Boss Audio Systems BV9997BI User manual

00
2
Contents
Installation
Wiring Connections 12
Installing the Unit 13
Detach the Unit 14
Installing the Front Panel 15
Detach the Front Panel 15
2
1Before You Start
Important Safeguards 4
About this manual 4
Precautions 5
Maintenance 6
Location & function of the controls 7
Remote control 9
Specifications 11
1
5Main Menu
Main Menu Setup 18
Video Adjustment 18
Audio Adjustment 18
Time Adjustment 19
4
DISC/VCD/MP4
5
5
DISC/VCD/MP4 Setup 23
DISC/VCD/MP4 Operation 23
Selecting Tracks 23
Number Buttons 23
Pause the Playback 23
Stop the Playback 23
Play tracks at Random 24
Repeat Playing 24
Skip backward/forward/
24
System Switch 24
Slow Motion Playback 24
Increase Picture Size 24
On Screen Display 24
Setting the Playback Time 25
Changing Audio Language 25
Changing the Subtitle Language 25
Changing the Viewing Angle 26
Selecting Channel 26
Program Playing 26
Playing PBC(Menu) 26
Selecting Menu 27
DISC Setup Menu 27
F.F/F.REW the
Playback
6CD/MP3/SD/USB
CD/MP3/SD/USB Setup
CD/MP3/SD/USB Operation
Selecting Tracks
Repeat Playing
Number Buttons
Selecting Track
Stop Play
Playing Tracks at Random
Pause the Playback
Skip backwafd/forward/F.F/F.REW
the Playback
34
34
35
35
35
35
35
35
36
36
Common Operations
3
To Select Source by Menu 16
Reset the Unit 16
Turning the Unit On/Off 16
Volume Control 16
Setting the Sound Characteristics 16
Adjust the Angle 16
EQ Setting 17
Turning Loudness On/Off 17
Insert a SD Card 17
Eject a Dise 17
Mute Function 17
Mode Selector 17
Infrared Sensor 17
Double Function 17
Screen Adjustment 19
System 19

Simple Troubleshooting Guide 46
AUX Touch Screen Menu 40
00
3
Contents
On Screen Display
Program Playing
Eject a SD Card
Eject an USB
35
35
35
35
AUX
8
11
7Tuner
Listening to the Radio 37
Band Selector 37
Selecting The stored Station 37
Manual/Automatic Tuning 37
DX/LOC Selector 37
MO/ST Selector 38
Goto FREQ 38
AMS 38
Number Buttons 38
RDS Setup 39
39
39
36
Alternative Frequencies
Traffic Alarm
Program Type
Bluetooth Mode
9
Additional Information
IPOD
IPOD Operation
Selecting Tracks
Repeat Playing
Playing Tracks at Random
Pause the Playback
44
44
Fast Forward/Fast Reverse 44
44
44
45
File Selector 45
Eject IPOD 45
10
Additional Information
46
11
Bluetooth Operational Interface 41
Using a Bluetooth Wireless connection 41
Pairing Your Unit and Bluetooth Phone 41
Pairing in Handsfree Mode 41
Cellphone Pairing Mode 41
Bluetooth Connection and DVDonnection 42
Using the Unit as a Handsfree Device 42
Last Number Dialing 42
To Dial by Cellphone 42
To Dial by the Unit 43
Using the Unit as Bluetooth Music 43
Audio Transfer between The Unit and
Phone 43
Common Symptoms Cause Solution
There is nopower.
The car ignitionis
switched off
If the powersupply is properlyconnected to
the car accessory, switch theignition key to
ON orACC.
The fuse hasblown. Replace with sameamperatge fuse rate.
The disc cannot
be loaded.
There is anotherdisc inside
the player Remove the discfrom the player
The device doesnot
work correctly
(EJECT,LOAD,
PLAY)
Inserted disc isupside down Insert the compactdisc with thelabel facing
upward
The surface ofdisc is extre-
mely dirty,Scrached or
damaged.
Clean the discor try anotherdisc,if the new
disc works correctly,the first discis damaged.
Temperatureinside the caris
too high.
Cool off untilthe ambient temperaturereturns
to normal.
There is nosound.
The volume controlis set too
low. Turn up thevolume properly.
The device hasnot been wired
correctly.
Check the connections according to
the wiring diagram.
The operation keys
do not work
1. The built-inmicroprocessor
is not operatingproperly.
2. Front panelis not properly
attached into itsplace
1. Switch thedevice off andon again orpress
the RESET button.
2. Remove andreinstall the frontpanel.
The sound ofthe
disc player skips
The installation angleis more
than30 degrees
The surface ofthe road is
uneven.
The surface ofdisc is extremely
dirty,scrached ordamaged.
Adjust the installation angle to less than 30
degrees
Wait until theroad becomes smoother before
playing the disc.
Clean the discor try anotherdisc, if thenew
disc works correctly, the firstdisc is damaged.
No radio reception. The antenna cable is not
connected.
Insert the antennacable firmly intothe antenna
socket of theunit.
In automatic search
mode the radiodoes
not stop ata trans-
mitting station.
The transmission signalsare
too weak. Tune in toa radio stationmanually.

