BRAYER BR2400 User manual

Instruction manual
Инструкция по эксплуатации
Multicooker BR2400
Мультиварка BR2400
brayer.ru

СОДЕРЖАНИЕ
EN......................................................................................................................................3
DE....................................................................................................................................18
RU ...................................................................................................................................36
KZ....................................................................................................................................55

3
EN
MULTICOOKER-PRESSURE
COOKER BR2400
The multicooker-pressure cooker is designed for
fast and high-quality cooking of food.
DESCRIPTION
1. Gasket ring
2. Inner protective lid
3. Steam release valve
4. Lid handle
5. Lid
6. Cooking bowl
7. Control panel
8. Bowl handles
9. Body
10. Pressure indicator
Control panel/display
11. The «Start» button - start of the chosen program /
The «Delayed Start» function button
12. The «Menu» button for choosing automatic
programs
13. The «Heating» function button, cancellation of the
chosen program and settings + or - Time setting
buttons
14. Cooking program indicators
ATTENTION!
For additional protection it is reasonable to install a
residual current device (RCD) with nominal operation
current not exceeding 30 mA into the mains. To install
RCD, contact a specialist.
EN

4
EN
Jam
Fish
Yogyrt
Meat
Stew
Soup
Rice
Cooking
Steam
Languishing
Bake
Porrige
Fry Preheat
Menu Menu
1
3
7
11
12 12
13
1515
9
6
3
4
5
8
2
5
10
14
16

5
EN
SAFETY MEASURES AND OPERATION
RECOMMENDATIONS
Read the operation instruction carefully before using
the multicooker-pressure cooker and keep it for future
reference.
• Use the Multicooker for its intended purpose only, as it
is stated in this manual.
• Mishandling the Multicooker can lead to its breakage
and cause harm to the user or damage to his/her
property and it is not covered by warranty.
• Make sure that operating voltage of the Multicooker
indicated on the label corresponds to your home mains
voltage.
• The power plug is equipped with a grounding contact,
plug it into the socket with reliable grounding contact.
In case of short circuit the grounding reduces the risk of
electric shock.
• Contact an electrical technician, if you are not sure that
your sockets are installed properly and grounded.
• To prevent re do not use adapters designed for
connecting the plug to the mains socket without
grounding contact.
• In case of sparking in the mains socket and occurrence
of smell of burning, unplug the unit and apply to the
organization maintaining your home mains.
• If smoke appears from the body of the Multicooker,
unplug the unit and take measures to prevent re
spreading.
• Do not use the Multicooker outdoors.
• It is not recommended to use the unit during lightning
storms.
• Protect the unit from impacts, falling, vibrations and other
mechanical stress.
• Do not place the Multicooker next to the walls or close to
the kitchen furniture.
• Place the Multicooker keeping at least 20 cm gap
between the Multicooker body and the wall and at least
50 cm gap above the Multicooker.
• Before turning the multicooker on, always check the
condition of the silicone gasket on the inner lid, do not
use the multicooker if the silicone gasket is damaged.
• Before installing the cooking bowl, always check the
mobility of the temperature sensor located in the center
of the heating element.
• Do not turn the multicooker on without the installed
cooking bowl, always make sure there is enough liquid
in the cooking bowl. Follow the recommendations for
amount of dry food and required volume of liquid.
• Do not remove the cooking bowl while the multicooker is
operating.
• Make sure that the cooking bowl is always in direct
contact with the heating element. Foreign objects or food
pieces falling between the bowl and the heating element
will disrupt the correct operation of the multicooker.
• Before cooking, for example, meat with an outer layer of
skin, pierce the skin before cooking.
• Never leave the plugged-in Multicooker unattended.

