Braun Black400 WiFi Solar User manual

BRAUN Scouting Cam
Black400 WiFi 4K

Language
English---------------------------------------- 01~18
Deutsch--------------------------------------- 19~38
Française------------------------------------- 39~58
Italiana-----------------------------------------59~77
Española--------------------------------------78~96

-01-
EN
Table of Contents
1. Function Introduction------------------------------------------ 02
2. Instructions for Use---------------------------------------------02
3. Appearance, Button Function Introduction--------------- 03
4. System Settings-------------------------------------------------05
5. Playback Modes-------------------------------------------------11
6. Turn on WIFI by Bluetooth Remote------------------------ 12
7. Working Mode Description----------------------------------- 16
8. Image / Data Output------------------------------------------- 17
9. Specification----------------------------------------------------- 18

-02-
1. Function Introduction
Thank you for buying our BRAUN hunting camera. This product is
a dedicated high-definition digital camera that can record and
observe wildlife. This camera has passive infrared
sensing technology. It can automatically capture high- resolution
images and smooth video. This hunting camera will be in energy-
saving mode when there is no detection of the animal (body),
which can be for a long time. To operate the camera, please
read this manual carefully before using it. The contents
contained in this manual refer to the latest information at the time
the manual was written. Due to technical development and
production batches, it may be slightly different from your actual
use. Please refer to the actual product functions.
If you are in trouble or need help, please kindly contact our
Customer Service Team via email: [email protected]
2. Instructions for Use:
Before using this product, please find the battery container and
install eight 1.5VAA batteries, make sure the battery polarity is
correct.
When using a power adapter, please find the DC port at the
bottom of the camera and plug it in at the end of the power
adapter to supply power. (Note: Use the DC 6.0V/1.5A adapter.)
When using a newly purchased memory card for the first time,
make sure to format the memory card before using it.
This camera must use C10 or higher grade high-speed TF card.
The usage of the memory card is as follow:
According to the instruction next to the memory card slot (chipset
downward), push the TF card into the slot until the card is fully
inserted.

-03-
19
20
To remove the TF card, gently press the end of the memory card
inward, and the memory card will pop out.
If repeated or improper use too many times, the memory card
will reduce its performance or may damage the recorded data.
Please buy a new memory card.
Note: The memory card will become hot after long-term use,
which is normal.
3. Appearance, Button Function Introduction
1. UP Button
2. LEFT Button
3. DOWN Button
4. RIGHT Button
5. MENU Button
6. REPLAY Button
7. SHOT Button
8. OK Button
9. Speaker
10.TF Slot
11. AV Interface
12. USB Interface
13.ON SETUP
OFF Mode
14. LED Light
15. Lens
16. Main PIR
17. Left Secondary PIR
18. Right Secondary PIR
19. Side PIR Indicator
20. Main PIR Indicator

-04-
Buttons
Functions
UP Button
1. Short press the UP button to up select setting
when in menu setting mode.
2. Short press the UP button to switch to
recording mode when in picture mode.
3. Set the time and power-on password, short
press the UP button to adjust the numbers or
letters upwards.
DOWN
Button
1. Short press the DOWN button to down select
setting when in menu setting mode.
2. Short press the DOWN button to switch to
picture mode when in recording mode.
3. Set the time and power-on password, short
press the DOWN button to adjust the numbers
or letters downwards
LEFT/RIGHT
Button
1. Short press the RIGHT button to switch the
menu mode in the main menu mode, and short
press the RIGHT button to right selection in the
menu setting mode.
2. Short press the RIGHT button to right selection
in the replay interface.
3. Set the time and power-on password, short
press RIGHT button to select the next option.
MENU
Button
1. Open and Exit menu setup menu function.
2. In the playback mode, short press can pop up
the delete menu function.
PLAY Button
Preview the image or video file.
SHOT Button
Video recording/capturing function.
OK
Button
1. In the menu setting, short press to confirm the
function.
2. In the playback mode, short press to play and
pause the video function.

