Braun 4145 JB7192 User manual

4145 JB7192
Jug Blender
4
1
4
ender
P
5
1234
www.braunhousehold.com.cn
5722310244_JB7192_CN_S1.indd 1 03.07.17 13:17
Stapled booklet, 148 x 210 mm, 16 pages (incl. 8 pages cover), 1/1c = black – Print Spec J 92194885

English 6
10
De’Longhi Braun Household GmbH
Carl-Ulrich-Straße 4
63263 Neu-Isenburg/Germany
5722310244/07.17 JB 7192 CN
GB/China
5722310244_JB7192_CN_S2.indd 1 03.07.17 13:17

3
1
2
6
5
a
b
c
7
11
12
13
a
b
5c
c
b
2x
a
8 9 10
4
1
2
3
1
2
A
max
300 ml
200 ml
100 ml
2 oz
4 oz
6 oz
8 oz
10 oz
10
20
30
P
5
1 2 34
11
5722310244_JB7192_CN_S3.indd 1 03.07.17 13:18

4
max
B
2
1
1
1
2
2
6
3
1
2
C
max
300 ml
200 ml
100 ml
2 oz
4 oz
6 oz
8 oz
10 oz
max
300 ml
10 oz
5
4
max
300 ml
10 oz
8 oz
max
300 ml
200 ml
100 ml
2 oz
4 oz
6 oz
8 oz
10 oz
max
300 ml
200 ml
100 ml
2 oz
4 oz
6 oz
8 oz
10 oz
max
300 ml
200 ml
100 ml
2 oz
4 oz
6 oz
8 oz
10 oz
10
20
30
P
5
1 2 34
3max
300 ml
10 oz
2
3
1
5722310244_JB7192_CN_S4.indd 1 03.07.17 13:18

5
+
58…75°F
15…24°C
10x
40-90 s
1300 ml
1000 ml
350 ml
350 ml
700 ml
400 ml
1400 ml1300 g
1400 ml
30-90 s
60-90 s
60-120 s
20-30 s
40-60 s
60-90 s
5-10x
Flour
g
modes sec.
P
P
10-15x
preset
ml
ml
+
10x
Max
Max Max
10
max
300 ml
200 ml
100 ml
2 oz
4 oz
6 oz
8 oz
10 oz
2
2
5
5
5
3
53
5
3
5
3
2
1
modes sec.
5722310244_JB7192_CN_S5.indd 1 03.07.17 13:19

6
English
Our products are engineered to meet the highest
standards of quality, functionality and design.
We hope you thoroughly enjoy the new Braun
appliance.
Before use
Please read the user instructions carefully and
completely before using the appliance.
Caution
• The blades are very sharp!
To avoid injuries, please handle
blades with utmost care.
• Care shall be taken when handling
the sharp cutting blades, emptying
the bowl and during cleaning.
• This appliance can be used by per-
sons with reduced physical, sensory
or mental capabilities or lack of
experience and knowledge if they
have been given supervision or
instruction concerning use of the
appliance in a safe way and if they
understand the hazards involved.
• Children shall not play with the appli-
ance.
• This appliance shall not be used by
children.
• Children shall be kept away from the
appliance and its mains cord.
• If the supply cord is damaged, it must
be replaced by the manufacturer, its
service agent or similarly qualified
persons in order to avoid a hazard.
• Always switch off and uplug the
appliance when it is left unattended
and before assembling, disassem-
bling, cleaning and storing.
• Be careful if hot liquid is poured into
the food processor or blender as it
can be ejected out of the appliance
due to a sudden steaming.
• This appliance is designed for house-
hold use only and for processing
normal household quantities.
• Do not use any part in the micro-
wave.
• Caution: Ensure the complete lid is
placed on the jug before starting into
operation.
• Do not grab into the jug while the lid
is open – risk of injury by the knife.
• The appliance works only if the jug is
correctly assembled on the power
base.
• Before switching on, make sure the
jug is properly assembled and in
place on the power base with the lid
(incl. measuring cap).
• Do not use the device without any
load in the jug.
• Cleaning of the appliance should
follow the instruction in the relevant
section.
• Do not use the appliance for any pur-
pose other than the intended use
described in this user manual. Any
misuse may cause potential injury.
Description
1 Measuring cap
2 Lid
3 Lid gasket
4 Jug
5 Blade assembly (jug)
5a Blade gasket
5b Blade group (black)
5c Locking ring
6 Motor body
7 On/Off button
8 Pulse button
9 Speed selection buttons
10 Crush ice button
11 Cord storage compartment
12 Smoothie2Go attachment
12a Lid with drinking spout
12b Lid gasket
12c Cup
13 Blade assembly (Smoothie2Go attachment)
13a Blade gasket
13b Blade group (grey)
5722310244_JB7192_CN_S6-16.indd 6 03.07.17 13:19