6
EN
• Do not use the Multicooker in proximity to kitchen sink,
in bathrooms, near swimming pools or other containers
lled with water.
• If the multicooker is dropped into water, unplug it
immediately, and only then you can take the unit out
of water. Apply to the service center for testing and
repairing the multicooker.
• Do not use the Multicooker near heating appliances,
heat sources or open ame.
• Do not use the Multicooker in places where aerosols
are used or sprayed, and in proximity to inammable
liquids.
• Place the Multicooker on a at stable surface; do not
place it on the edge of a table. Do not let the power
cord hang from the edge of the table and make sure it
does not touch hot surfaces or sharp edges of furniture.
• During the operation do not touch hot surfaces of the
Multicooker.
• To avoid burns by hot steam, do not bend over the
pressure limiting valve and oat valve
• When using the multicooker, leave the lid open only
when frying food.
• •The «FRY» program allows only frying of food. Be
careful when frying food to avoid splash burns when
adding food to the hot bowl.
• Do not move the hot multicooker, turn it o󰀨, unplug it,
remove the bowl with food and wait until it cools down
completely. Move and carry the multicooker by holding
the handles on the body, do not use the handle on the
lid to carry the multicooker.
• To avoid getting burned by hot steam, be very careful
when opening the multicooker lid.
• Do not apply excessive e󰀨ort when opening the lid of the
multicooker, make sure that the pressure inside the unit
is equal to atmospheric pressure. Do not try to open the
lid of the multicooker while cooking under pressure.
• When taking the cooking bowl out, use heat-resistant
kitchen potholders.
• To avoid damage of the non-stick coating of the cooking
bowl, when removing food, do not use metal objects, use
only kitchen tools intended for cookware with non-stick
coating. Do not cut food directly in the cooking bowl.
• Before cleaning the multicooker, remove the cooking
bowl and wait until the multicooker cools down
completely.
• Unplug the Multicooker before cleaning or when you
are not using it. When unplugging the Multicooker hold
only the power cord plug and carefully remove it from
the mains socket, do not pull the power cord — this can
lead to damage of the power cord or the socket or cause
short circuit.
• To avoid electric shock do not immerse the Multicooker
into water or any other liquids.
• Do not wash the Multicooker in a dishwashing machine.
• For children safety reasons do not leave polyethylene
bags, used as a packaging, unattended.
ATTENTION! Do not allow children to play with
polyethylene bags or packaging lm. Danger of
su󰀨ocation!

7
EN
• The Multicooker is not intended for usage by children.
• Do not leave children unattended to prevent using
the unit as a toy.
• Do not allow children to touch the unit and the power
cord during the Multicooker operation.
• Place the unit out of reach of children during the
operation and cooling down.
• This unit is not intended for usage by physically or
mentally disabled persons (including children) or by
persons lacking experience or knowledge if they are
not under supervision of a person who is responsible
for their safety or if they are not instructed by this
person on the usage of the unit.
• Check the integrity of the power cord, the power plug
and the Multicooker body periodically.
• If the power cord is damaged, it should be replaced
by the manufacturer, a maintenance service or
similar qualied personnel to avoid danger.
• If the power cord is damaged, it should be replaced
with a power cord received from the manufacture or
service.
• Transport the Multicooker in the original package.
• Keep the unit out of reach of children and disabled
persons.
MULTICOOKER IS INTENDED FOR HOUSEHOLD
USE ONLY, DO NOT USE THE COFFEE
MAKER FOR COMMERCIAL OR LABORATORY
PURPOSES.
BEFORE USING THE MULTICOOKER
After unit transportation or storage at low temperature
keep it for at least 3 hours at room temperature before
switching on.
• Unpack the Multicooker and remove all the packaging
materials.
• Keep the original package.
• Read the safety measures and operating
recommendations.
• Check the delivery set.
• Examine the Multicooker for damages, in case of
damage do not plug it into the mains.
• Make sure that the specications of power supply
voltage specied on the label correspond to the
specications of your mains.
• Take the handle (4) and turn the lid (5) clockwise until
bumping, remove the lid (5).
• Remove the cooking bowl (6).
• Wash the cooking bowl (6), measuring cup, spoon,
grid for steam cooking with warm water and a neutral
detergent, rinse them under running water and dry.
• Wipe the multicooker body (9) and the lid (5) with a
damp cloth, then wipe them dry.
THE PURPOSE OF THE BUTTONS ON THE
CONTROL PANEL AND THE DISPLAY SYMBOLS
• The buttons (11, 12, 13, 14, 15, 16) on the control
panel (7) are touch-sensitive, you just need to touch