10
Before You Start
IMPORTANT SAFEGUARDS About this manual
During IPOD mode, press to select
video or audio. Video and picture can be
played at this time.
The unit and the remote control can not be
operated in this mode, you can just operate
IPOD to select video and picture.
Video or Picture Mode
* This function is operated by using the touch
screen only.
* The IPOD TV should be set ON in this
function.
Note:
VIDEO
Note:
During IPOD mode, press on the monitor
to go back to the previous catalog.
File Selector
Press on the monitor to select the previous
5 tracks, press to select the next 5 tracks
(show as in the right of the picture).
MENU
* Video playback requires Gen 5.5 or earlier
Photo or Video iPod. iPod Touch, iPod Cl-
assic, and iPod Nano with video will only
play music files.
* This function is operated by using the touch
screen only.
45
IPOD
Playlist
Artist
Album
Genre
Track
If the iPod is removed during iPod mode, the
unit will automatically switch to radio mode.
Eject IPOD
This unit features a number of sophisti-
cated functions ensuring superior
operation. All the functions have been
designed for the easiest possible use,
but many are not self-explanatory. This
manual will help you understand the
functions and operations of the unit.
DISC/VCD/CD/MP3/MP4/SD operation
that can only be operated by the remote
control, but there are also functions that
can be operated by the buttons provided
for the main unit.
Be sure to connect the color coded wires
according to the diagram. Incorrect con-
nections may cause the unit to malfunct-
,
ion or damage the vehicle s electrical sy-
stem.
1
Be sure to connect the speaker (-) wires
to the speaker (-) terminal. Never conn-
ect the left and right channel speaker c-
ables each other or to the vehicle body.
2
Make sure all the connections are comp-
letely correct before turning on your unit.
3
When replacing the fuse(s), the replace-
ment must be of the same amperage as
shown on the fuse holder.
4
Do not block vents or radiator panels.
Blocking them will cause heat to build up
inside and may result in fire.
5
To lessen the driver's distraction, install
the unit in an appropriate place.
6
Power the unit on after starting the engine
otherwise it will shut off due to lack of
power.
7
Do not place the remote control in a place
susceptible to high temperature or direct
sunlight. Doing so will damage the remote.
8
Do not use the unit in
extremely high or
low temperatures. Also avoid high humidity
and direct sunlight.
9
Take care of the magnetism of the unit.
Do no put the credit card, cassette or w-
atch around the unit.
10
To minimize disturbance of the video
frequency, keep far away from the unit
when using your phone.
11

01
5
Before You Start
44
10
Press and hold or to play the track
fast forward or fast rewind . Do it again or
press ENTER to resume to play normally.
Playing Track F.F/F.REW
20
Repeat Playing
During playback, press
Press it again to
cancel this function.
RPT to track
repeat, DISC repeat, off.
* This function is operated by using the remote
control only.
15
Note:
Playing Tracks at Random
During IPOD playback, when
RDM button, Shuffle off,
pressing
Shuffle Track,
Shuffle Album will be activated.
16
Note:
* This function is operated by using the remote
control only.
Switch
During playback, press to turn to
IPOD, the screen shows: Play video on your
iPod. Then touch screen to return. Then
you can operate your iPod. Press again
to return to main unit operation.
VIDEO
VIDEO
Note:
* This function is operated by using the touch
screen only.
IPOD Operation
MENU Back to the previous menu
Briefly press to play previous track,
press and hold to fast forward.
Play/ pause
VIDEO Mode switch between IPOD and
main unit
SRC Mode switch
Briefly press to play next track,
press and hold to fast rewind.
Selecting Tracks
* Pressing / on the monitor to performs
the same function
Note:
During IPOD playback, press to
return to the beginning of the current track,
press again within 3 seconds to play
previous track ,press to play next track .
21
21
21
* Pressing and holding / on the monitor
also performs the same function
Note:
Pause the Playback
During IPOD mode, press button to
pause the playback, Press it again to return
to normal playback.
Press on the monitor or briefly press
SEARCH+/- on the head unit also performs
the same function.
Note:
*
27
8/97
DISCo-yeye
00:02:47
IPOD
8/97
DISCo-yeye
00:02:47
BLUET Press the button to enter into bluetooth
mode
During IPOD playback, connect the IPOD
wire (5V) to the one in backside of the main
unit. When the iPod is loaded, the unit will
play a track. To go back to the source status,
press iPod to enter into iPod setup:
When driving, do not attempt to
modify the unit. Modifying the
unit may cause an accident.
Stop the vehicle before carrying
out any operation that could
interfere with your driving.
Do not turn the unit on in extre-
mely high or low temperature.
Be sure the temperature inside
the vehicle is between +60 C
and -10 C before turning on your
unit .
To enjoy optimum sound and
images while playing, handle the
DISCs as follows:
PRECAUTIONS
This unit can play the following DISCs only:
Type of disc
VCD
MP3
CD
NOTE: The unit is compatible with VCD1.0/2.0/3.0 version and DVCD disc.
DISC
Recorded material
Sound and moving pictures
Sound and moving pictures
Sound only
Sound only
Size of disc
MPEG-4
Sound and moving pictures

43
Before You Start
01
6
09
Bluetooth
To Dial by the Unit
When cellphone is connected, press to
input the call number, then press
to dial. DIAL OK will appear. When the call
is picked up, PICKED UP appears.
23
Note:
* Press CLEAR on the remote control or
in the monitor to delete wrong inputs.
22
30
* Pressing in the monitor also performs the
same function.
Audio Transfer between the Unit
and Phone
Press to change the conversation from
the unit to the cellphone.
Note:
* The function might cause the bluetooth to be
disconnected for some phones. If this happens,
press the button while on the call to be
paired back automatically.
6
6
8
Using the Unit as Bluetooth
Music
During bluetooth mode, the music on the
cellphone
To select music fast: press to play
the previous track, press to play the next
one.
Pause play: press to pause play.
Stop play: press to stop play, and
press the PLAY to return to the beginning
of the current track.
will play through the unit.
21
Note:
17
18
* This function is only valid on the remote control.
Replacing the Fuse
Makesuretheamperagematchesthe
specifiedvaluewhenreplacingthefu-
ses.Ifthefuseisblown,
Ifthesame
problemoccurs,itwouldbesubjected
tothemalfunction.Insuchcases,
pleaseconsulttothenearestservice
dealer.
replaceitwith
anewone.Besureyouareusingone
withthecorrectrating.
Whentherangeoftheoperationof
the remotecontrolbecomesshort
orstopsoperating,Replacethebattery.
BesuertousealithiumBatterybutton
CellCr2025.
Precautions on Using Lithium
Battery
Always keep the lithium battery beyond
children s reach. In case
swallowed, see a doctor immediately.
Cleaning the battery with a dry cloth,
to ensure its perfect connected.
Install the battery with the proper polarity.
To prevent short circuit, do not use
metal tweezer to handly the battery.
Gently pull out the Battery Holder while
pressing the Stopper.
Put the button-type battery with mark(+)
upward into the Battery Holder.
Replacing the Remote Battery
Insert the Battery Holder into the Remote
Control.
!
Maintenance
Warning
Neverusethefusewiththerated
amperagemorethanthatsuppliedto
yourunit,otherwiseitwilldamagethe
unit.
Warning!
Improperhandlewiththebatterymay
leadtoexplosion.
Itcannotbecharged,disassembledor
thrownintoafire.
!