7
Before Use
Clean all parts before using the blender for the first
time – refer to «Care and Cleaning».
Uncoil amount of cord needed from storage
compartment (11) at the bottom of the motor body.
(A) Jug
Assembly
• Ensure that the blade gasket (5a) is positioned
on the inside rim of the blade group (5b).
• Carefully place the blade group into the locking
ring (5c).
• Screw the blade assembly (5) to the jug (4) in a
clockwise motion until it can go no further.
Blending with the Jug
• Make sure the appliance is turned off.
• Position the line on the locking ring (5c) in front
of you and push the jug down until it is securely
locked into place. The jug handle should be on
the right or left side of the motor body. When
properly positioned, the jug will rest completely
on the motor body.
• Add liquid ingredients first, followed by solid
ingredients. This will ensure all ingredients are
uniformly blended and prevent unnecessary
stress on the motor. Firmly place the complete lid
(1,2,3) on top.
• Plug in the power cord.
• Turn the appliance on by pressing the On/Off
button (7).
• The indicator lights (8,9,10) will flash. To start
operation select a pre-programmed speed (refer
to «Operating Instructions»).
• Always stop the blender when adding more
ingredients. Ensure the complete lid including
the measuring cap is replaced.
• During operation, you may add liquids through
the drip hole in the measuring cap.
• When finished, press the pre-programmed speed
button.
• To switch off the appliance, press the On/Off
button and unplug blender before removing the
jug.
Recipe example: Vanilla-Honey-Prunes
(as a pancake stuffing or spread):
Fill the jug with 300 g pitted prunes and 200 g honey
Pulse at speed 5 for 5 seconds
Add 500 ml water (vanilla-flavoured)
Blend for 8 seconds in total
(B) Smoothie2Go Attachment
NOTE: The Smoothie2Go must only be operated
using its special blade group (13b) and for pre-
paring drinks and smoothies.
Assembly
• Ensure that the blade gasket is positioned on the
inside rim of the blade group (13b).
• Hold the blade group at the coupling from
underneath and place it upside down in the cup.
• Screw the locking ring (5c) to the cup (12c) in a
clockwise motion until it can go no further.
Blending with the Smoothie2Go
Attachment
• Make sure the appliance is turned off.
• Fill the cup (12c) with ingredients. Ingredients
should be added in reverse order of the regular
jug – solids first, then liquids.
• Carefully place the blade group including gasket
onto the cup.
• Screw the locking ring in a clockwise motion until
it can go no further.
• Turn the cup upside down, position the line on
the locking ring (5c) in front of you and push the
cup down until it is securely locked into place.
• Plug in the power cord.
• Turn the appliance on by pressing the On/Off
button (7).
• The indicator lights (8,9,10) will flash. To start
operation select a pre-programmed speed (refer
to «Operating Instructions»).
• When finished, press the pre-programmed speed
button.
• To switch off the appliance, press the On/Off
button and unplug blender before removing the
Smoothie2Go attachment.
• When finished blending, pull the cup straight up
to remove from the base.
• Turn the cup upright and remove the blade
assembly by twisting it counterclockwise.
• To remove the blade group from the locking ring,
push with both thumbs from inside the ring until
it snaps out.
• To attach the lid to the cup, ensure the gasket
(12b) is inside the rim of the lid (12a) and twist
clockwise. Carefully close the drinking spout.
NOTE: The Smoothie2Go attachment must not be
used to blend hot foods, carbonated liquids or food
supplements.
When preparing protein shakes using powder and
liquids only, use the jug.
Operating Instructions
NOTE: The blender will only operate when the On/
Off button is pressed before selecting the desired
speed or mode.
After 2 minutes of processing time the appliance
stops blending automatically. The indicator lights
(8,9,10) will flash. To re-start operation press a
speed button again.
5722310244_JB7192_CN_S6-16.indd 7 03.07.17 13:19