8
EN
the button to switch the necessary operation mode on,
each touch of the button is accompanied by a sound
signal.
DELAYED START FUNCTION
The «Delayed Start» function allows you to set the
time, after which the chosen cooking program will
start.
• Choose a program using the «Menu» button.
• To set the «Delayed Start» function, press the «Delay»
button for a long time.
• Set the required value of the delayed start time, in the
range of 1-24 hours. Press «Delay» until you hear the
sound signal for the second time, set the minutes.
• Press «Delay» until you hear the sound signal for the
third time, set the required temperature in the range of
30-160 ° С
• Press the «Start» button.
• The delayed start time counts down on the display. At
the end of the delayed start time, the cooking process
will start.
FOOD COOKING PROGRAMS
• By pressing the «Program» button (12), you can
choose a cooking program, and the symbols «Fish»,
«Fry», «Cake», «Simmer», «Rice», «Soup», «Steam»,
«Stew», «Porridge», «Meat», «Yogurt», «Jam» will light
up and will be ashing on the display.
• After choosing the cooking program and pressing the
«Start» button, the multicooker will turn on in 5 seconds.
«Fish» program
• The «Fish» cooking program is used to prepare sh and
sh broth.
• Place the sh into the bowl (6) and add the required
quantity of water.
• Place the lid (5) in the initial place of installation, turn the
lid (5) counterclockwise until bumping.
• Check that the pressure limiting valve (3) is in the
«Closed» position, if it is in the «Open» position, turn it
clockwise or counterclockwise.
• Install the power cord into the socket on the multicooker
body (9).
• Plug the power cord (22) into the power outlet.
• By pressing the « » button (12) choose the «Fish»
cooking program, and the «Fish» symbol will be ashing
on the display.
• The default pressure holding time is 5 minutes, you can
change the pressure holding time by pressing the «
» buttons (14), the pressure holding time should
be tailored to your needs.
• In 5 seconds, the multicooker will turn on in the «Fish»
cooking program.
• Press the «Keep warm/Cancel» button (13) to turn o󰀨
the program «Fish».

9
EN
«Simmer» program
• Use the «Simmer» program to cook ragout.
• Place the meat into the bowl (6), add spices and the
required quantity of water.
• Place the lid (5) in the initial place of installation, turn
the lid (5) counterclockwise until bumping.
• Check that the pressure limiting valve (3) is in the
«Closed» position, if it is in the «Open» position, turn
it clockwise or counterclockwise.
• Install the power cord into the socket on the
multicooker body (9).
• Plug the power cord (22) into the power outlet.
• By pressing the « » button (12) choose the
«Simmer» program, and the «Simmer» symbol will
be ashing on the display.
• In 5 seconds, the multicooker will turn on in the
«Simmer» cooking program.
• Press the «Keep warm/Cancel» button (13) to turn o󰀨
the program «Simmer».
«Jam» program
• The program for making jams, marmalade
• Put the desired fruit, sugar into the bowl, pour lemon
juice.
• Install the bowl (6) into the multicooker.
• Place the lid (5) in the initial place of installation, turn
the lid (5) counterclockwise until bumping.
• Check that the pressure limiting valve (3) is in the
«Closed» position, if it is in the «Open» position, turn
it clockwise or counterclockwise.
«Fry» program
• Use the «Fry» program only for browning or frying
food.
• The lid (5) of the multicooker must be opened, it is
forbidden to use the lid (5) even to partially cover the
multicooker; to cover the multicooker, you can use,
for example, a glass lid of a suitable size.
• Be careful when frying food to avoid splash burns
when adding food to the hot bowl (6).
• Install the power cord into the socket on the
multicooker body (9).
• Plug the power cord (22) into the power outlet.
• By pressing the « » button (12) you can choose
the «Fry» function, and the «Fry» symbol will be
ashing on the display.
• In 5 seconds, the multicooker will turn on in the «Fry»
cooking program.
• Press the «Keep warm/Cancel» button (13) to turn o󰀨
the program «Fry».
«Cake» program
• The program is used for baking, for example,
cupcakes.
• By default the operation time of the program is 40
minutes, you can change the time by pressing the
buttons 14) « ».
• Press the «Keep warm/Cancel» button (13) to turn o󰀨
the program «Cake».