01
7
Before You Start
42
Location of the Controls
09
5
8
14
1
72
15
17
3
4
11
13
12 1810
16
19
Bluetooth
Cellphone Pairing Mode
1. Browse your cellphone menu and find
the connectivity or Bluetooth connection
section.
2. Select search for a new handsfree device
function and allow the phone to find the
mobile.
(Different cell phones have different blue-
tooth menus, please refer to your phone
manual.)
3. When CAR A/V DEVICE appears, select
this item.
( if it can not be connected, please refer
to mobile manual, and connect it again.)
4. To input the password, the password is:
1234.
5. Press the connect with the Handsfree
option on your cellphone, CONNECT
appears.
Bluetooth Connection and
Disconnection
When you established a bluetooth connection
between this unit and the cellphone, the blue-
tooth icon on the display appears in red.
Press PAIR to turn off bluetooth connec-
tion, and appears in blue.
Press , PAIR SUCCESS will appear on
the display. When the bluetooth is connected,
the display will show CONNECT. When the
Bluetooth is disconnected, the display will
show PAIRING TIME OUT.
29
29
Note:
* Make sure the phone battery has good power.
If not, the connection quality may be affected.
* To ensure connection succeed
----Please selete menus of cellphone with bluetooth.
----Please reset the unit and cellphone.
----Please reset every step of pairing.
* Disconnect after paring
----Please pair the phone manually.
For example: pairing fixture cellphone connect.
To Dial by Cellphone
1.
2. When you receive a call, PICK UP appears
on the display.
When you make a call by cell phone, the
unit will automatically be activated. DIAL
OK will appear on the display.
Using the Unit as a Handsfree
Device
When the unit is ringing,
.
To accept call: Press to answer a call,
To reject call: Press to reject a call,
.
To end call: Press to end call,
.
the display will
show CALL FROM and the phone number
**********
the display will show PICK UP.
the display will show REJECT
the display will show HANG UP
Note:
* Some of cellphones do not support reject
call during bluetooth mode.
* Pressing and in the monitor also
performs the same function.
30
31
Last Number Dialing
Press button, last call number will
apear, press again, and then REDIAL
OK appears on the display during
conversation.
Note:
30
* Pressing in the monitor also performs
the same function.
* Pressing in the monitor also performs the
same function.
5
* Press in the monitor to turn off the
bluetooth function.
7
Closed
Open
20

41
Before You Start
01
8
8REMOTE Infrared Sensor
10
9RESET Button
7VOL+/ VOL-/SEL
11 SRC/PWR
Briefly press to select radio mode or playback
mode, press and hold it to turn the unit on or
off.
2
Press it to eject aDISC.
3BND/ /[ ](band selector/play/pause/
pair) Button
6
5ANGEL /Button
4
Eject Button
[ //]/[]([Search frequency
backward/Previous/The last phone, Answer a
telephone]/[Search frequency forward/Next
Track/Hangup, reject acall])
//
12 USB Socket
11 MENU Button
During playback mode, press this button to
enter the DISC setup menu;
during radio mode, press it to enter the radio
setup menu, press and hold it to enter the
main menu.
14 DISC Loading Slot
13 (Back Space) Button
15 OPEN Button
16 MUTE Button
17 LCD Screen
18
A/V IN
REL (release the front panel) Button
The Base
During radio mode, press it to select the bands;
During playback mode, press it to play or
pause.
During bluetooth, press it to pair.
09
96
Common SD Card Slot
Bluetooth Operational Interface
Press BT on the remote control or BT on
the monitorr to open the bluetooth operational
interface:
28
2
Dial last call, answer acall
3
Hang up, refuse acall.
4
Number Show
PAIR
5
6
ACH (audio change)
C(clear)
8
POWER
7
Press it to turn on or turn off the bluetooth
function.
1
To input the phone number.
Number Buttons
BACK
9
Using aBluetooth Wireless
Connection
The device can be dialed wirelessly in bluetooth
status. Before using the bluetooth function,
please turn on your cellphone bluetooth func-
tion.
Pairing Your Unit and Bluetooth
Phone
The device supports handsfree profile, head-
set profile, A2DP( Audio Advanced Distri-
bution profile)and AVRCP(Audio Video
Remote Control profile). Follow the pairing
instruction for the first time use, after that
the unit will connect automatically.
Note:
*To provide the best sound without or little
distorted sound(
).
Some reverberation or
sidetone is caused by cellphone or network
itself.
*.Perfect bidirectional conversation
*Bluetooth ver2.0 compliant.
*
.
Please well connect microphone to the unit
before connecting bluetooth
Pairing in Handsfree Mode
1. Press PAIR, PAIRINGshows on
the screen.
2. CELLPHONE CONNECTION to search
fixtures;
3. If the cellphone has connected, PAIR
SUCCESS appears, then CONNECT ,
will change from blue to red.
Note:
*Pressing on the monitor also performs
the same function.
Note:
*Some phones can switch the audio from the unit
to the phone.
Bluetooth
5
19 LOU/TA (loudness/traffic alarm) Button
Press it to changes the angle of the monitor. 20 BLUETOOTH Microphone

