BOWMAN ED-097 User manual

Product Description:
•Infection Prevention System
• Holds one to two boxes of facial tissues or one box of gloves,
one hand sanitizer bottle, and one wet wipe canister
• 11.00"W x 8.50"H MP-075 Sign Holder (included)
• Keyholes for wall mounting, can sit on a counter, or mount to a
Bowman®Floor Stand
• Quartz Beige ABS Plastic and Clear PETG Plastic
Primary Area for Product Usage:
•Anywhere personal protective equipment is needed
Dispenses:
• Left: Bottles/canisters no larger than 3.75" (9.5 cm) in diameter
• Middle: Box(es) no larger than 5.00"W x 10.00"H x 5.50"D
(12.7 cm x 25.4 cm x 14.0 cm)
• Right: Canisters/bottles up to 5.50" (14.0 cm) in diameter
Package Specications:
• Package Quantity: 1 per case
• 16"L x 12"W x 12"H (40.6 cm x 30.5 cm x 30.5 cm)
• 5.0 lbs (2.3 kg) - approximated
Product Specications (overall external assembled dimensions):
• 15.00"W x 20.28"H x 5.75"D (38.1 cm x 51.5 cm x 14.6 cm)
• 1.8 lbs (0.8 kg) - approximated
Mounting Specications:
Infection Prevention System
ED-097
Alternative Uses:
• ED-097 shown below with gloves instead of tissues
1.88
8.63
1.5012.00
.75.75
R.25
(2x)
Ø.25
R.13 (2x)

ED-097 - Installation/Characteristics & Care
Information subject to change without notice. Dimensions are approximate. (Not to scale)
• Attach sign holder using included barrel screws.
• Mount securely to a wall with screws approved and supplied
by building maintenance.
• System can also be mounted to a BOWMAN Floor Stand
(sold separately) as shown below.
• Load with product only AFTER dispenser is secured.
1
2
Installation Instructions/Characteristics & Care
Infection Prevention System
ED-097
Installation
Always mount dispensers securely prior to
loading with product.
Parts included:
•Dispenser • Sign Holder
• Barrel Screws (2x Sets) • Infection Prevention signage
Tools Required:
• No tools required to assemble dispenser
ABS Plastic
PETG Plastic
Care and Construction
Material Characteristics
Material Characteristics
Care and Cleaning
Care and Cleaning
Designed for Long-Term, Heavy-Duty Applications
Designed for Long-Term, Heavy-Duty Applications
The combination of copolymers (Acrylonitrile, Butadiene,
and Styrene) gives ABS an excellent combination of
strength, rigidity, and toughness.
ABS is chemical, stress-crack resistant, dimensionally
stable, and will hold up to long-term use. It possesses high
strength and performance characteristics at a reasonable
cost.
Copolyester resin is designed for heavy-duty applications,
and is used by BOWMAN® Dispensers. We never use
acrylic in our products.
Copolyester (PETG) is typically 15-20 times tougher than
general purpose acrylic. PETG is made to withstand
handling and reduce losses due to breakage.
PETG resists a variety of chemicals and commonly used
cleaning agents. It is tough and durable (not brittle),
providing years of trouble-free functionality and long life.
Clear optical characteristics mean the viewer can see
the content, read text, and see true colors through the
material. It complies with FDA regulations for food contact.
Use mild soap and water to clean. Petroleum-based oils,
solvents, and paints should not be used.
Standard hospital cleaning supplies are approved for use
on our ABS plastic products.
Most cleaning chemicals do not weaken the surface or
cause damage to the material. Suggested cleaning method
is to use a soft cloth, warm water, and mild soap.