10
EN
• Check that the pressure limiting valve (3) is in the
«Closed» position, if it is in the «Open» position, turn it
clockwise or counterclockwise.
• Install the power cord into the socket on the multicooker
body (9).
• Plug the power cord into the power outlet.
• By pressing the « » button (12) choose the
«Yogurt» cooking program, and the «Yogurt» symbol
(29) will be ashing on the display.
• The default pressure holding time is 8 hours, you can
change the pressure holding time by pressing the «
» buttons (14), the pressure holding time should
be tailored to your needs.
• In 5 seconds, the multicooker will turn on in the «Yogurt»
cooking program.
• You can add jam, honey or canned fruit to the nished
yogurt.
Note: setting the time for delay of cooking is not available in
the «Yogurt» program.
• Press the «Keep warm/Cancel» button (13) to turn o󰀨
the program «Yogurt».
«Stew» program
• Use the «Stew» program for cooking stewed meat.
• Place the meat into the bowl (6), add spices and the
required quantity of water.
• Place the lid (5) in the initial place of installation, turn the
lid (5) counterclockwise until bumping.
• Install the power cord into the socket on the multicooker
body (9).
• Plug the power cord (22) into the power outlet.
• By pressing the « » button (12) choose the
«Jam» cooking program, and the «Jam» symbol will be
ashing on the display
• The default pressure holding time is 8 hours, you can
change the pressure holding time by pressing the «
» buttons (14), the pressure holding time should
be tailored to your needs.
• In 5 seconds, the multicooker will turn on in the «Jam»
cooking program.
• Note:
• Press the «Keep warm/Cancel» button (13) to turn o󰀨
the program «Jam».
«Yogurt» program
• Program for preparing yogurt.
• Before preparing yogurt, pour hot boiled water into the
bowl (6) for elimination of bacteria, after 2 minutes drain
the water and wipe the bowl (6).
• Pour fresh milk into the bowl (6), add yogurt
fermentation starter or one package of yogurt. Stir the
mixture thoroughly with the sterilized spoon, in order
to avoid damage of the non-stick coating, do not use
metal objects to stir the food.
• Install the bowl (6) into the multicooker.
• Place the lid (5) in the initial place of installation, turn
the lid (5) counterclockwise until bumping.

11
EN
• Check that the pressure limiting valve (3) is in the
«Closed» position, if it is in the «Open» position, turn it
clockwise or counterclockwise.
• Install the power cord into the socket on the multicooker
body (9).
• Plug the power cord into the power outlet.
• By pressing the « » button (12) choose the
«Stew» program, and the «Stew» symbol will be
ashing on the display.
• The default pressure holding time is 15 minutes, you
can change the pressure holding time by pressing the
«» buttons (14).
• In 5 seconds, the multicooker will turn on in the «Stew»
cooking program.
• Press the «Keep warm/Cancel» button (13) to turn o󰀨
the program «Stew».
«Soup» program
• The «Soup» program is intended for the preparation of
various broths or soups.
• Prepare the required food and put it into the bowl
(6), add the necessary quantity of water following the
recommendations in the section «RULES FOR USING
THE COOKING BOWL».
• Place the lid (5) in the initial place of installation, turn
the lid (5) counterclockwise until bumping.
• Check that the pressure limiting valve (3) is in the
«Closed» position, if it is in the «Open» position, turn it
clockwise or counterclockwise.
• Install the power cord into the socket on the
multicooker body (9).
• Plug the power cord into the power outlet.
• By pressing the « » button (12) choose the
«Soup» cooking program, and the «Soup» symbol
will light up and will be ashing on the display.
• The default operation time is 25 minutes, you can
change the pressure holding time by pressing the «
» buttons (14), the longer the pressure holding
time is, the softer the cooked food will be.
• In 5 seconds, the multicooker will turn on in the
«Soup» cooking program.
• The multicooker regulates the pressure and
maintains the temperature of the liquid, so the liquid
does not go into a strong boil. For example, when
cooking chicken broth, it will be transparent, if you
need to chop the cooked food, use a separate dish
and add the chopped food just before serving.
• Press the «Keep warm/Cancel» button (13) to turn o󰀨
the program «Soup».
«Steam» cooking program
• Use the «Steam» program to cook vegetables,
seafood or to heat up food.
• Install the grid into the bowl (6) and put food on it.
• Pour some water into the bowl (6), at least two
measuring cups, required for intensive steam
generation.
• Place the lid (5) in the initial place of installation, turn
the lid (5) counterclockwise until bumping.