-05-
4. System Settings
Power on and off /System settings
After you put the battery in, push the mode from "OFF" to
"SETUP" to start up, and you can set the function.
Press the MENU button to set the system menu settings, the
LEFT and RIGHT buttons to switch in various modes, the UP
and DOWN buttons to enter the menu function settings. Press
the MENU button again to return to the previous menu or exit to
the preview interface as pictured:
Press the UP or DOWN button to switch between photo and
video mode.
Switch it to the ON position for monitoring mode: when it is set to
the ON position in each mode of taking a photograph, video,
video+photograph, the output of each function will be executed.
Switch to OFF to shut down the state, the LCD can not display
any output.
1. Mode
The camera has three modes: Photo, Video, Photo + Video

-06-
Photo:
Select the image size settings, which include：
30MP, 24MP, 20MP, 16MP, 12MP, 8MP, 5MP, 3MP, 1MP.
The larger the size, the higher the image resolution is, the fewer
photos can be stored by the memory card, and vice versa. This
is available on the “Image Size” Setting interface.
Video：
Select the video resolution Settings, which include: 4K 30fps, 2K
30fps, 1296 30fps, 1080 30fps, 720 30fps, 480 30fps, 360 30fps.
The higher the resolution, the higher the definition, and the shorter
the video time that the memory card can store, and vice versa. This
is available on the “Resolution” Setting interface.
Photo + Video: In the ON mode, the camera takes pictures
and then records.
Note: when the camera is working on SETUP mode and hasn’t
been operated for more than a certain period of time, it will
automatically shut down in order to save energy. The user can
click any button to open the screen to restore the display.
2. PIR Interval
Set the PIR interval. When you choose different modes, the set
time period is different.
Photo: PIR interval setting time (between 5 seconds and 60
minutes)
Video and Photo: PIR interval setting time
(between 10 seconds and 60 minutes)
During the selected time interval, the camera will not record any
photos or videos, which can prevent the memory card from
saving too many files and occupying memory capacity.

-07-
3. PIR Sensitivity
Set the sensitivity of the main sensor.
When the indoor environment is very small, "Low" shall be
selected.
When the outdoor environment is normal, "Medium" shall be
selected.
When the external environment has a great impact on the
shooting, "High" shall be selected.
4. IR LED
Option: Auto, Economy, OFF
Auto: If it is shooting night environment, it will automatically
adjust the light brightness reasonably according to the current
battery power usage.
Economy: As long as the IR LED light is turned on, the light will
be in a weaker brightness to make the battery last longer;
OFF: When it is turned off, the IR light will not be turned on when
the light is dark or completely black.
Note: It is recommended to use the "Auto" option to automatically
adjust the brightness of the IR-LED light according to the battery
power status.
5. Time Lapse
Set the time lapse of the camera. For example, to observe the
flowering process of plants, using this function and setting the
interval between each shooting, you can record the whole process
of flowering. When choosing Time Lapse, press the “OK” button to
open this menu. Selecting "ON" will pop up an Hours/Minutes/
Seconds window to set. (When this function is on, the main/
secondary sensor does not work.)

-08-
6. Monitoring Period
Set camera time to work, select "Monitoring Period," then press
"OK" to select "ON," and you can set the start time and end time
of the camera. After setting up, the camera will only work within
the set time every day, and the other time will be in standby state.
(When this function is on, the main/secondary sensor does not
work.)
7. Side PIR Setup
The induction is wider when both sides of PIR is ON (for pre-
opening). When OFF, two sides of the induction do not start.
8. Image Size
Select the image size settings, which include：30MP,
24MP, 20MP, 16MP, 12MP, 8MP, 5MP, 3MP, 1MP. The larger the
size, the higher the image resolution is, the fewer photos can be
stored by the memory card, and vice versa.
9. Picture No
Burst Photo option: 1-10, meaning 1, 2, 3…10 continuous photo-
taking functions can be selected.
10. Shutter speed
Shutter speed option: 1/15, 1/20, 1/30. The night vision is different
in brightness.
11. Resolution
Select the video resolution Settings, which include: 4K 30fps, 2K
30fps, 1296 30fps, 1080 30fps, 720 30fps, 480 30fps, 360 30fps. The
higher the resolution, the higher the definition, and the shorter the
video time that the memory card can store, and vice versa.

