Boston Scientific Precision Montage User manual

Remote
Control
PRECISION
Spinal Cord Stimulator System
Precision Montage™ | Precision Spectra™ |
Precision Novi™
Quick Start Guide

Your PrecisionTM
Remote Control is
designed to check
the battery level of
your stimulator and
help you control your
stimulation settings
to best suit your
individual needs.
And it's easy to use!
Decrease
Navigation
Home
Programs

An overview
Lock/Unlock
USB power supply
Increase
Screen
Decrease
Navigation
Home
Programs
Stimulation
on/off
+
Remote Control
3

•To get started, press and hold the
”unlock” button on the right-hand
side of your remote, until the text
”Release Side Button to Unlock”
appears on the screen.
•Now you can turn stimulation on by
pressing the red button in the center of
your remote.
•To turn stimulation off, simply press the
red button again.
How can I start or stop stimulation?
4

If your doctor allows you to change your stimulation level,
this is easily done on your remote:
How can I increase or decrease
stimulation?
•You can then use the “plus” or “minus”
buttons beside the on/off button to
adjust your stimulation to the right level
for you.
5

If your doctor has set up different stimulation programs for you,
you can access these in just a few clicks:
Either:
•press the “Programs” button on the
left side of your remote.
How can I access or change
stimulation programs?
6

Or:
•Click the right-hand arrow to see the
main menu.
•Click the right-hand arrow a second
time to enter the “Programs” menu.
•Click the right-hand arrow a third time
to enter the “Change Program” menu.
•From there you can navigate through the
different programs with the up and
down arrows.
•Select your desired program by clicking
on the right hand arrow one last time.
7

If your remote offers you different stimulation
programs, it’s important to talk to your doctor
about which programs are best for which
symptoms. That way you can pick the right
program for your needs.
•If your doctor allows you to change the
stimulation intensity, you should be able
to tell which level is right for you based
on the improvement in symptoms
you feel.
•If you feel any side effects, make sure to
stop increasing stimulation intensity.
How do I know the
stimulation program
and intensity is
right for me?
8

•To charge your remote, simply
connect it to the USB power
supply and plug into a plug
socket.
•Whenever the remote is low
on battery, it will show you a
reminder to recharge.
How can I charge
my remote?
9

•Make sure your remote can communicate properly with your
stimulator: If your stimulator doesn’t respond to the remote, try
moving the remote closer. Remember too that the stimulator
cannot communicate with the remote while charging.
•Don’t worry if your remote screen goes blank after around a
minute of inactivity: The remote is entering into sleep mode so
as to save battery.
•Keep up to date via your remote’s
Home screen: The Home screen shows
you the name of the stimulation pro-
gram currently running as well as the
level of stimulation strength. It also
shows you the remote’s battery level
and whether stimulation is on or off.
Using your PrecisionTM
Remote Control
Top Tips
10