12
EN
• Check that the pressure limiting valve (3) is in the
«Closed» position, if it is in the «Open» position, turn it
clockwise or counterclockwise.
• Install the power cord into the socket on the multicooker
body (9).
• Plug the power cord (22) into the power outlet.
• By pressing the « » button (12) choose the
«Steam» program, and the «Steam» symbol will be
ashing on the display.
• When the «Steam» program is chosen, the multicooker
will turn on in 5 seconds.
• The default operation time of the «Steam» program is
10 minutes.
• Press the «Keep warm/Cancel» button (13) to turn o󰀨
the program «Steam».
«Meat» program
• The «Meat» cooking program is used for cooking meat
or stewed meat.
• Place the meat into the bowl (6), add spices and the
required quantity of water.
• Place the lid (5) in the initial place of installation, turn
the lid (5) counterclockwise until bumping.
• Check that the pressure limiting valve (3) is in the
«Closed» position, if it is in the «Open» position, turn it
clockwise or counterclockwise.
• Install the power cord into the socket on the multicooker
body (9).
• Plug the power cord (22) into the power outlet.
• By pressing the « » button (12) choose the «Meat»
cooking program, and the «Meat» symbol will be ashing
on the display.
• The default pressure holding time is 15 minutes, you can
change the pressure holding time by pressing the
«» buttons (14).
• In 5 seconds, the multicooker will turn on in the «Meat»
cooking program.
• Press the «Keep warm/Cancel» button to turn o󰀨 the
program «Meat».
«Porridge» program
• Rinse the rice and put it into the bowl (6), the minimum
amount of rice should be at least 1 measuring cup.
• Depending on your needs, add milk from 1 to 1.5
measuring cups. Add other food as you prefer: sugar,
salt, baking soda, etc.
• Place the lid (5) in the initial place of installation, turn the
lid (5) counterclockwise until bumping.
• Check that the pressure limiting valve (3) is in the
«Closed» position, if it is in the «Open» position, turn it
clockwise or counterclockwise.
• Install the power cord into the socket on the multicooker
body (9).
• Plug the power cord (22) into the power outlet.
• By pressing the « » button (12) choose the
«Porridge» cooking program, and the «Porridge» symbol
(29) will light up and will be ashing on the display.
• The heating time depends on the amount of rice, the

13
EN
more it is, the longer the heating time will be; after
heating, the multicooker will switch to high pressure
mode.
• The default pressure holding time is 7 minutes, you can
change the pressure holding time by pressing the
«» buttons (14), the longer the pressure holding
time is, the softer rice will be.
• For ordinary rice, you can set the pressure holding
time from 7 to 15 minutes. Rice varieties di󰀨er, so the
pressure holding time should be tailored to your needs.
For example, wild rice of high nutrition value, can be
cooked for up to 20 minutes or longer.
• At the end of the «Porridge» program, it is
recommended to wait for some time required for the
rice to steam out before relieving the pressure and
opening the lid (5) of the multicooker.
• Press the «Keep warm/Cancel» button (13) to turn o󰀨
the program «Porridge».
«Rice» program
• Rinse the rice and put it into the bowl (6), the minimum
amount of rice should be at least 1 measuring cup.
• Depending on your needs, add water from 1 to 1.5
measuring cups.
• Place the lid (5) in the initial place of installation, turn
the lid (5) counterclockwise until bumping.
• Check that the pressure limiting valve (3) is in the
«Closed» position, if it is in the «Open» position, turn it
clockwise or counterclockwise.
• Install the power cord (into the socket on the
multicooker body (9).
• Plug the power cord into the power outlet.
• By pressing the « » button (12) choose the «Rice»
cooking program, and the «Rice» symbol will light up and
will be ashing on the display.
• The heating time depends on the amount of rice, the
more it is, the longer the heating time will be; after
heating, the multicooker will switch to high pressure
mode.
• The default pressure holding time is 7 minutes, you can
change the pressure holding time by pressing the «
» buttons (14), the longer the pressure holding
time is, the softer rice will be.
• For ordinary rice, you can set the pressure holding
time from 7 to 15 minutes. Rice varieties di󰀨er, so the
pressure holding time should be tailored to your needs.
For example, wild rice of high nutrition value, can be
cooked for up to 20 minutes or longer.
• At the end of the «Rice» program, it is recommended
to wait for some time required for the rice to steam out
before relieving the pressure and opening the lid (5) of
the multicooker.
• Press the «Keep warm/Cancel» button to turn o󰀨 the
program «Rice».