-09-
12. Video Length
Set the video length (5-180 seconds optional). The longer you
choose, the longer the video recording time. The system presets
the video length to 5 seconds.
13. Record Audio
Option: “ON” or “OFF”. When it is turned on, there is sound in the
recorded video; when it is turned off, there is no sound in the
recorded video.
14. Date/Time
Time & Date: Adjust the corresponding time and date according to
the local time, then press UP/DOWN to modify the size of
numerical value, press the LEFT/RIGHT button to confirm the
current value and enter the next setting option. In the year/month/
day format: press the UP/DOWN button to select the format (YY/
MM/DD, MM/DD/YY, DD/MM/YY). After setting, press OK/MENU
to return to the previous menu.
15. Time Format
Option: 12 or 24 hour settings
16. Date Stamp
When this function is turned on, the captured file has watermarks
such as time/date/temperature. When this function is turned off,
there is no watermark display.
17. Camera Name
The camera name can be set, and it will be displayed in the
watermark of the video and picture taken.
18. Password Setting
To set the camera's power-on password: Open the password
setting. You can set the 4 digits plus letter combination (0-9 and
AZ). If you forget the power-on password, use the universal

-10-
password to unlock.
The unlock method is “1111”. At the same time, turn the mode button
to SETUP mode, and the camera will be unlocked at this time
19. Bluetooth
When ON (The Mode is “ON” or “SETUP”), mobile phone can
search to find the Bluetooth.
When OFF, no Bluetooth can be searched.
20. WIFI SSID
You can modify the WIFI SSID name. After the modification, the
WIFI name will be presented, and the mobile phone can search
this WIFI SSID name.
21. WIFI Password
Set WIFI password. After setting is successful, enter this password
when the mobile phone is connected to WIFI camera.
22. Auto WIFI Off
Set the camera to automatically turn off the WIFI time. You can
choose 1 minute / 2 minutes / 3 minutes. When the camera is in
monitoring or SETUP mode, after turning on the WIFI or after
connecting to the WIFI and using the APP, the phone is
disconnected from the camera. After reaching the camera Default
"automatically turn off WIFI" time, the camera will automatically
exit WIFI and automatically return to ON (monitoring) or SETUP
mode
23. Beep Sound
Option: ON or OFF. Both keys and turn on/off are mute when OFF.
24. Language
This hunting camera supports multiple languages.

-11-
25. Format
Execute to format Micro SD card. All data will be cleared after
formatting.
26. Default Setting
All functions default to initial state when default setting.
5. Playback Modes
Remove the hunting camera from the installed position, switch
the button from "ON" to SETUP, press REPLAY button to enter
the playback mode, press UP/DOWN to view the videos and
pictures. Press OK to stop/play, and press REPLAY button to
return to preview menu. During the playback, press the UP
button to fast forward playback 2 times, 4 times, 8 times; press
the button to fast backward playback -2 times, -4 times, -8 times.
If you do not want to play the current video during the playback,
press the REPLAY button to exit the current playback.
In the playback interface, press the MENU button to enter the
Recovery Setting menu (delete/protect) .
Delete
Select “Delete Current” to delete selected pictures or videos in
the memory card of the camera.
Select “Delete All” to delete all pictures or videos in the memory
card of the camera.
Protect
Select “Lock Current” to prevent the currently set document from
being accidentally deleted.
Select “Unlock Current” to remove current document protection.
Select “Lock All” to prevent all documents in the memory card
from being accidentally deleted.
Select “Unlock All” to Unlock Multiple Document Protection.

-12-
6. Turn on WIFI by Bluetooth Remote
1. WIFI connect with APP
Before using WIFI, please install the “Hunting 4K” APP on your
mobile phone. For your Android device, please search “ Hunting
4K” in Google Play. To install on an IOS device, please search
“Hunting 4K” in Apple Store and install.
You can scan the QR code to download the “Hunting 4K” APP.

-13-
2. Running the “Hunting 4K” App in the device
Before running the app, please make sure the mode of camera is
"ON".
STEP 1：Enter the “Hunting 4K” APP, click on TURN ON
BLUETOOTH to automatically search for Bluetooth. (For IOS
system, please first turn on the Bluetooth function in the setting
page and then enter the “Hunting 4K” APP.)

