auto
Active Matrix TFT
1152 x 234
400 NITS
Video 2EA
12V DC
3W
2.8MHz/2.3MHz
12V DC
9W
9.8"x 9.5" x 1.6"
page
BV7.3FLIP
7.3" Flip Down Widescreen TFT Monitor
BV7.3IRF
7.3" Flip Down Widescreen TFT Monitor
with Built-In Infrared Audio Transmitter
BV8FL
8" Flip Down TFT Monitor
BV8WFLIP
8" Flip Down Widescreen TFT Monitor
BV8IRF
8" Flip Down Widescreen TFT Monitor
with Built-In Infrared Audio Transmitter
SYMPTOM CAUSE REMEDY
1/2" black self tapping
sheet metal screws
1" silver finish
threaded machine
screws
Press the monitor
release button
Pull the monitor screen
down to the desired angle
YELLOW
RED
WHITE
YELLOW
RED
WHITE

Thread all the wires through the
round hole in the center of the
mounting plate.
Install the monitor onto the
mounting plate, using the four
screws provided.
Using the four black self-tapping
screws provided, attach the monitor
mounting plate by screwing through
the headliner and into the existing
roof supports or the wood bracket
you made (see TIP below).
To lower the monitor, press the Monitor Release button and pull the monitor down.
It will drop freely to 45º.
To lower the monitor further, continue pulling down and the internal mechanism
will permit further movement and will hold the monitor in the position in which you
leave it.
To turn the monitor on, press and hold the POWER button for two seconds.When
the power is ON, if an input signal is present, the picture will be displayed on the
screen. If no signal ispresent,the monitor will display the message "NO SIGNAL."
If you know a video input signal is present but the monitor displays "NO SIGNAL,"
be sure to try pressing the AV SELECT button to see if your input source is connected
to the other AV input.
To adjust the monitor image, press MENU to access the various adjustment controls
such as BRIGHTNESS and CONTRAST. Use the +/- buttons to adjust each parameter
until you are satisfied with the picture quality.
This monitor features separate ON/OFF buttons for the right and left dome lights,
so that if you need not disturb a sleeping companion if you need overhead illumination.
Thedome lights turn on when you open a door.To turn on or off the dome lights
manually, simply press the round button near the right dome light.
To turn the dome lights on or off manually, simply press the round button on the
side you wish the light to turn on.
To avoid accidental damage, we suggest you always close the monitor assembly
when it is not in use. To do so, rotate the monitor back to a 0º left-to-right position,
and push it up into the monitor base until you hear a “click.” Test that it is secured
by gently pulling down on monitor frame.
On a towel or soft cloth, gently place the monitor assembly “face down” on a stable
worksurface.
Using the wires provided, complete the audio, videoand power connections in
your vehicleas shown in the diagram below.
VIDEO INPUT 1
VIDEO INPUT 2
POWER
RED
BLACK
FUSE
to +12 VDC Battery
to Chassis Ground
VIDEO SOURCE 1
(DVD player, video game, etc.)
VIDEO SOURCE 2
(DVD player, video game, etc.)
DOME LIGHTS
RED
BLACK
BLUE
WHITE
Car dome lamp (+)
Car dome lamp (-)
to +12 VDC Battery
to Chassis Ground
On a towel or soft cloth, gently place the monitor assembly “face down” on a stable
worksurface.
Using the wires provided, complete the audio, videoand power connections in
your vehicleas shown in the diagram below.
DOME LIGHTS
RED
BLACK
BLUE
WHITE
Car dome lamp (+)
Car dome lamp (-)
to +12 VDC Battery
to Chassis Ground
Troubleshooting
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 13
Specifications
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 14
Monitor Controls and Features:
BV7.3FLIP• BV7 IRF • BV8WFLIP • BV8IRF
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 4
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 3
Features What is included?
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 2
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 1
General precautions
Safety precautions
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 9
Remote Control:
BV7.3FLIP
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 6
Monitor Controls and Features: BV8FL
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 5
Remote Control:
BV7IRF • BV8FL • BV8IRF • BV8WFLIP
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 10 BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 11 BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 12
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 8
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 8
CONTENTS
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - Contents
U S E R ’ S M A N U A L
If you experience operation or performance problems with this product, compare your
installation with the electrical wiringdiagram on the previous page. If problems persist,
read the following troubleshooting tips which may help eliminate the problems.
When first unpacking your new flip-
down monitor, please check first that
the package contains all of the items
below. If something is missing, contact
the store where you purchased the
player.