14
EN
PROGRAMS OF COOKING
Program Time Temperature Setting
of time
Step time Auto keep
warm
Fish 10 min 160 °С 1-60
min/1-
24 h
Step 1: 1
min; Step
1: 1 h
8 h 60-
70°С
Fry 30 min 160 °С 1-60
min/1-
24 h
Step 1: 1
min; Step
1: 1 h
no
Bake 40 min 130 °С 1-60
min/1-
24 h
Step 1: 1
min; Step
1: 1 h
8 h 60-
70°С
Languishing 2 hours 100 °С 1-60
min/1-
24 h
Step 1: 1
min; Step
1: 1 h
8 h 60-
70°С
Jam 1 hour 110 °С 1-60
min/1-
24 h
Step 1: 1
min; Step
1: 1 h
8 h 60-
70°С
Yogyrt 8 hour 42 °С 1-60
min/1-
24 h
Step 1: 1
min; Step
1: 1 h
8 h 60-
70°С
Soup 25 min 160 °С 1-60
min/1-
24 h
Step 1: 1
min; Step
1: 1 h
8 h 60-
70°С
Stew 30 min 160 °С 1-60
min/1-
24 h
Step 1: 1
min; Step
1: 1 h
8 h 60-
70°С
Steam 10 min 160 °С 1-60
min/1-
24 h
Step 1: 1
min; Step
1: 1 h
8 h 60-
70°С
Porrige 15 min 160 °С 1-60
min/1-
24 h
Step 1: 1
min; Step
1: 1 h
8 h 60-
70°С
Meat 25 min 160 °С 1-60
min/1-
24 h
Step 1: 1
min; Step
1: 1 h
8 h 60-
70°С
Rice 12 min 160 °С 1-60
min/1-
24 h
Step 1: 1
min; Step
1: 1 h
8 h 60-
70°С
CLEANING AND MAINTENANCE
• Switch the Multicooker o󰀨, unplug it, open the lid (5)
and let the Multicooker cool down.
• Clean the body (9) and the lid (5) with a slightly damp
cloth, then wipe it dry.
• Remove the drip container, drain the liquid from it, rinse,
dry and reinstall it.
• Rinse the cooking bowl (6), measuring cup, spoon and
grid with warm water and neutral detergent, rinse and
dry them.
• Do not use metal objects or scouring pads, abrasive
cleaners or solvents to clean the multicooker and
cooking bowl (6).
• Thoroughly dry the cooking bowl (6) before placing it in
the multicooker.
• Remove the pressure limiting valve (3) from the lid
(5) by pulling it upwards, wash the valve (3), inspect

15
EN
the valve installation location (3) on the lid (5), if there
is any dirt, remove it and wipe the valve installation
location (3) with a damp cloth.
• Remove the inner lid.
• Inspect the inner parts of the valves for dirt or remains
of food, if any, remove them, wipe or rinse the lid (5)
from the inside and dry it.
• If there is dirt on the inner wall of the body (9), remove
the dirt and wipe the surface with a slightly damp cloth,
then wipe it dry.
• Wipe the surface of the heating element (only when it
is cold) with a soft, slightly damp cloth, do not let water
get inside the multicooker body.
• Do not immerse the multicooker body, the power cord
and the power cord plug into water or any other liquids.
STORAGE
• Before putting the multicooker for long-term storage,
disconnect it from the mains, let the device cool down
• Clean the Multicooker before taking it away for storage.
• Keep the unit in a dry cool place out of reach of children
and disabled persons.
Troubleshooting table
1 Malfunction Possible reason Solution
The lid of the
multicooker is
di󰀩cult to close
The inner lid with the
silicone gasket is not
correctly installed.
Check that the inner
lid and silicone
gasket are correctly
installed.
The oat valve is stuck
in the upper position.
Use a thin object to
push the oat valve
down.
2 The lid of the
multicooker does
not open
The steam pressure has
not been relieved in the
multicooker.
Relieve the
pressure in the
multicooker using
the methods
described in the
section «How to
properly open
the lid of the
multicooker».
Open the lid of
the multicooker
only when the
steam pressure is
completely relieved.
The oat valve is stuck
in the upper position.
Use a thin object to
push the oat valve
down.