-14-
STEP 2：Search for Bluetooth named CAMERA-********(8 x
random generated code), click to pair once you find it . If you don’t
find it, please search Again. Match and jump to the next step.

-15-
STEP 3：Select "Turn on WiFi"，the phone will automatically jump
to the wifi connection interface. (IOS phones cannot directly enter
the WIFI connection interface due to different systems. Please
manually enter the WIFI connection page.) Search for “Hunting
4K” and enter the original password: 12345678. After successful
connection, return to the APP and click "+" to use the camera.
3. Exit WIFI
When finished with the APP, you can click “EXIT” on the APP
preview interface to turn off WIFI. The camera will enter into
“ON” mode or “SETUP” mode.

-16-
If you forget to turn off or exit WIFI or when the camera is
disconnected from mobile phone, and reaches the camera
default "auto shutdown wifi" time, the camera will exit WIFI
automatically and return to “ON” mode or “SETUP” mode.
7. Working Mode Description
1. Calibrate the installation position of camera
In the “SETUP” mode, the best shooting angle and range of the
camera can be adjusted.
During calibration, you can choose whether to use the side
sensor for observation. The steps to calibrate the camera
position are as follows:
Tie the camera to a tree or an object 1~2 meter high, adjust the
camera lens direction, and then slowly move the camera to the
other side to monitor the motion track.
If the side PIR indicator is on, it means that the side sensor has
detected the moving object. If the main PIR indicator is on, it
means that the main sensor has detected the moving object. In
this way, the best position for installing the camera can be found.
The indicator light will be on only when the sensor detects
moving objects in the “SETUP” mode and off in the “ON” mode.
Make sure that the camera will not be interfered unnecessarily
when it is working, and avoid direct sunlight or near the
branches.
2. Normal operation mode
In this mode, the camera is triggered to shot by the sensor; the
camera enters monitoring mode when the switch is “ON”. After 5
seconds, the LED lights will turn off and the camera starts to
operate independently and enter the standby mode. Once an
animal enters the area detected by the side sensor, the camera
will be activated and detect the motion track. If the animal

-17-
continues to move to the main sensor detection area, the
camera will take photos or record video automatically, If the
animal leaves the area detected by the main sensor, the camera
will turn off and return to standby mode.
3. Night mode
At night, the infrared LED light will turn on automatically to
provide necessary lighting for taking photos. The LED light
illuminates with a range of about 3-22meters. If the animals are
too close to the camera, it may cause overexposure.
In night mode, the picture or video is only black and white. When
recording video for a long time, low voltage may have a big
effect on the stability of the camera, so DO NOT record video at
night when the power is low.
Note: If the camera is used at night when the battery voltage is
low, the current increases due to the infrared light. Low battery
may have a big effect on the stability of the camera. The camera
cannot take photos / video or take very dark images, but it does
not affect the daytime photo or video.
8. Image / Data Output
Connect to your computer to downloadphotos/videos
After the camera is connected to the computer and enters the
removable disk mode, a removable disk will be added in the "My
Computer" window. Taken photos or videos will be stored in the
"DCIM" directory on the removable disk. You can enter this
directory to copy files to your computer hard disk.
Note: To avoid data loss, do not disconnect the data cable
during file downloading, and do not plug or unplug the memory
card when connected.

-18-
9. Specification
LCD Screen
2.4 inch
Photo Resolution
30MP, 24MP, 20MP, 16MP,
12MP, 8MP, 5MP, 3MP, 1MP
Video Resolution
4K 30fps, 2K 30fps, 1296 30fps,
1080 30fps, 720 30fps, 480 30fps, 360 30fps
Menu language
English, French, Spanish, Portuguese,
Deutsch, Italian, Chinese and Japanese
Memory card
TF card support 128GB
Format
JPEG/MP4
USB
USB 2.0
DC
External DC power supply (dc-6V/1.5A)
Speaker
Support
MIC
Support
Note: the product design specifications are formulated according
to the latest information in the preparation of this manual and are
subject to change without notice. Please refer to the actual camera.