brel-motors DC-115 User manual

Page 1
BREL motors is part of:
Manual Brel mini remote control
Type DC-115
Read the manual before you begin the installation. If these instructions are not followed,
this may lead to defects and injury in which warranty can’t be claimed.
____________________________________________________
Technical specifications Type DC-115
•Input voltage: 12V
•Battery type: 27A 12V
•Frequency: 433,92MHz
•Emission distance: 200 meter open field
2 walls 30 meter.
•Work temperature: Normal use:-10℃tot +50℃
____________________________________________________
Button specification Reach
L1 = 100 meter L2 = 25 meter
Up Down
Stop Lock
Up Stop Down Lock
____________________________________________________
Operates with these BREL motors and transmitters:
Motors: MR, MEV, MCE, MDE, MLE, MJE, MTE, MEQ, MPE.
Transmitters: DC-50, DC-90, DC-92, DC-94, DC-101, DC-109, DC-114, DC-227, DC-252,
DC-253, DC-292, DC-305, DC-306, DC-2702.

Page 2
____________________________________________________
Teaching multiple transmitters
2x P2 1x UP + STOP
Press 2x the P2 Press 1x simultaneously The added mini-
Button. (a) the up and stop button. (b) remote is ready
for use.
Up to 10 remotes per receiver. You can control as many receivers as you wish with 1 channel.
____________________________________________________
Dot-move setting
1x UP + STOP 1x UP 1x UP + STOP
Press 1x simultaneously Press 1x the Press 1x simultaneously
the up and stop button. up button. the up and stop button.
If you want to switch the dot-move setting back to normal operation, repeat the above procedure.
____________________________________________________
Delete all the emitter channels
1x UP + STOP 1x STOP 1x UP + STOP
Press 1x simultaneously Press 1x the Press 1x simultaneously
the up and stop button. stop button. the up and stop button.
All remotes are removed from the receiver's memory.