• LCDmonitor housing
• Wireless remote control with
batteries
• RCA-RCA video cable
• Power cable
(BV7.3FLIP, BV8FL and BV8WFLIP)
(red/black with inline fuse and 2-pin
connector)
-or-
• Power/AV cable
(BV.3IRF and BV8IRF)
(red/black with inline fuse and 2-pin
connector, plus stereo RCA audio/RCA
video inputs for each of two channels))
• Dome light cable
(blue/red/white/black with 4-pin connector)
• Metal mounting plate
• (4) black 1/2" sheet metal screws
(for attaching mounting plate to car roof)
• (4) silver 1" machine screws
(for attaching monitor to mounting plate)
• Do not operate this equipment while
driving – safe driving should always
be your highest priority.
• This product should not be installed
in a location which allows the monitor
screen to be visible to the driver of the
vehicle. In some states and countries,
the viewing of images on a screeen
inside a vehicle is illegal, even by
people other than the driver. Be sure
that the installation and operation of
this system is in compliance with local
rules and regulations.
• If you have installed the monitor in a
position where it is visible to the driver,
be sure to installa Safety Cord. Wire
this cord to an accessory wirewhich
has +12v power when the ignition is
switched on. This will prevent the
operaton of the monitor when the
engine is running.
• Do not open or attempt to repair this
unit yourself. Dangerous high voltages
are present which may result in electric
shock. Refer any repairs to a qualified
service technician.
• Do not attempt to repair a damaged,
broken or faulty powercord. Replace
it with a new one immediately.
• To avoid risk of electronic shock or
damage to the monitor, donot permit
any of this equipment to become damp
or wet from water or drinks. If this does
occur, immediately unplug the power
cord and send the monitor to your
local dealer or service center as soon
as possible.
• if there is smoke or any peculiar odor
present during useor if there is damage
to any of the componentenclosures,
immediately unplug the power cord
and send the monitor to your local
dealer or service center as soon as
possible .
If you do not know how to install the
Safety Cord, please consult with a
mobile video installer in your area, and
have this work completed properly
before operating the video system.
Models BV7.3IRF and BV8IRF also
feature:
• Built-in wireless infrared audio
transmitter (for use with infrared
headphones, model HP-10)
Powering up the monitor
Turning on the dome lights
1General precautions
1Safety precautions
2Installation precautions
2Operating precautions
3Features
3What is included?
4MonitorControls and Features:
BV7.3FLIP •BV7IRF • BV8FL • BV8IRF
5MonitorControls and Features:
BV8WFLIP
6Remote control: BV7.3FLIP
7Remote control:
BV7IRF • BV8FL • BV8IRF • BV8WFLIP
8Systemwiring
9Monitor installation
10 Releasing and opening the monitor
11 Powering up the monitor
11 Turning on thedome lights
12 Infrared audio transmission
BV7IRF • BV8IRF
12 Remote control battery replacement
13 Troubleshooting
14 Specifications
Congratulations on your purchase
of a Video Monitor.
It has been designed, engineered
and manufactured to bring you the
highest level of performance and
quality, and will afford you years of
viewing pleasure.
Thank you for making your
choice for car video entertainment!
A/V SYSTEM
Screen size
Screen format
Video Compatability
LCD panel type
Resolution, pixels
Brightness
A/V Inputs
GENERAL
Power requirements
Power consumption
Dimensions(L x W x H)
All specifications subject to change without notice.
MODEL
8"
16:9
NTSC/PAL Auto
Active Matrix TFT
1152 x 234
400 NITS
Video 2EA
12V DC
3W
2.8MHz/2.3MHz
12V DC
9W
9.8"x 9.5" x 1.6"
page
BV7.3FLIP
7.3" Flip Down Widescreen TFT Monitor
BV7.3IRF
7.3" Flip Down Widescreen TFT Monitor
with Built-In Infrared Audio Transmitter
BV8FL
8" Flip Down TFT Monitor
BV8WFLIP
8" Flip Down Widescreen TFT Monitor
BV8IRF
8" Flip Down Widescreen TFT Monitor
with Built-In Infrared Audio Transmitter
SYMPTOM CAUSE REMEDY
1/2" black self tapping
sheet metal screws
1" silver finish
threaded machine
screws
Press the monitor
release button
Pull the monitor screen
down to the desired angle
YELLOW
RED
WHITE
YELLOW
RED
WHITE

Thread all the wires through the
round hole in the center of the
mounting plate.
Install the monitor onto the
mounting plate, using the four
screws provided.