16
EN
3 Steam coming
out from under
the lid of the
multicooker
The silicone gasket
is not installed on the
inner lid.
Install the silicone
gasket on the
inner lid.
The silicone gasket is
damaged.
Replace the silicone
gasket.
There are food remains
left on the silicone
gasket.
Keep the silicone
gasket clean.
The lid is not completely
closed.
Open and close
the lid of the
multicooker again.
4 Steam leakage
from the oat
valve for more
than 2 minutes
Food remains on the
silicone o-ring of the
oat valve.
Clean the silicone
o-ring.
Damage to the silicone
o-ring of the oat valve.
Replace the silicone
o-ring.
5The oat valve
does not rise
Insu󰀩cient amount of
food or water in the
cooking bowl.
Observe the correct
ratio of solid food
and liquid volume.
Add water to the
bowl for normal
steam generation.
The oat valve is
blocked by the lid lock
Close the lid
completely
6 Constant steam
output from the
pressure limiting
valve.
The pressure limiting
valve is in the steam
release position.
Turn the pressure
limiting valve and
make sure that it
is in the «Closed»
position.
The multicooker does
not maintain pressure.
Apply to the service
center.
7 The multicooker
does not turn on.
The power cord plug
is not inserted into an
electrical socket.
No voltage in the
electrical socket.
Insert the power
cord plug into the
electrical socket.
Test the electrical
socket by plugging
in a known good
electric appliance.
Malfunction of the
multicooker.
Apply to the service
center.
8 The rice is half
cooked or too
hard
There is little water in
the cooking bowl.
Choose the ratio of
dry food and liquid
depending on the
sort of rice and your
needs.
The lid of the
multicooker is opened
too early
For di󰀨erent sorts
of rice, di󰀨erent
time is needed
for steaming rice,
choose the time
when the rice is in a
closed multicooker
depending on
the sort and your
needs.
9 The rice is too
soft
Much water is poured
into the cooking bowl.
Choose the ratio of
dry food and liquid
depending on the
sort of rice and your
needs.
DELIVERY SET
1. Multicooker – 1 pc.
2. Measuring cup – 1 pc.
3. Spoon – 1 pc.

17
EN
4. Grid for steam cooking - 1 pc.
5. Power cord - 1 pc.
6. Manual – 1 pc.
ECHNICAL SPECIFICATIONS
• Power supply 220-240 V, ~ 50 Hz
• Rated input power: 1000 W
• Volume of the food bowl: 5 liters
RECYCLING
To prevent possible damage to the
environment or harm to the health of people
by uncontrolled waste disposal, after
expiration of the service life of the unit or
the batteries (if included), do not discard
them with usual household waste, take the
unit and the batteries to specialized stations for further
recycling.
The waste generated during the disposal of products
is subject to mandatory collection and consequent
disposal in the prescribed manner.
For further information about recycling of this product
apply to a local municipal administration, a household
waste disposal service or to the shop where you
purchased this product.
The manufacturer reserves the right to change the
design, structure and specications not a󰀨ecting
general operation principles of the unit, without prior
notice.
The unit operating life is 3 years
The manufacturing date is specied in the serial
number.
In case of any malfunctions, it is necessary to apply
promptly to the authorized service center.

