BOWMAN BD111-0012 User manual

Product Description:
• Kit Includes:
-RS001-0212 Respiratory Hygiene Station
◦Holds two boxes of face masks, one - two boxes of facial
tissues or one box of gloves, and one hand sanitizer
bottle or hand sanitizing wipe canister
◦Quartz Beige ABS Plastic
-KS010-0412 Floor Stand
◦Quartz Beige Powder-Coated Steel
-MP-070 Sign Holder - Vertical
◦Holds 8.5" x 11" signage
◦Clear PETG Plastic
• Assembly hardware included
Primary Area for Product Usage:
• All ports of entry
• Anywhere respiratory hygiene products are needed
Dispenses:
• Left: Bottles no larger than 4.06"W x 4.06"D or 4.00" diameter
(10.5 cm x 10.5 cm)
• Middle: Box(es) no larger than 7.75"W x 4.00"H x 4.75"D
(19.7 cm x 10.2 cm x 12.1 cm)
•Right: Box(es) no larger than 5.50"W x 10.00"H x 4.75"D
(14.0 cm x 25.4 cm x 12.1 cm)
Product Specications (overall assembled dimensions):
• 18.00"W x 58.36"H x 18.00"D (45.7 cm x 148.2 cm x 45.7 cm)
• 19.2 lbs (8.7 kg) - approximated
Package Specications:
• Package Quantity: 1 per case
• 36"L x 20"W x 6"H (91.4 cm x 50.8 cm x 15.2 cm)
• 24.0 lbs (10.9 kg) - approximated
Sanizer, face
masks, and ssues
not included
Cover Your Cough Compliance Kit
BD111-0012

BD111-0012 - Installation
Information subject to change without notice. Dimensions are approximate. (Not to scale)
To secure base to column, turn column
upside down (with top plate down)
and place base inverted, as shown, on
column.
Use Phillips screwdriver to secure base
to column with (4x) screws (10-32 x
5/16").
Turn stand right side up, so the base is
on the oor.
1 2 3
Assembly Instructions
Cover Your Cough Compliance Kit
BD111-0012
Column Assembly
with Top Plate
Base
Top of
column
Boom of
column
Base
6
Attach the RS001-0223 Respiratory
Hygiene Station to the column using
(4x) screws included with stand.
Tighten.
To mount the MP-070 Sign Holder,
place the lip of the holder over the
front edge of the dispenser, lining up
holes. With a athead screwdriver,
attach using (2x) barrel screws
included with sign holder.
Sign holder’s thumb access to signage
is hidden on the back.
45
Top Plate
of column
Parts included:
•Base
•Column
•Hygiene Station
•Sign Holder
•Hardware
◦(8x) 10-32 x 5/16" Phillips head screws
◦(2x) barrel screws
Tools Required:
•Phillips Screwdriver •Flathead Screwdriver
Installaon
Always mount dispensers securely prior to loading with product.

Designed for Long-Term, Heavy-Duty
Applications
Designed for Long-Term Use Designed for Long-Term, Heavy-Duty
Applications
The combinaon of copolymers
(Acrylonitrile, Butadiene, and
Styrene) gives ABS an excellent
combinaon of strength, rigidity, and
toughness.
ABS is chemical and stress-crack
resistant. It is tough, dimensionally
stable, and will hold up to long-term
use. It possesses high strength and
performance characteriscs at a
reasonable cost.
Our steel dispensers and stands
are coated with polyester powders
which makes them highly resistant to
corrosion.
Powder-coated steel is ideal for
dispensers used in a healthcare or
an industrial seng because it is
impact resistant and is not eected
by extremes in temperature.
Dispensers and stands made of
powder-coated steel are both
aracve and funconal, providing
years of service.
Copolyester resin is designed for
heavy-duty applicaons, and is used
by BOWMAN® Dispensers. We never
use acrylic in our products.
Copolyester (PETG) is typically 15-20
mes tougher than general purpose
acrylic. PETG is made to withstand
handling and reduce losses due to
breakage.
PETG resists a variety of chemicals
and commonly used cleaning agents.
It is tough and durable (not brile),
providing years of trouble-free
funconality and long life.
Clear opcal characteriscs mean
the viewer can see the content, read
text, and see true colors through
the material. It complies with FDA
regulaons for food contact.
Use mild soap and water to clean.
Petroleum-based oils, solvents, and
paints should not be used.
Standard hospital cleaning supplies
can be used.
For best results, clean by washing
the surface with a diluted soluon
of a mild, non-abrasive detergent
in cold or warm water and a non-
abrasive cloth. Standard hospital
cleaning supplies can be used.
Dry with a so cloth. Do not use any
solvent-based materials, abrasives
(e.g. Scotch-brite, steel wool),
or apply excessive force during
cleaning.
Most cleaning chemicals do not
weaken the surface or cause damage
to the material. Suggested cleaning
method is to use a so cloth, warm
water, and mild soap.
ABS Plastic
RS001-0212
Powder-Coated Steel
KS010-0412
PETG Plastic
MP-070
Material Characteristics
Care and Cleaning
Characteristics & Care
BD111-0012
Cover Your Cough Compliance Kit
BD111-0012 - Characteristics & Care
Information subject to change without notice. Dimensions are approximate. (Not to scale)