Using the four black self-tapping
screws provided, attach the monitor
mounting plate by screwing through
the headliner and into the existing
roof supports or the wood bracket
you made (see TIP below).
To lower the monitor, press the Monitor Release button and pull the monitor down.
It will drop freely to 45º.
To lower the monitor further, continue pulling down and the internal mechanism
will permit further movement and will hold the monitor in the position in which you
leave it.
To turn the monitor on, press and hold the POWER button for two seconds. When
the power is ON, if an input signal is present, the picture will bedisplayed on the
screen. If no signal is present, the monitor will display the message "NO SIGNAL."
If you know a video input signal is present but the monitor displays "NO SIGNAL,"
be sure to try pressing the AV SELECT button to see if your input source is connected
to the other AV input.
To adjust the monitor image, press MENU to access the various adjustment controls
such as BRIGHTNESS and CONTRAST. Use the +/- buttons to adjust each parameter
until you are satisfied with the picture quality.
This monitor features separate ON/OFF buttons for the right and left dome lights,
so that if you need not disturb a sleeping companion if you need overhead illumination.
The dome lights turn on when you open a door. To turn on or off the dome lights
manually, simply press the round button near the right dome light.
To turn the dome lights on or off manually, simply press the round button on the
side you wish the light to turn on.
To avoid accidental damage, we suggest you always close the monitor assembly
when it is not in use. To do so, rotate the monitor back to a 0º left-to-right position,
and push it up into the monitor base until you hear a “click.” Test that it is secured
by gently pulling down on monitor frame.
On a towel or soft cloth, gently place the monitor assembly “face down” on a stable
worksurface.
Using the wires provided, complete the audio, videoand power connections in
your vehicleas shown in the diagram below.
VIDEO INPUT 1
VIDEO INPUT 2
POWER
RED
BLACK
FUSE
to +12 VDC Battery
to Chassis Ground
VIDEO SOURCE 1
(DVD player, video game, etc.)
VIDEO SOURCE 2
(DVD player, video game, etc.)
DOME LIGHTS
RED
BLACK
BLUE
WHITE
Car dome lamp (+)
Car dome lamp (-)
to +12 VDC Battery
to Chassis Ground
On a towel or soft cloth, gently place the monitor assembly “face down” on a stable
worksurface.
Using the wires provided, complete the audio, videoand power connections in
your vehicleas shown in the diagram below.
DOME LIGHTS
RED
BLACK
BLUE
WHITE
Car dome lamp (+)
Car dome lamp (-)
to +12 VDC Battery
to Chassis Ground
Troubleshooting
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 13
Specifications
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 14
Monitor Controls and Features:
BV7.3FLIP • BV7IRF • BV8WFLIP • BV8IRF
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 4
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 3
Features What is included?
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 2
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 1
General precautions
Safety precautions
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 9
Remote Control:
BV7.3FLIP
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 6
Monitor Controls and Features: BV8FL
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 5
Remote Control:
BV7IRF • BV8FL • BV8IRF • BV8WFLIP
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 10 BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 11 BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 12
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 8
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 8
CONTENTS
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - Contents
U S E R ’ S M A N U A L
Release button
Battery
If you experience operation or performance problems with this product, compare your
installation with the electrical wiringdiagram on the previous page. If problems persist,
read the following troubleshooting tips which may help eliminate the problems.
When first unpacking your new flip-
down monitor, please check first that
the package contains all of the items
below. If something is missing, contact
the store where you purchased the
player.
• LCDmonitor housing
• Wireless remote control with
batteries
• RCA-RCA video cable
• Power cable
(BV7.3FLIP, BV8FL and BV8WFLIP)
(red/black with inline fuse and 2-pin
connector)
-or-
• Power/AV cable
(BV.3IRF and BV8IRF)
(red/black with inline fuse and 2-pin
connector, plus stereo RCA audio/RCA
video inputs for each of two channels))
• Dome light cable
(blue/red/white/black with 4-pin connector)
• Metal mounting plate
• (4) black 1/2" sheet metal screws
(for attaching mounting plate to car roof)
• (4) silver 1" machine screws
(for attaching monitor to mounting plate)
• Do not operate this equipment while
driving – safe driving should always
be your highest priority.
• This product should not be installed
in a location which allows the monitor
screen to be visible to the driver of the
vehicle. In some states and countries,
the viewing of images on a screeen
inside a vehicle is illegal, even by
people other than the driver. Be sure
that the installation and operation of
this system is in compliance with local
rules and regulations.
