BraunAbility REMOTE User manual

1. Download the BraunAbility Remote app from Google
Play or App Store.
2. Activate Bluetooth on your smartphone.
3. Run the lift to a position where the Teach-in button (A)
on the receiver is accessible.
4. Press the teach-in button x3 and follow the setup wizard
in the app.
How to set up the BraunAbility Remote app
427360-2 2019/04
Before using this device, download and read the
user manual available at: www.braunability.eu
Teach-in button
Quick guide for Carodoor
in combination with a BraunAbility lift
BRAUNABILITY REMOTE
BraunAbility Europe AB
Åkerivägen 7 Phone: [phone]
443 61 Stenkullen E-mail: [e-mail]
Sweden www.braunability.eu

1. Choose placement, either on or near the pump module.
Ensure that the Teach-in button on the receiver is easy
to access. Mount the receiver in step 3.
2. Connect the supplied adapter cable between Carodoor
and the receiver.
3. Mount the receiver according to the illustration using the
supplied adhesive pads. In some cases it might be neces-
sary to drill (5 mm) and use the supplied clips.
4. Use the supplied cable tie to tidy up the excess cable.
How to install the BraunAbility remote receiver
Always place the receiver inside the pump module. Place the
Carodoor control board and the receiver as illustrated below.
Adapter cable
Carodoor control board
Adhesive pads
Teach-in
button
Receiver
Important Q-Series only!
Pump module
Q-Series