8
Speed Selection
• Start blending by pressing one of the speed
buttons (9).
• The indicator light of the selected function will
glow and all other lights will turn off.
• Change the operating speed by pressing a higher
or lower speed button.
• To stop blending, press the selected speed
button again.
• When finished, press the On/Off button (7) to
switch off the appliance. Unplug the blender.
Pulse Mode
The pulse mode can be used to break apart larger
pieces of food or to control the texture of food when
chopping. It can be activated with any speed.
• Press the pulse button (8).
• The indicator light will glow and the indicator
lights of each speed program will flash to signify
all speeds are in pulse mode.
• Start pulsing by pressing one of the speed
buttons (9). Hold the selected speed button as
long as the pulse should run. You determine the
duration of each pulse.
• To finish the pulse mode, press the pulse button
again.
• When finished, press the On/Off button (7) to
switch off the appliance. Unplug blender.
NOTE: Pulse mode will not work with the crush ice
feature.
Crush Ice Mode
When selected, the blender will automatically run at
staggered intervals at a preset speed.
• Press the crush ice button (10) to begin crushing.
• The indicator light will glow.
• The blender will cycle through a pre-
programmed time and stop automatically when
finished.
• To stop the program earlier, press the crush ice
button again.
• When finished, press the On/Off button (7) to
switch off the appliance. Unplug blender.
RECIPE FOR THE JUG
Tropical Smoothie
210 g pineapple
140 g cored apricot or nectarine
260 g mango
250 ml orange juice
For an exotic taste add
1 passionfruit or 1-2 tbsp honey in addition
Place all ingredients into the blender, in the order
listed and secure lid. Blend for 45-65 seconds on
speed 5 (max. speed).
RECIPE FOR THE SMOOTHIE2GO
Energy Smoothie
50 g red grapes
60 g cored pear
60 g banana
15 g walnuts
15 g rinsed spring green
120 ml water
Place all ingredients into the blender, in the order
listed and secure lid. Blend for 40-50 seconds on
speed 5 (max. speed).
For Best Results
• When mixing solid ingredients, cut them up into
small pieces.
• Always start by mixing solid ingredients with a
small amount of liquid. Then gradually add more
liquid.
• When pureeing solid ingredients, feed small
portions into the jug (4) gradually rather than
adding a large quantity at one time.
• If blending action stops during blending or
ingredients stick to sides of the jug, there may
not be enough liquid to blend efficiently.
• Use the pulse mode when mixing solid or highly
viscous ingredients to avoid the blade becoming
stagnant.
• For preparing small amounts of foodstuff use a
low speed level.
• When preparing mayonnaise, oil can be added
through the drip hole in the measuring cap.
• Do not store food or liquids in the jug.
• Avoid bumping or dropping the blender when in
operation or at any time.
• We recommend keeping your hand on top of the
lid when operating the blender.
• Do not fill the jug beyond 900 ml when pre-paring
milk based drinks.
Blending Hot Ingredients
Blending very hot ingredients may result in hot
liquid and steam being forced past the lid or
measuring cap and cause severe personal injury.
• When preparing hot foods or liquids the complete
lid (including the gasket and measuring cap)
must be placed on the jug.
• Do not fill the jug beyond 700 ml for hot foodstuff.
• If preparing greater amounts, the ingredients
must cool down to room temperature and the jug
must not be filled beyond 1300 ml.
5722310244_JB7192_CN_S6-16.indd 8 03.07.17 13:19

9
(C) Care and Cleaning
Motor body
• Disconnect power before cleaning.
• Do not immerse the motor body in water or any
other liquid. Wipe motor body, control panel and
power cord with a damp or dry cloth only.
• Do not use abrasive cleaners or scouring pads.
Jug and Smoothie2Go Attachments
Make sure the jug is empty before you unscrew the
locking ring. Handle the blade with caution.
• All detachable parts including the smoothie2Go
attachments are dishwashersafe.
• Parts may also be washed with hot, soapy water.
Rinse and dry thoroughly.
• For an efficient clean of the lids and the blades,
remove the gaskets (3/12b, 5a/13a).
Please do not dispose of the product in the
household waste at the end of its useful life.
Disposal can take place at a Braun Service
Centre or at appropriate collection points
provided in your country.
Materials and accessories coming
into contact with food conform
to EEC regulation 1935/2004.
Troubleshooting Guide
Problem Potential Causes Solution
Blender does not operate. Jug is not attached properly.
Check the position of the jug.
The jug handle should be on the
right or left side of the motor
body.
Jug is leaking Gasket is loose, or even torn. Check if gasket is mounted
properly and in the right order.
Liquid splashing out of the jug
Jug is overfilled. Check maximum quantity
recommendation.
Speed selected is too high. Check speed recommendation.
5722310244_JB7192_CN_S6-16.indd 9 03.07.17 13:19

10
5722310244_JB7192_CN_S6-16.indd 10 03.07.17 13:19