20
30
01
9
Before You Start
40
Remote Control
Tips:
For more information on replacing battery, please refer to Replacing the Battery
on page 6.
08
AV SET
Press SRC to switch to the AUX mode:
AUX Touch Screen Menu
For more details to adjust AUDIO, VIDEO
and SYSTEM (Auto 1: PAL, NTSC, SECAM),
(Auto 2: P-M, P-N). Please refer to pages 19 to 20.
To decrease the volume
To increase the volume
In AUX mode, select AV SET:
Press it to enter into bluetooth mode.
AUX
AUDIO ADJUST
VIDEO ADJUST
EXIT
VIDEO FORMAT
VOL+VOL-
AV SET
BLUET
SRC
Mode selector

39
Before You Start
10
01
1SOURCE/PWR
4AMS/MENU
3BAND/TITLE
5LOC/SUB -T
6ST/AUDIO (mono or stereo/language or
channel selector)
8OSD
Slow Forward/Rewind)
7PTY/ANGLE
13 PROG(Program playing)
12 Mute
P/N( system adjusting)
9ZOOM (zoom in or zoom out)
2GOTO (playing time/track)
RPT(Repeat Playing)
15
RDM (Playing Tracks at Random)
16
VOL+/VOL-/SEL
14
Press it toshow the currentinformation.
30
25 TA/LOUD (Traffic Alarm/Loudness)
SETUP
19
(F.R/F.F)
20
CLEAR
22
0~9 (Number) Buttons
23
(Eject Button)
24
18 (Stop Playing)
17 (Pause/Play)
AF/EQ (Alternative Frequency/Equalizer)
Button
26
21 (Previous/Next Track)
ENTER
27 (Left/Right/Up/Down
ENTER)
28 BT (bluetooth mode)Button
29 PAIR/VIDEO
During bluetooth mode, press it to pair.
30
31
During bluetooth mode, press to dial, re-dial
or answer a phone.
During IPOD mode, press it to back to
previous mode.
During bluetooth mode, press to hang up or
refuse a phone.
During IPOD mode, press it to back to the
first catalog.
07
/BACK
/ROOT
Tuner
RDS Setup
AF(Alternative Frequencies)
Press it to activate AF function.
TA (Traffic Alarm)
Press it to activate TAfunction.
Press it to select PTY code.
PTY(Program Type)
Press it to activate PTY function.
During PTY ON, press this button to
search the playing track s type.
PS:
SEEK+/-
Press it to tune automatically.
BACK
Press it to turn to return to the radio.
1
2
3
4
5
6
7
8
TP the current station doesn't have any
trafic programs TP Search
TP On the current staion is broadcasting
trafic program
Search
for stations with traffic programs
EON:No station has TP;EON ON:RDS
signal finds that another station is broad-
casting trafic program and reminds the user
of searching this station.
9TP(Traffic Program)
10 EON ON(
)
Enhanced Other Networks
information
To display the current RDS station's
programs information.
OFF OFF
SCH
123
4
5
6
7:
NONE
RDS 87.50MHz
8
NONE
9
10
Alternative Frequencies
26
Briefly press AF to activate the auto
searching station function. When AF is on,
the unit will skip to the RDS Frequency
with good signal.
It is also performed by pressing in the
monitor.
Note:
*
Traffic Alarm
25
Briefly press TAto activate the traffic
alarm function. When AF is on, there is TA
, the
mode will search TP stations automatically.
displayed on the LCD. If there is no TP
Note:
*
When TA is off, .the LCD will not display TA
*
Program Type
Briefly pressing PTY to activate PTY
function.
When PTY is on, PTY ON appears in the
monitor. You can press UP/DOWN
to select the program type, and then press
PTY CODE to search the special program.
The monitor displays PTY SEARCH.
*
The TA is green when it is played by a sta-
tion, if not, it is yellow.
When TAis playing, the volume will be ad-
justed to a TAlevel automatically When in
other modes (such as DISC,AUX), if a TA
program is played, the mode will skip to the
RDS status automatically. It will resume to
the primary mode after the TAis over.
If PTY is off, PTY OFF appears in the
monitor and the searching is disabled.
1
7
Note:
It is also performed by pressing in the
monitor.
4
It is also performed by pressing in the
monitor.
2
2

