Boyo VTM600M User manual

MENU
MODE
Red wire connects anode +12v
Black wire grounded
blue wire connects to reversing lamp 12v
Video Av1 connects VCD/DVD signal input
Video Av2 connects camera singnal input
2
1345
1.Menu: menu options (press MENU to shift different menus
2. :Analog +/- (adjust brightness,contrast,color,pos:DN Normal
(reverse image),etc.)
3.Power: power on/of(when the monitor is powered on,press
POWER button to close menu,press and hold it for
1 second to power it off)
4. :Analog +/-(adjust brightness,contrast,color,pos:DN Normal
(reverse image),etc.)
5.AV: change the Av1 or Av2
MENU
MODE
2
13
45
1.Power: power on/of(when the monitor is powered on,press
POWER button to close menu,press and hold it for
1 second to power it off)
2.Mode: change the Av1 or Av2
3.Menu: menu options (press MENU to shift different menus
4. :Analog +/- (adjust brightness,contrast,color,pos:DN
Normal (reverse image),etc.)
5. :Analog +/-(adjust brightness,contrast,color,pos:DN
Normal (reverse image),etc.)
Card bolt
Battery
Battery slot
Back of remote controller
Model
Display resolution
System
Power consumption
Monitor dimension
Storage temperature
Operation Voltage
VTM600M
520(W)*288(H)
PAL/NTSC
8W (MAX)
10.46”(W)*4.17”(H)*1.03”(D)
DC12V
-4 F ~ ++149 F
Care instruction
1.We strongly recommend have qualified technician or maintenance to install this device.
2.If this monitor does not work well, please check the connection first.
3.For your safety, please do not watch the monitor entertainment while you are driving
Rear view 6” TFT-LCD Monitor
A.6” TFT monitor 1B.Remote controller 1C.User ’s manual 1
1.Parts list
2.Diagram of installation
3.Functions of Button
4.Remote controller
5.Specification
A:
B:Connection
A:operations of remote controller
B:Installation of batteries
Figure (1) Figure (2)
-1- -2-