• If you have installed the monitor in a
position where it is visible to the driver,
be sure to installa Safety Cord. Wire
this cord to an accessory wirewhich
has +12v power when the ignition is
switched on. This will prevent the
operaton of the monitor when the
engine is running.
• Do not open or attempt to repair this
unit yourself. Dangerous high voltages
are present which may result in electric
shock. Refer any repairs to a qualified
service technician.
• Do not attempt to repair a damaged,
broken or faulty powercord. Replace
it with a new one immediately.
• To avoid risk of electronic shock or
damage to the monitor, donot permit
any of this equipment to become damp
or wet from water or drinks. If this does
occur, immediately unplug the power
cord and send the monitor to your
local dealer or service center as soon
as possible.
• if there is smoke or any peculiar odor
present during useor if there is damage
to any of the componentenclosures,
immediately unplug the power cord
and send the monitor to your local
dealer or service center as soon as
possible .
If you do not know how to install the
Safety Cord, please consult with a
mobile video installer in your area, and
have this work completed properly
before operating the video system.
Models BV7.3IRF and BV8IRF also
feature:
• Built-in wireless infrared audio
transmitter (for use with infrared
headphones, model HP-10)
TheBV7.3IRF and BV8IRF monitors include a wireless infrared transmitter. The
transmittersends a high-quality stereo signal which can be received by a pair of
Boss HP-10 wireless infrared headphones.
Theinfrared signal is emitted from the large dark lens on the front of the monitor
console. Best sound will be obtained if you sit directly in front of the monitorwithin
about six feet. If you choose to sit to one side of the monitor, you can expect good
reception within 35º to the right or left of the monitor.
Infrared Audio Transmission (BV7.3IRF and BV8IRF only)
The remote battery isheld in a small “drawer” on one edgeof the remote. To open
this drawer, press and hold the small button on the edgeof this drawer (as shown
below) and slide the drawer out.
Insert a new battery and push the drawer back fully into the remote.
Changing the battery in the remote control
35º
35º
1General precautions
1Safety precautions
2Installation precautions
2Operating precautions
3Features
3What is included?
4MonitorControls and Features:
BV7.3FLIP •BV7IRF • BV8FL • BV8IRF
5MonitorControls and Features:
BV8WFLIP
6Remote control: BV7.3FLIP
7Remote control:
BV7IRF • BV8FL • BV8IRF • BV8WFLIP
8Systemwiring
9Monitor installation
10 Releasing and opening the monitor
11 Powering up the monitor
11 Turning on thedome lights
12 Infrared audio transmission
BV7IRF • BV8IRF
12 Remote control battery replacement
13 Troubleshooting
14 Specifications
Congratulations on your purchase
of a Video Monitor.
It has been designed, engineered
and manufactured to bring you the
highest level of performance and
quality, and will afford you years of
viewing pleasure.
Thank you for making your
choice for car video entertainment!
A/V SYSTEM
Screen size
Screen format
Video Compatability
LCD panel type
Resolution, pixels
Brightness
A/V Inputs
GENERAL
Power requirements
Power consumption
Dimensions(L x W x H)
All specifications subject to change without notice.
MODEL
8"
16:9
NTSC/PAL Auto
Active Matrix TFT
1152 x 234
400 NITS
Video 2EA
12V DC
3W
2.8MHz/2.3MHz
12V DC
9W
9.8"x 9.5" x 1.6"
page
BV7.3FLIP
7.3" Flip Down Widescreen TFT Monitor
BV7.3IRF
7.3" Flip Down Widescreen TFT Monitor
with Built-In Infrared Audio Transmitter
BV8FL
8" Flip Down TFT Monitor
BV8WFLIP
8" Flip Down Widescreen TFT Monitor
BV8IRF
8" Flip Down Widescreen TFT Monitor
with Built-In Infrared Audio Transmitter
SYMPTOM CAUSE REMEDY
1/2" black self tapping
sheet metal screws
1" silver finish
threaded machine
screws
Press the monitor
release button
Pull the monitor screen
down to the desired angle
YELLOW
RED
WHITE
YELLOW
RED
WHITE

Thread all the wires through the
round hole in the center of the
mounting plate.
Install the monitor onto the
mounting plate, using the four
screws provided.
Using the four black self-tapping
screws provided, attach the monitor
mounting plate by screwing through
the headliner and into the existing
roof supports or the wood bracket
you made (see TIP below).
To lower the monitor, press the Monitor Release button and pull the monitor down.
It will drop freely to 45º.