01
11
Before You Start
38
AM Tuner Section
VCD/CD Player Section
530-1710 (KHz)
(U.S.A.)
VCD Signal System AUTO/PAL/NTSC
General
FM Section
87.5-108(MHz)
(Europe)
87.5-107.9(MHz)
(U.S.A.)
10.7MHz
10dBuV
50dB
30dB 1KHz
40 -12KHzHz
Note:
Due to continuous product improve-
ment, specifications and design are
subject to change without notice.
Specifications
Power Requirement 14.4V DC
(11-16V allowable)
Load Impedance
7dB
Bass 100Hz
Treble 10KHz
Tone Controls
Approx.197x178 x 50
mm (d/w/h)
Dimensions
Approx.2.7kgWeight
Tuning Range
IF Range
Usable Sensitivity
(-30dB)
Signal-to-noise Ratio
Stereo Separation
Frequency Response
450KHz
IF Range
32dBuVUsable Sensitivity
(-20dB)
60dB
Signal-to-noise Ratio
55dB(1KHz)Separation
0.3%
Distortion
Max.Power Output 85W x 4
522-1620(KHz)
(Europe)
Frequency Range
(Optional)
(Optional) DISC Player Section
DISC Signal System AUTO/PAL/NTSC
60dB
Signal-to-noise Ratio
60dBSeparation
2
Channels
40Hz to 16KHz
Frequency Response
07 Tuner
During radio status, you can press ST
button on the remote control MO-
NO mode or STEREO
to select
mode.
MO/ST Selector
Stereo reception is on when Stereo
appears.
It is switched to MONO mode ono
appears.
when M
It is only valid on remote control.
It is only valid in FM.
6
Switch to MONO compulsively to improve
the listening quality when week signal.
Note:
*
*
*
AMS
During radio status, briefly press AMS
button on the remote control to scan each
stored seconds respectively which
are Number Buttons (from 1
to . When you can press responding
Number Buttons or ton when your
desired station is
station 6
stored in
6) the cor
AMS but
on, it will stop on that
station.
23
4
When you press and hold AMS for
more than 2 seconds,
memory storing The
radio automatically selects and
has it stored in any one of Number
Buttons (from1 to 6).
button
it will
function.
a station
the
automatically
activate the
Note:
* The unit can store up to 6 stations
each band.
* Pressing in the monitor also performs
the same function.
for
4
23
Number Buttons
During radio status, Number Buttons
(from 1 to 6) can help you yo-
ur favorite station. You can follow the
as below:
store
steps
23
During radio status, press Number Buttons
to receive the stored stations.
When turned to a station,press and hold
any one of the Number Buttons
(from 1 to 6) until the number app-
ears on the LCD, which indicates that
station is already stored in the corresp-
onding number button.
Press and hold another number button
more than 2 seconds when listening in
a station in one number button s, the
station will be stored in that number
button.
1
2
Pressing in the monitor performs the same
function.
Note:
*5
Goto FREQ
2
Press GOTO, and the monitor
to input the valid
frequency as 100.00,. The program will then
be played.
shows FREQ.
Then press the number
Note:
*It is only valid on remote control.
*It is only valid when GOTO FREQ is ON in
main menu.
7
On Screen Display
8
During radio status, briefly press OSD
to display the edition information. The preset
frequency displays as the default setting.
1440
X234 plxels
Resolution
600 NITS
Brightness

37
Installation
02
12
Wiring Connection
Video Out 1 (Grey line with
yellow head)
(Light Grey line with
red & white head) (Dark Grey line with
red & white head)
(Brown line with
yellow head)
Video Out 2 (Grey line with
yellow head) SUB-W RCA (Brown line with
brown head)
2
Orange
Red
Yellow
Black
Ignition Key
Battery +
Ground
Rear L
Speaker
Front L
Speaker
Green/Black
Green
White/Black
White
Brown
Pink
Violet/Black
Blue
Violet
Grey/Black
Grey
Parking Brake
Antenna
Power +
Rear R
Speaker
Front R
Speaker
41 Screw Hole
2
5
Output Plug(Male) Wire Clip
3
Antenna Receptacle
Output Socket(Female)
FILTER
&FUSE
BOX
6Fan Window
3
45
61
AUX Audio input (black line with red
& white head) AUX Video input
(black line with
yellow head)
Antenna
07
Ipod Wire Conection (White)
(+5V)
Tuner
Press this button to select the signal
source.
Listening to the radio
LOC pears on the display and only
local tion is available. when it disappears
b
ap
sta
oth distance and local stations can be
received.
DX/LOC Selector
During radio status, press LOC button
to select or weak station reception.strong
5
The function is only valid on remote control.
The function is invalid in AM band.
Note:
*
*
Band Indicator
Shows which band the radio is tuned
to.
1
Preset Number Indicator
Shows what preset has been selected.
2
Shows which frequency the tuner is
tuned.
Frequency Indicator
3
SEEK+/SEEK-
Briefly press to tune by the presettable
range, press and hold to tune automatically.
4
6BAND(AM/FM)
To select the bands.
7MENU
8BLUET
Press it to enter the RDS MENU.
9RDS
5The 6 stations of the current band.
Briefly press to select station, hold and
press to save the current station to one
of the 6 stations.
Manual/Automatic Tuning
Manual Tuning: ress ( button
on the remote control continuously to select
a or respectively.
P or )
station downward upward
Automatic Tuning: ress and
)button seconds, the ra-
dio a station
or respectively and plays when
it finds a station.
P hold ( or
for more than 3
automatically searches down-
ward upward
Pressing on the monitor performs the same
function.
Note:
*4
Note:
* Pressing on the monitor or BND on the
main unit also performs the same function.
FM2
AM2 AM1
FM3
FM1
During radio status, repeatedly press
BAND button to select bands in
lowing order:
the
fol
Band Selector
3
(For Two Bands)
Selecting the Stored Station
During radio status, press button to
select the stored station upward, press
to select downward.the stored station
27
Note:
The function is only valid on remote control.
*
3
123
4
6 7 8 10
5
87.50M 87.50M
107.90M
106.10M98.10M
90.10M
Radio1 P . CH:1 87.50MHz
9
10 SRC
27
Press it to enter the Bluetooth MENU.
Press it to enter the MAIN MENU.
REAR RCA Line
OUT R/L
FRONT RCA Line
OUT R/L
Rear View
Camera Input
Rear View Camera
Input Trigger
Front Illumination
Control(+12V)

