Characteristics & Care
BD615-0012
Protection System Isolation Bundle
Designed for Long-Term, Heavy-Duty
Applications
Designed for Long-Term Use Designed for Long-Term, Heavy-Duty
Applications
The combination of copolymers
(Acrylonitrile, Butadiene, and
Styrene) gives ABS an excellent
combination of strength, rigidity,
and toughness.
ABS is chemical and stress-crack
resistant. It is tough, dimensionally
stable, and will hold up to long-term
use. It possesses high strength and
performance characteristics at a
reasonable cost.
Our steel dispensers and stands
are coated with polyester powders
which makes them highly resistant
to corrosion.
Powder-coated steel is ideal for
dispensers used in a healthcare or
an industrial setting because it is
impact resistant and is not effected
by extremes in temperature.
Dispensers and stands made
of powder-coated steel are both
attractive and functional, providing
years of service.
Copolyester resin is designed for
heavy-duty applications, and is
used by BOWMAN® Dispensers.
We never use acrylic in our
products.
Copolyester (PETG) is typically
15-20 times tougher than general
purpose acrylic. PETG is made to
withstand handling and reduce
losses due to breakage.
PETG resists a variety of chemicals
and commonly used cleaning
agents. It is tough and durable (not
brittle), providing years of trouble-
free functionality and long life.
Clear optical characteristics mean
the viewer can see the content,
read text, and see true colors
through the material. It complies
with FDA regulations for food
contact.
Use mild soap and water to clean.
Petroleum-based oils, solvents, and
paints should not be used.
Standard hospital cleaning supplies
can be used.
For best results, clean by washing
the surface with a diluted solution
of a mild, non-abrasive detergent
in cold or warm water and a non-
abrasive cloth. Standard hospital
cleaning supplies can be used.
Dry with a soft cloth. Do not use
any solvent-based materials,
abrasives (e.g. Scotch-brite, steel
wool), or apply excessive force
during cleaning.
Most cleaning chemicals do not
weaken the surface or cause
damage to the material. Suggested
cleaning method is to use a soft
cloth, warm water, and mild soap.
ABS Plastic
PS015-0212
Powder-Coated Steel
MB-600
PETG Plastic
MP-047
Material Characteristics
Care and Cleaning
BD615-0012 - Characteristics & Care
Information subject to change without notice. Dimensions are approximate. (Not to scale)
BOWMAN Dispensers
20325 71st Ave NE, Suite D, Arlington, WA 98223
800.962.4660 • www.BowmanDispensers.com