To lower the monitor further, continue pulling down and the internal mechanism
will permit further movement and will hold the monitor in the position in which you
leave it.
To turn the monitor on, press and hold the POWER button for two seconds. When
the power is ON, if an input signal is present, the picture will bedisplayed on the
screen. If no signal is present, the monitor will display the message "NO SIGNAL."
If you know a video input signal is present but the monitor displays "NO SIGNAL,"
be sure to try pressing the AV SELECT button to see if your input source is connected
to the other AV input.
To adjust the monitor image, press MENU to access the various adjustment controls
such as BRIGHTNESS and CONTRAST. Use the +/- buttons to adjust each parameter
until you are satisfied with the picture quality.
This monitor features separate ON/OFF buttons for the right and left dome lights,
so that if you need not disturb a sleeping companion if you need overhead illumination.
The dome lights turn on when you open a door. To turn on or off the dome lights
manually, simply press the round button near the right dome light.
To turn the dome lights on or off manually, simply press the round button on the
side you wish the light to turn on.
To avoid accidental damage, we suggest you always close the monitor assembly
when it is not in use. To do so, rotate the monitor back to a 0º left-to-right position,
and push it up into the monitor base until you hear a “click.” Test that it is secured
by gently pulling down on monitor frame.
On a towel or soft cloth, gently place the monitor assembly “face down” on a stable
worksurface.
Using the wires provided, complete the audio, videoand power connections in
your vehicleas shown in the diagram below.
VIDEO INPUT 1
VIDEO INPUT 2
POWER
RED
BLACK
FUSE
to +12 VDC Battery
to Chassis Ground
VIDEO SOURCE 1
(DVD player, video game, etc.)
VIDEO SOURCE 2
(DVD player, video game, etc.)
DOME LIGHTS
RED
BLACK
BLUE
WHITE
Car dome lamp (+)
Car dome lamp (-)
to +12 VDC Battery
to Chassis Ground
On a towel or soft cloth, gently place the monitor assembly “face down” on a stable
worksurface.
Using the wires provided, complete the audio, videoand power connections in
your vehicleas shown in the diagram below.
DOME LIGHTS
RED
BLACK
BLUE
WHITE
Car dome lamp (+)
Car dome lamp (-)
to +12 VDC Battery
to Chassis Ground
Troubleshooting
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 13
Specifications
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 14
Monitor Controls and Features:
BV7.3FLIP • BV7IRF • BV8WFLIP • BV8IRF
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 4
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 3
Features What is included?
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 2
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 1
General precautions
Safety precautions
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 9
Remote Control:
BV7.3FLIP
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 6
Monitor Controls and Features: BV8FL
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 5
Remote Control:
BV7IRF • BV8FL • BV8IRF • BV8WFLIP
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 10 BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 11 BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 12
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 8
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 8
CONTENTS
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - Contents
U S E R ’ S M A N U A L
If you experience operation or performance problems with this product, compare your
installation with the electrical wiringdiagram on the previous page. If problems persist,
read the following troubleshooting tips which may help eliminate the problems.
No picture or
sound.
Power cord is not
properly connected.
A/V input cables not
properly connected.
A/V input source is not
operating properly.
Check that power connections
are properly made and all fuses
are in functioning condition.
Check all cables.
Replace or repair A/V source
(DVD player, video game, etc.)
When first unpacking your new flip-
down monitor, please check first that
the package contains all of the items
below. If something is missing, contact
the store where you purchased the
player.
• LCDmonitor housing
• Wireless remote control with
batteries
• RCA-RCA video cable
• Power cable
(BV7.3FLIP, BV8FL and BV8WFLIP)
(red/black with inline fuse and 2-pin
connector)
-or-
• Power/AV cable
(BV.3IRF and BV8IRF)
(red/black with inline fuse and 2-pin
connector, plus stereo RCA audio/RCA
video inputs for each of two channels))
• Dome light cable
(blue/red/white/black with 4-pin connector)
• Metal mounting plate
• (4) black 1/2" sheet metal screws
(for attaching mounting plate to car roof)
• (4) silver 1" machine screws
(for attaching monitor to mounting plate)
No picture. A/V signal not present.
Contrast and/or
brightness is set
improperly.
TV reception is poor
(applies to system with TV
tuner only)
Check all cables. If necessary,
repair or replace A/V source.
Adjust contrast and brightness
levels to see if picture appears.
Check and adjust antenna
system. Move to another area
with better reception, if
possible.
Remote control
does not function
properly.
Batteries are dead.