02
13
Installation
36
6
M4x3 &M5x5
7
Installing the unit
Main Parts List
Mounting Sleeve x1 Rear Mounting Bolt x1 Harness Rubber x1 4 Screws Each
Outer Trim Frame x 1 Connecting Wire x1 Steel Bar x 1
Installation Method DIN Front-Mount
Panel
To support the unit
Bend these claws
outward for a tight fit,
if necessary.
Install Outer Trim Frame
Install twor M5x6 screws on both sides (left and right)
of the lock hook brackets
Install the unit with four M2 2 screws
06 CD/MP3/SD/USB
During CD status, press OSD button the
display shows:
Single elapsed
Total
elapsed
Total
remain
Single remain
Note:
* This function is operated by using the remote
control.
On Screen Display
* Pressing in the monitor also performs the
same function.
Pause the Playback
During CD/MP3/SD/USB playback, Press
to switch between play and pause.
Note:
Press ( or ) on remote control to
perform fast rewind or fast forward.
Skip backward/forward/F.F
/F.REW the playback
20
2 X 4 X 8 X 16X
Note:
* This function is operated by using the remote
control.
Program Playing
During CD mode, press PROG, the TFT
displays the program menu. Press NUMBER
BUTTONS to select the track Number and
then press to move the cursor to START.
Press ENTER to start program playing.
Move the cursor to EXIT and press ENTER
to exit the program playing. Move the cursor
to and press ENTER to the previous page;
move the cursor to and press ENTER to
the next page. During this process, press
to cancel the program playing.
13
18
The function is only valid on remote control.
Note:
*
27
* Press CLEAR to clear the mistake input.
22
Eject SD Card
Push SD card to eject it.
During SD Mode:,ejecting the SD card will
switch the unit to DISC mode. If there is
no disc, the unit will switch to USB Mode.
If no USB, the unit will switch to Radio mode.
Eject USB
Pull out the USB to eject it.
During USB Mode, removing the USB will
switch the unit to Disc. If there is no DISC,
it will switch to Radio mode.

35
Installation
14
02
Installing the unit
Bracket supplied
to your car
Dashboard
or Console
Detach the Unit
2. Unscrew the 4 screws, pull the main
unit out.
1. Remove the outer trim frame.
Select a position where the screw holes of
the mounting bracket lied with the car and
the of the main unit
fitted), and at 2
places on each fasten them to
the car.
supp
screw holes become aligned
(are tighten the screws (see
side). And then
4
Note:
Outer Trim Frame Mounting Sleeve
are not used
and
for installation method.
Installation Method
Installation using the screw holes at
sides of the unit.the
5
1
06
CD/MP3/SD/USB
Repeat Playing
During CD/MP3/SD/USB playback , press
replay the current track, press
it again to cancel this function.
RPT to
15
* This function is operated by using the remote
control.
Note:
* The default setting is DISC Repeat.
* Press CLEAR to clear the mistake input.
22
Number Buttons
Press one of Number Buttons(0~9) to
select a track to play automatically.
23
* Press track region and the screen shows the
number keys, touch the number to select tracks.
Note:
Selecting Track
2
* This function is operated by using the remote
control.
Note:
* Press CLEAR to clear the mistake input.
22
During CD playback, first press GOTO,
and TFT shows : DISC go to:--:--,press your
desired time of the playback by using num-
ber buttons.
Then press GOTO button, track go to:--:--
appears on TFT, now input your desired
numbers to play the current time of your
selection.
During MP3/SD/USB mode, first press
GOTO and the TFT shows:---. Then press
NUMBER BUTTONS to input the MP3/SD
track's Number to play it;then press GOTO
button, and the TFT shows : --:--, now input
the desired time to play the current track at
this point.
2
Stop Play
During CD/MP3/SD/USB playback, Press
to stop the playback.
18
* Pressing on the monitor performs the same
function.
Note:
During CD/MP3/SD/USB playback,
RDM button on the remote control to
play random under the directory
which you select. P return to
press
any track at
ress it again to
normal playing.
Playing Tracks at Random
16
* This function is operated by using the remote
control.
Note:
Selecting Tracks
Note:
During MP3/SD/USB playback, press
to play previous track, press to play
next track.
During CD playback, first press to
return to the beginning of the current track,
press again within 3 seconds to play
previous track , press to play next track .
* Pressing and on the monitor perform
the same function.
* In CD/MP3/SD/USB mode, you can press
track's Number or name to play.
21
21
21
21
21
2

02
1534
Installation
Install the Front Panel
Put notch (shown as picture) onto shaft
.And then slightly press into the right side.
B
A
Detach the Front Panel
Press REL button in the upper right corner,
and then the front panel will be released.
06 CD/MP3/SD/USB
During CD playback, touching the screen
shows the following menu:
CD/MP3/SD/USB Setup
Track region
During MP3/SD/USB playback, touching
the screen shows the following menu:
Track region
Scan the tracks
CARD
CARD
CARD appears in the SD mode and USB
appears in the USB mode.
SEL
Sound characteristics
Decrease volume level, adjust some items
Increase volume level, adjust some items
Play/pause
Stop
Previous track
Next track
DISC setup menu
MODE
Mode selector
Track Region:
Press this region and the screen
shows the following menu:
number keys appears, touch the
number to select tracks.
Touch the " X" to exit this menu.
00:00
001/105
00:00
MP3
MP3
MP3
MP3
MP3
MP3
MP3
Demo
amour
Automatic
Be natural_s_e
Can you celebr
clon_bing bing
123
456
789
-- 0X
01:18 Track 03/16
01 Track
02 Track
03 Track
04 Track
05 Track
06 Track
CD
CD
CD
CD
CD
CD
00:00
001/105
00:00
MP3
MP3
MP3
MP3
MP3
MP3
Demo
amour
Automatic
Be natural_s_e
Can you celebr
clon_bing bing
B
A
Insert a CD/MP3 disc into the slot, the unit
will play automatically.
Press REL after turning the unit on, then
i
If
nsert a SD card when the TFT is slanted and
the programs in the card will be played.
From the back of the main unit insert the
USB and programs in the USB will be pl-
ayed.
you have loaded a disc, USB and SD Card,
press source to toggle thru and choose which
media source you would like to choose.
CD/MP3/SD/USB Operation
Note:
*
Press SRC on the main unit to switch to DISC
mode. W
ith SD and USB inserted, press this key
repeatedly to switch between USB, SD and disc.
*
Press to turn to mode switch.
MODE
*
Bit rate not more than 320kbps.
*
Supports ID3V1.

