BraunAbility REMOTE User manual
How to set up the BraunAbility Remote app
427357-2 2019/04
Quick guide for A-series
Before using this device, download and read the
user manual available at: www.braunability.eu
1. Download the BraunAbility Remote app from Google
Play or App Store.
2. Activate Bluetooth on your smart-phone.
3. Press the Teach-in button (A) quickly three times in a
row and follow the setup wizard in the app.
Teach-in button
BRAUNABILITY REMOTE
BraunAbility Europe AB
Åkerivägen 7 Phone: +46 302 254 00
443 61 Stenkullen E-mail: info@braunability.eu
Sweden www.braunability.eu
How to install the BraunAbility remote receiver
1. Choose placement, either on or near the pump module.
Ensure that the Teach-in button on the receiver is easy
to access. Mount the receiver in step 4.
2. Disconnect the standard hand held control. Connect the
supplied adapter cable between the pump module and
the standard hand held control.
3. Connect the adapter cable to the receiver.
4. Mount the receiver according to the illustration using the
supplied adhesive pads. In some cases it might be neces-
sary to drill (5 mm) and use the supplied clips.
5. Use the supplied cable tie to tidy up the excess cable. Adhesive pads
Teach-in
button
Standard
hand held control
Pump module
Adapter cable
Receiver
Table of contents
Other BraunAbility Remote Control manuals