Remote is not being used
in direct line-of-sight with
the player or remote IR
sensor. Transmission is
best within 6 feet/30º
angle of IR sensor on
monitorfront panel, and
within .
Replace batteries.
Be sure when being used, the
remote is being pointed directly
toward the player or remote IR
sensor (if installed).
• Do not operate this equipment while
driving – safe driving should always
be your highest priority.
• This product should not be installed
in a location which allows the monitor
screen to be visible to the driver of the
vehicle. In some states and countries,
the viewing of images on a screeen
inside a vehicle is illegal, even by
people other than the driver. Be sure
that the installation and operation of
this system is in compliance with local
rules and regulations.
• If you have installed the monitor in a
position where it is visible to the driver,
be sure to installa Safety Cord. Wire
this cord to an accessory wirewhich
has +12v power when the ignition is
switched on. This will prevent the
operaton of the monitor when the
engine is running.
• Do not open or attempt to repair this
unit yourself. Dangerous high voltages
are present which may result in electric
shock. Refer any repairs to a qualified
service technician.
• Do not attempt to repair a damaged,
broken or faulty powercord. Replace
it with a new one immediately.
• To avoid risk of electronic shock or
damage to the monitor, donot permit
any of this equipment to become damp
or wet from water or drinks. If this does
occur, immediately unplug the power
cord and send the monitor to your
local dealer or service center as soon
as possible.
• if there is smoke or any peculiar odor
present during useor if there is damage
to any of the componentenclosures,
immediately unplug the power cord
and send the monitor to your local
dealer or service center as soon as
possible .
If you do not know how to install the
Safety Cord, please consult with a
mobile video installer in your area, and
have this work completed properly
before operating the video system.
Models BV7.3IRF and BV8IRF also
feature:
• Built-in wireless infrared audio
transmitter (for use with infrared
headphones, model HP-10)
1General precautions
1Safety precautions
2Installation precautions
2Operating precautions
3Features
3What is included?
4MonitorControls and Features:
BV7.3FLIP •BV7IRF • BV8FL • BV8IRF
5MonitorControls and Features:
BV8WFLIP
6Remote control: BV7.3FLIP
7Remote control:
BV7IRF • BV8FL • BV8IRF • BV8WFLIP
8Systemwiring
9Monitor installation
10 Releasing and opening the monitor
11 Powering up the monitor
11 Turning on thedome lights
12 Infrared audio transmission
BV7IRF • BV8IRF
12 Remote control battery replacement
13 Troubleshooting
14 Specifications
Congratulations on your purchase
of a Video Monitor.
It has been designed, engineered
and manufactured to bring you the
highest level of performance and
quality, and will afford you years of
viewing pleasure.
Thank you for making your
choice for car video entertainment!
A/V SYSTEM
Screen size
Screen format
Video Compatability
LCD panel type
Resolution, pixels
Brightness
A/V Inputs
GENERAL
Power requirements
Power consumption
Dimensions(L x W x H)
All specifications subject to change without notice.
MODEL
8"
16:9
NTSC/PAL Auto
Active Matrix TFT
1152 x 234
400 NITS
Video 2EA
12V DC
3W
2.8MHz/2.3MHz
12V DC
9W
9.8"x 9.5" x 1.6"
page
BV7.3FLIP
7.3" Flip Down Widescreen TFT Monitor
BV7.3IRF
7.3" Flip Down Widescreen TFT Monitor
with Built-In Infrared Audio Transmitter
BV8FL
8" Flip Down TFT Monitor
BV8WFLIP
8" Flip Down Widescreen TFT Monitor
BV8IRF
8" Flip Down Widescreen TFT Monitor
with Built-In Infrared Audio Transmitter
SYMPTOM CAUSE REMEDY
1/2" black self tapping
sheet metal screws
1" silver finish
threaded machine
screws
Press the monitor
release button
Pull the monitor screen
down to the desired angle
YELLOW
RED
WHITE
YELLOW
RED
WHITE

Thread all the wires through the
round hole in the center of the
mounting plate.
Install the monitor onto the
mounting plate, using the four
screws provided.
Using the four black self-tapping
screws provided, attach the monitor
mounting plate by screwing through
the headliner and into the existing
roof supports or the wood bracket
you made (see TIP below).
To lower the monitor, press the Monitor Release button and pull the monitor down.
It will drop freely to 45º.
To lower the monitor further, continue pulling down and the internal mechanism
will permit further movement and will hold the monitor in the position in which you
leave it.