33
Common Operations
16
03 05
To Select Source by Menu
In any mode, press SRC on the monitor, the
following menu will appear:
Press it to select your desired item: FM,
DISC, IPOD ,SD Card, USB, BT, AUX, and
press SET to enter into the main menu. If
you want to enter into bluetooth, press
BT;if it does not enter into, that means the
unit does not include the function. In any
mode, press SRC to return to the previous
mode. Press BACK to return to previous
mode.
* If the font display in cyan, that means this does
not have this function.
Note:
Setting the Sound Characteristics
Repeatedly press SEL button to select
the mode in the following order:desired
* Pressing SEL with rotating VOL on the main
unit also performs the same function.
14
After selecting the desired mode, you
adjust the current level by pressing
.
can
VOL
buttons
14
Notes:
* Pressing PWR button on the main unit also
performs the same function.
Note:
Press VOL+ button to increase
sound level and press VOL- button to
decrease sound level.
the
the
Volume Control
* Rotating VOL+/- on the main unit or VOL+/-
on the monitor performs the same function.
14
14
Note:
* This function is operated by using the remote
control only.
EQ Setting
Repeatedly pressing button to choose
the following modes turn:
EQ
in
While listening to the popular music, classic
music or rock music, you select the co-
rresponding preset modes to adjust the sou-
nd quality ing EQ button.
can
perfectly by us 26
3
Note:
26
The default setting is OFF.
OFF
CLAS
ROCK
POP
RADIO
DISC/VCD/MP4
---Preferences page--
Default Exampleshowinghowtosetloadfactorysetting:
(Press , or , then press ENTER)
(Press
--Preference Page--
Go ToPreference Page Load Factory Setting
TVType
Audio
Subtitle
DISC Menu
Parental
Password
Default
Auto
Eng
Eng
Eng
--Preference Page--
TVType
Audio
Subtitle
DISC Menu
Parental
Password
Default
Auto
Eng
Eng
Eng
Reset
Reset the Unit
Operating the unit for the first time or after
replacing the car battery, you must reset
the unit.
Notes:
* When ome errors occur on the
also press RESET
It will
s display, you can
button to resume to normal.
erase the clock setting and some me-
morized functions.
* This function can only be operated by the
main unit.
Remove the front panel, then press RESET
button in the panel w object,
(such as a ball the unit to
initial status.
ith a pointed
point pen) to set
9
Turning the Unit On/Off
Briefly press PWR button to turn on the
unit, during working status, press and hold
it to turn off or turn on the unit.
1

03
1732
Common Operations
05
Turning Loudness On/Off
Press and hold
. Press it again
to quit this function.
LOUD button to activate
the loud function. Pressing the button will
increase the low frequency
25
Note:
Briefly pressing MUTE on the main unit also
performs the same function.
Note:
*
Press button to shut off sound
output, and appears on the LCD.
Press it again to resume to previous volume
level.
the
Mute Function
12
Mode Selector
* Briefly pressing SRC on the main unit also
performs the same function.
Note:
Repeatedly briefly press SOURCE button
to select the different modes available.
1
Receptor on the main unit for the wireless
remote control.
Infrared Sensor:
8
Night Mode
Press and hold MUTE button to enter
the night mode, press it again to switch to
the normal mode.
3
Note:
* This function is operated by the main unit only.
Eject a DISC
Briefly press to
eject a disc or the TFT will return to the
initial status.
while the TFT is slanted
Note:
* Pressing on the remote control also performs
the same function.
Angle Adjustment
* When adjusting the monitor angle, use this
method! Otherwise the unit will be damaged.
18
Notes:
* This function is operated by the main unit only.
Press and hold REL till ANGLE appears
on the monitor, the press to adjust
monitor backward by definite angle, press
to adjust it forward.
5
5
Insert a SD Card
Briefly press
insert a common SD card into SD slot
REL after turning the unit on,
then .
Then reinstall the front panel.
DISC/VCD/MP4
---Preferences page--
DISC Menu ExampleshowinghowtosetDISCMenuLanguage:
(Press , or , then press ENTER)
(Press
--Preference Page--
Go ToPreference Page Preferred Menu Language
TVType
Audio
Subtitle
DISC Menu
Parental
Password
Default
Auto
Eng
Eng
Eng
--Preference Page--
TVType
Audio
Subtitle
DISC Menu
Parental
Password
Default
Auto
Eng
Eng
Eng
Parental Exampleshowinghowtosetparentalcontrol:
(Press , or , then press ENTER)
(Press
--Preference Page--
Go ToPreference Page Set Parental Control
TVType
Audio
Subtitle
DISC Menu
Parental
Password
Default
Auto
Eng
Eng
Eng
--Preference Page--
TVType
Audio
Subtitle
DISC Menu
Parental
Password
Default
Auto
Eng
Eng
Eng
Password Exampleshowinghowtosetpassword,and thedefaultpasswordis8888.
(Press , or , then press ENTER)
(Press
--Preference Page--
Go ToPreference Page Change Password
TVType
Audio
Subtitle
DISC Menu
Parental
Password
Default
Auto
Eng
Eng
Eng
--Preference Page--
TVType
Audio
Subtitle
DISC Menu
Parental
Password
Default
Auto
Eng
Eng
Eng
Change
2
3
4
5
6
7
8
Off
G
PG
PG 13
PGR
R
NC 17
Adult
English
French
Spanish
Chinese
Japanese
Korean
Russian
Others
* Pressing LOU on the main unit also performs
the same function.

