BOWMAN BD602-0012 User manual

BOWMAN Dispensers
800.962.4660 • www.BowmanDispensers.com
BD6020012TDSe
Product Videos:
BowmanDispensers.com/Product-Videos
Protection System Isolation Bundle
BD602-0012
Product Description:
• Bundle Includes:
-PS016-0212 Protection System
◦Holds disposable or reusable gowns, aprons, or
coveralls/jumpsuits, three boxes of gloves, one box
of earloop masks, one box of shield masks, and
miscellaneous supplies
◦Quartz Beige ABS Plastic
-MP-047 Sign Holder - Clip-On
◦Holds 8.5" x 11" signage
◦Clear PETG Plastic
-MB-600 Hanger - Door - Standard
◦Hooks over a door no thicker than 2.44"
◦Quartz Beige Powder-Coated Steel
Primary Area for Product Usage:
• Anywhere protective equipment products are needed
Dispenses:
• Top left: Gowns, aprons, or coveralls/jumpsuits no larger than
14.90"W x 15.25"H x 4.50"D (37.8 cm x 38.7 cm x 11.4 cm)
• Top right: Box(es) no larger than 8.10"W x 9.90"H x 4.50"D
(20.6 cm x 25.1 cm x 11.4 cm)
• Middle right: Box(es) no larger than 8.00"W x 5.30"H x 4.50"D
(20.3 cm x 13.5 cm x 11.4 cm)
• Bottom: Box(es) no larger than 11.50"W x 5.50"H x 4.50"D
(29.2 cm x 14.0 cm x 11.4 cm)
• Bottom right: Item(s) no larger than 4.93"W x 5.50"H x 4.50"D
(12.5 cm x 14.0 cm x 11.4 cm)
Product Specications (overall assembled dimensions):
• 23.38"W x 36.51"H x 5.40"D (59.4 cm x 92.7 cm x 13.7 cm)
• 9.3 lbs (4.2 kg) - approximated
Package Specications:
• Package Quantity: 1 per case
• 32"L x 26"W x 6"H (81.3 cm x 66.0 cm x 15.2 cm)
• 12.0 lbs (5.3 kg) - approximated
Mounting Specications:
• Left: Protection System, Right: Door Hanger
Consumables not included
6.00
1.75
12.13
2.50

©2022 BOWMAN® Dispensers, LLC. All Rights Reserved. Product specications subject to change without notication. Consumables not included. BD6020012TDSe
BD602-0012 - Installation
Information subject to change without notice. Dimensions are approximate. (Not to scale)
BOWMAN Dispensers
800.962.4660 • www.BowmanDispensers.com
Assembly Instructions
Protection System Isolation Bundle
BD602-0012
• Proper Hanging Procedure:
1) Attach hanger securely - back of hanger must lay ush
against surface.
• The exible tabs on the side are designed to hold product
securely in the dispenser.
• To add or remove product, press down on the tab and insert
or pull box out.
• Clip the Sign Holder over the top of the gown section and
insert desired signage.
• Free isolation signs can be downloaded at
www.BowmanDispensers.com.
1 2
3 4
Installation
Always mount dispensers securely prior to loading with product.
2) Hang dispenser on hanger.
3) Load product in dispenser.
4) To remove, reverse order of steps.
Parts included:
• Protection System • Sign Holder
• Door Hanger
Tools Required:
• No tools required to assemble dispenser

Characteristics & Care
BD602-0012
Protection System Isolation Bundle
Designed for Long-Term, Heavy-Duty
Applications
Designed for Long-Term Use Designed for Long-Term, Heavy-Duty
Applications
The combination of copolymers
(Acrylonitrile, Butadiene, and
Styrene) gives ABS an excellent
combination of strength, rigidity,
and toughness.
ABS is chemical and stress-crack
resistant. It is tough, dimensionally
stable, and will hold up to long-term
use. It possesses high strength and
performance characteristics at a
reasonable cost.
Our steel dispensers and stands
are coated with polyester powders
which makes them highly resistant
to corrosion.
Powder-coated steel is ideal for
dispensers used in a healthcare or
an industrial setting because it is
impact resistant and is not effected
by extremes in temperature.
Dispensers and stands made
of powder-coated steel are both
attractive and functional, providing
years of service.
Copolyester resin is designed for
heavy-duty applications, and is
used by BOWMAN® Dispensers.
We never use acrylic in our
products.
Copolyester (PETG) is typically
15-20 times tougher than general
purpose acrylic. PETG is made to
withstand handling and reduce
losses due to breakage.
PETG resists a variety of chemicals
and commonly used cleaning
agents. It is tough and durable (not
brittle), providing years of trouble-
free functionality and long life.
Clear optical characteristics mean
the viewer can see the content,
read text, and see true colors
through the material. It complies
with FDA regulations for food
contact.
Use mild soap and water to clean.
Petroleum-based oils, solvents, and
paints should not be used.
Standard hospital cleaning supplies
can be used.
For best results, clean by washing
the surface with a diluted solution
of a mild, non-abrasive detergent
in cold or warm water and a non-
abrasive cloth. Standard hospital
cleaning supplies can be used.
Dry with a soft cloth. Do not use
any solvent-based materials,
abrasives (e.g. Scotch-brite, steel
wool), or apply excessive force
during cleaning.
Most cleaning chemicals do not
weaken the surface or cause
damage to the material. Suggested
cleaning method is to use a soft
cloth, warm water, and mild soap.
ABS Plastic
PS016-0212
Powder-Coated Steel
MB-600
PETG Plastic
MP-047
Material Characteristics
Care and Cleaning
BD602-0012 - Characteristics & Care
Information subject to change without notice. Dimensions are approximate. (Not to scale)
BOWMAN Dispensers
800.962.4660 • www.BowmanDispensers.com
BD6020012TDSe