To turn the monitor on, press and hold the POWER button for two seconds. When
the power is ON, if an input signal is present, the picture will bedisplayed on the
screen. If no signal is present, the monitor will display the message "NO SIGNAL."
If you know a video input signal is present but the monitor displays "NO SIGNAL,"
be sure to try pressing the AV SELECT button to see if your input source is connected
to the other AV input.
To adjust the monitor image, press MENU to access the various adjustment controls
such as BRIGHTNESS and CONTRAST. Use the +/- buttons to adjust each parameter
until you are satisfied with the picture quality.
This monitor features separate ON/OFF buttons for the right and left dome lights,
so that if you need not disturb a sleeping companion if you need overhead illumination.
The dome lights turn on when you open a door. To turn on or off the dome lights
manually, simply press the round button near the right dome light.
To turn the dome lights on or off manually, simply press the round button on the
side you wish the light to turn on.
To avoid accidental damage, we suggest you always close the monitor assembly
when it is not in use. To do so, rotate the monitor back to a 0º left-to-right position,
and push it up into the monitor base until you hear a “click.” Test that it is secured
by gently pulling down on monitor frame.
On a towel or soft cloth, gently place the monitor assembly “face down” on a stable
worksurface.
Using the wires provided, complete the audio, videoand power connections in
your vehicleas shown in the diagram below.
VIDEO INPUT 1
VIDEO INPUT 2
POWER
RED
BLACK
FUSE
to +12 VDC Battery
to Chassis Ground
VIDEO SOURCE 1
(DVD player, video game, etc.)
VIDEO SOURCE 2
(DVD player, video game, etc.)
DOME LIGHTS
RED
BLACK
BLUE
WHITE
Car dome lamp (+)
Car dome lamp (-)
to +12 VDC Battery
to Chassis Ground
On a towel or soft cloth, gently place the monitor assembly “face down” on a stable
worksurface.
Using the wires provided, complete the audio, videoand power connections in
your vehicleas shown in the diagram below.
DOME LIGHTS
RED
BLACK
BLUE
WHITE
Car dome lamp (+)
Car dome lamp (-)
to +12 VDC Battery
to Chassis Ground
Troubleshooting
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 13
Specifications
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 14
Monitor Controls and Features:
BV7.3FLIP • BV7IRF • BV8WFLIP • BV8IRF
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 4
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 3
Features What is included?
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 2
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 1
General precautions
Safety precautions
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 9
Remote Control:
BV7.3FLIP
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 6
Monitor Controls and Features: BV8FL
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 5
Remote Control:
BV7IRF • BV8FL • BV8IRF • BV8WFLIP
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 10 BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 11 BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 12
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 8
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - page 8
CONTENTS
BV7.3FLIP • BV7.31RF • BV8FL • BV8WFLIP • BV8IRF User’s Manual - Contents
U S E R ’ S M A N U A L
If you experience operation or performance problems with this product, compare your
installation with the electrical wiring diagram on the previous page. If problems persist,
read the following troubleshooting tips which may help eliminate the problems.
When first unpacking your new flip-
down monitor, please check first that
the package contains all of the items
below. If something is missing, contact
the store where you purchased the
player.
• LCDmonitor housing
• Wireless remote control with
batteries
• RCA-RCA video cable
• Power cable
(BV7.3FLIP, BV8FL and BV8WFLIP)
(red/black with inline fuse and 2-pin
connector)
-or-
• Power/AV cable
(BV.3IRF and BV8IRF)
(red/black with inline fuse and 2-pin
connector, plus stereo RCA audio/RCA
video inputs for each of two channels))
• Dome light cable
(blue/red/white/black with 4-pin connector)
• Metal mounting plate
• (4) black 1/2" sheet metal screws
(for attaching mounting plate to car roof)
• (4) silver 1" machine screws
(for attaching monitor to mounting plate)
• Do not operate this equipment while
driving – safe driving should always
be your highest priority.
• This product should not be installed
in a location which allows the monitor
screen to be visible to the driver of the
vehicle. In some states and countries,
the viewing of images on a screeen
inside a vehicle is illegal, even by
people other than the driver. Be sure
that the installation and operation of
this system is in compliance with local
rules and regulations.
• If you have installed the monitor in a
position where it is visible to the driver,
be sure to installa Safety Cord. Wire
this cord to an accessory wirewhich
has +12v power when the ignition is
switched on. This will prevent the
operaton of the monitor when the
engine is running.
• Do not open or attempt to repair this
unit yourself. Dangerous high voltages
are present which may result in electric
shock. Refer any repairs to a qualified
service technician.