3118
04 Main MenuMain Menu 06
CD/MP3/SD/USB
Main Menu Setup
* Press and hold SETUP or press MENU on
the main unit to set up this menu;press them
on the monitor to select the option.
This menu includes , ,
SOURCE, SYSTEM, EXIT. Press them on
the monitor to set the desired status.
VIDEO AUDIO
Note:
1.Video Adjustment
After selecting VIDEO, the sub menu will
appear as follows:
In this menu you can adjust ,
COLOR, TINT, BRIGHT, .
CONTRAST
PICTURE
Picture Adjustment
Press PICTURE in this menu, it will appear
as follows:
Press and to adjust the size, then
press SAVE to save the setup, press EXIT
to exit this menu.
Note:
* Adjusting the other options perform the same
operation.
SHARP 20
EXIT
SHARP
EXIT
AUDIO
SYSTEM
SOURCE
VIDEO
EXIT
Subtitle Exampleshowinghowtosetsubtitlelanguage:
(Press , or , then press ENTER)
(Press
--Preference Page--
Go ToPreference Page Preferred subtitle Language
TVType
Audio
Subtitle
DISC Menu
Parental
Password
Default
Auto
Eng
Eng
Eng
--Preference Page--
TVType
Audio
Subtitle
DISC Menu
Parental
Password
Default
Auto
Eng
Eng
Eng
English
French
Spanish
Chinese
Japanese
Korean
Russian
Others

04
19
Main Menu
30 19
05
---Preference page---
TV Type ExampleshowinghowtosetTVtype:
(Press , or , then press ENTER)
(Press
--Preference Page--
Go ToPreference Page Set TV Standard
TVType
Audio
Subtitle
DISC Menu
Parental
Password
Default
Auto
Eng
Eng
Eng
--Preference Page--
TVType
Audio
Subtitle
DISC Menu
Parental
Password
Default
Auto
Eng
Eng
Eng
PAL
NTSC
Audio ExampleshowinghowtosetAudiolanguage:
(Press , or , then press ENTER)
(Press
--Preference Page--
Go ToPreference Page PreferredAudioLanguage
TVType
Audio
Subtitle
DISC Menu
Parental
Password
Default
Auto
Eng
Eng
Eng
--Preference Page--
TVType
Audio
Subtitle
DISC Menu
Parental
Password
Default
Auto
Eng
Eng
Eng
Auto
English
French
Spanish
Chinese
Japanese
Korean
Russian
Others
DISC/VCD/MP4
3.Source Adjustment
In the main menu, press SOURCE on the
monitorr, the sub menu will appear as follows:
You can switch all of the items to ON or
OFF, press the corresponding button to set.
If one of them was set OFF, that function
is null.
4.System Adjustment
After selecting SYSTEM, the sub menu
will appear as follows:
In this menu you can adjust CLOCK SYS,
KEY BEEP and so on.
2.Audio Adjustment
After selecting AUDIO, the sub menu will
appear as follows:
You can adjust VOLUME, SUBWOOF,
BALANCE, FAD, BASS, TREBLE, For
example, press FAD, the setting menu
will appear as follow:
Press and to adjust the desired FAD
level, press EXIT to exit this menu.
Note:
* Adjusting the other options perform the same
operation.
Note:
* If the font display is in red, this model does
not contain this function.
Note:
* If the item display in sky-blue, then it can not be
set up.
CLOCK SYS
KEY BEEP
MONI FLEX
EXIT
VOLUME
BALANCE
BASS
FAD
TREBLE
EXIT
SUBWOOF
CLOCK SYS
KEY BEEP
MONI FLEX
EXIT
EXIT
FADE F4
SUBWOOF
DISC ON
AUX2 ON
IPOD ON
AUX1 ON

29
Main Menu
04
20
05
DISC/VCD/MP4
Key Beep
In this menu you can adjust KEY BEEP,
press it on the monitor and select ON or OFF,
the default setting is ON, it means when you
press the keys, they sounded.
CLOCK SYS
KEY BEEP
EXIT
MONI FLEX
AMS Fullup
Clock System
Press CLOCK SYSTEM on the monitor to
set 12 HOUR or 24 HOUR in this menu.
CLOCK SYS
KEY BEEP
EXIT
MONI FLEX
In this menu you can adjust SUBWOOFER,
press it on the monitor and select ON or OFF,
the default setting is ON.
CLOCK SYS
KEY BEEP
MONI FLEX
EXIT
CLOCK SYS
KEY BEEP
MONI FLEX
EXIT
EXIT
LAMP SEL
--General Setup Page--
Captions Exampleshowinghowtosetcaptionson/off:
(Press (Press , or , then press ENTER)
--General Setup Page--
TV Display
Angle Mark
OSD Lang
Captions
Screen Saver
Wide
On
Off
On
Go ToGeneral Setup Page
--General Setup Page--
TV Display
Angle Mark
OSD Lang
Captions
Screen Saver
Wide
On
Off
On
Closed Captions
Off
On
Screen Saver ExampleshowinghowtosetScreenSaveron/off:
(Press (Press , or , then press ENTER)
--General Setup Page--
TV Display
Angle Mark
OSD Lang
Captions
Screen Saver
Wide
On
Off
On
Go ToGeneral Setup Page
--General Setup Page--
TV Display
Angle Mark
OSD Lang
Captions
Screen Saver
Wide
On
Off
On
Screen Saver
On
Off
Eng Eng
Eng Eng
In this menu you can adjust AMS FULLUP.
If the setup is ON, when the presettable
stations are full, no new station is allowed to
store.When you select OFF, it will search
continually.
Reverse Pola
LAMP SEL
EXIT
LAMP SEL
Setting REVERSE POLA in this menu.
If the signal is +12V , please press
BATTERY in the monitor. If the signal is
0V, please press GROUND.
MONI FLEX
CLOCK SYS
KEY BEEP
EXIT
MONI FLEX
CLOCK SYS
KEY BEEP
MONI FLEX
EXIT
MANUAL
AUTO
In this menu you can adjust MONI FLEX,
The display screen is flexed automatically
when set AUTO, automatics closes when
set MANUAL.
EXIT
LAMP SEL
Subwoofer
EXIT
SUBWOOFER