18
DE
MULTIKOCHER
SCHNELLKOCHTOPF BR2400
Der Multikocher-Schnellkochtopf ist bestimmt
für schnelle und hochwertige Zubereitung von
Lebensmitteln.
BESCHREIBUNG
1. Dichtungsring
2. Innerer Schutzdeckel
3. Dampfauslassventil
4. Deckelgri󰀨
5. Deckel
6. Kochbehälter
7. Bedienfeld
8. Gri󰀨e des Behälters
9. Gehäuse
10. Druckanzeige
Bedienfeld/Display
11. Taste «Start» - Start des ausgewählten Programms
/ Taste für die Funktion «Zeitverzögerter Start»
12. Taste «Menü» für die Auswahl von automatischen
Programmen
13. Taste für die Funktion «Aufwärmen», Abbrechen
des ausgewählten Programms und Einstellungen +
oder - Zeiteinstellungstasten
14. Kochprogrammanzeigen
ACHTUNG!
Als zusätzlicher Schutz ist es zweckmäßig, den
FI-Schalter mit Nennstrom maximal bis 30 mA im
Stromversorgungskreis aufzustellen; wenden Sie sich
dafür an einen Spezialisten.
DE

19
DE
Jam
Fish
Yogyrt
Meat
Stew
Soup
Rice
Cooking
Steam
Languishing
Bake
Porrige
Fry Preheat
Menu Menu
1
3
7
11
12 12
13
1515
9
6
3
4
5
8
2
5
10
14
16

20
DE
SICHERHEITSHINWEISE UND
GEBRAUCHSANLEITUNG
Bevor Sie den Multicooker benutzen, lesen Sie
die Bedienungsanleitung aufmerksam durch und
bewahren Sie sie zum späteren Gebrauch auf.
• Verwenden Sie den Multicooker nur
bestimmungsgemäß, wie es in dieser
Gebrauchsanleitung beschrieben ist.
• Nicht ordnungsgemäße Nutzung des Multicooker
s kann zu seiner Störung führen, einen
gesundheitlichen oder materiellen Schaden beim
Nutzer hervorrufen, und ist kein Garantiefall.
• Vergewissern Sie sich, dass die auf dem
Bezeichnungszettel angegebene Betriebsspannung
und die Netzspannung übereinstimmen.
• Der Netzstecker hat einen Erdungskontakt; stecken
Sie ihn nur in eine Steckdose
• mit dem zuverlässigen Erdungskontakt. Bei
einem Kurzschluss verringert die Erdung das
Stromschlagrisiko.
• Wenden Sie sich an einen Elektriker, wenn Sie sich
nicht sicher sind, ob Ihre Steckdosen richtig installiert
und geerdet sind.
• Verwenden Sie keine Adapterstecker, die zum
Anschließen des Netzsteckers an eine Steckdose
ohne Erdungskontakt bestimmt sind, um das
Brandrisiko zu vermeiden.
• Bei Brandgeruch und Funken in der Steckdose
ziehen Sie den Netzstecker aus der Steckdose
heraus und wenden Sie sich an den Ihr
Hausstromnetz leistenden Dienst.
• Wenn Rauch aus dem Multikocher austritt, ziehen
Sie das Netzkabel aus der Steckdose heraus und
tre󰀨en Sie die Feuerverhinderungsmaßnahmen.
• Es ist nicht gestattet, den Multikocher draußen zu
benutzen.
• Es ist nicht empfohlen, das Gerät bei Gewitter zu
benutzen.
• Schützen Sie das Gerät vor Stößen, Stürzen,
Vibrationen und anderen mechanischen
Einwirkungen.
• Stellen Sie das Multikocher in keiner Nähe von
Wänden oder Küchenmöbeln auf.
• Stellen Sie das Multikocher so auf, dass ein Abstand
zwischen ihm und einer Wand oder den Möbeln
mindestens 20 cm und der Freiraum darüber nicht
weniger als 50 cm beträgt.
• Bevor Sie den Multikocher einschalten, bitte
immer auf den Zustand der Silikondichtung des
inneren Deckels achten. Der Multikocher darf mit
beschädigter Silikondichtung nicht betrieben werden.
• Bevor Sie den Lebensmittelbehälter einsetzen,
überprüfen Sie immer die Beweglichkeit des
Thermosensors in der Mitte des Heizkörpers.
• Der Multikocher darf nicht ohne eingesetzten
Lebensmittelbehälter eingeschaltet werden, achten
Sie immer auf den ausreichenden Füllstand der