• Do not attempt to repair a damaged,
broken or faulty powercord. Replace
it with a new one immediately.
• To avoid risk of electronic shock or
damage to the monitor, donot permit
any of this equipment to become damp
or wet from water or drinks. If this does
occur, immediately unplug the power
cord and send the monitor to your
local dealer or service center as soon
as possible.
• if there is smoke or any peculiar odor
present during useor if there is damage
to any of the componentenclosures,
immediately unplug the power cord
and send the monitor to your local
dealer or service center as soon as
possible .
If you do not know how to install the
Safety Cord, please consult with a
mobile video installer in your area, and
have this work completed properly
before operating the video system.
Models BV7.3IRF and BV8IRF also
feature:
• Built-in wireless infrared audio
transmitter (for use with infrared
headphones, model HP-10)
1General precautions
1Safety precautions
2Installation precautions
2Operating precautions
3Features
3What is included?
4MonitorControls and Features:
BV7.3FLIP •BV7IRF • BV8FL • BV8IRF
5MonitorControls and Features:
BV8WFLIP
6Remote control: BV7.3FLIP
7Remote control:
BV7IRF • BV8FL • BV8IRF • BV8WFLIP
8Systemwiring
9Monitor installation
10 Releasing and opening the monitor
11 Powering up the monitor
11 Turning on thedome lights
12 Infrared audio transmission
BV7IRF • BV8IRF
12 Remote control battery replacement
13 Troubleshooting
14 Specifications
Congratulations on your purchase
of a Video Monitor.
It has been designed, engineered
and manufactured to bring you the
highest level of performance and
quality, and will afford you years of
viewing pleasure.
Thank you for making your
choice for car video entertainment!
A/V SYSTEM
Screen size
Screen format
Video Compatability
LCD panel type
Resolution, pixels
Brightness
A/V Inputs
GENERAL
Power requirements
Power consumption
Dimensions(L x W x H)
7.3"
16:9
NTSC
Active Matrix TFT
1152 x 234
400 NITS
Video 2EA
12V DC
9W
9.8"x 9.5" x 1.6"
BV7.3FLIP
7.3" Widescreen
Flip DownTFT Monitor
All specifications subject to change without notice.
MODEL
8"
16:9
NTSC/PAL auto
Active Matrix TFT
1152 x 234
400 NITS
Video 2EA
12V DC
6W
9.8"x 9.5" x 1.6"
BV8WFLIP
8" Flip Down
Widescreen TFT Monitor
8"
4:3
NTSC/PAL Auto
Active Matrix TFT
1152 x 234
400 NITS
Video 2EA
12V DC
6W
10.5" x 8.9" x 1.9"
BV8FL
8" Flip Down
TFT Monitor
A/V SYSTEM
Screen size
Screen format
Video Compatability
LCD panel type
Resolution, pixels
Brightness
A/V Inputs
INFRARED AUDIO
Power requirements
Power consumption
Transmitter freq. (R/L)
GENERAL
Power requirements
Power consumption
Dimensions(L x W x H)
7.3"
16:9
NTSC
Active Matrix TFT
1152 x 234
400 NITS
Video 2EA
12V DC
3W
2.8MHz/2.3MHz
12V DC
9W
9.8"x 9.5" x 1.6"
BV7.3IRF
7.3" Flip Down Widescreen
TFT Monitor with Built-In
IR Audio Transmitter
MODELBV8IRF
8" Flip Down Widescreen
TFT Monitor with Built-In IR
Audio Transmitter
8"
16:9
NTSC/PAL Auto
Active Matrix TFT
1152 x 234
400 NITS
Video 2EA
12V DC
3W
2.8MHz/2.3MHz
12V DC
9W
9.8"x 9.5" x 1.6"
page
BV7.3FLIP
7.3" Flip Down Widescreen TFT Monitor
BV7.3IRF
7.3" Flip Down Widescreen TFT Monitor
with Built-In Infrared Audio Transmitter
BV8FL
8" Flip Down TFT Monitor
BV8WFLIP
8" Flip Down Widescreen TFT Monitor
BV8IRF
8" Flip Down Widescreen TFT Monitor
with Built-In Infrared Audio Transmitter
SYMPTOM CAUSE REMEDY
1/2" black self tapping
sheet metal screws
1" silver finish
threaded machine
screws
Press the monitor
release button
Pull the monitor screen
down to the desired angle
YELLOW
RED
WHITE
YELLOW
RED
WHITE