brel-motors DC-113 User manual

Page 1
BREL motors is part of:
Manual Brel timer installation
Type DC-113
Read the manual before you begin the installation. If these instructions are not followed,
this may lead to defects and injury in which warranty can’t be claimed.
Warning:
Children can not recognize the dangers of this electrical equipment and may therefore not work with it.
It is important to carefully follow this manual for your own safety.
______________________________________________________________________________
Technical specifications
Hour Sec. Minute
Mode
Time set Up
LCD Down
Up
Down Manual Automatic Random
DC 113 DC 113 LCD
______________________________________________________________________________
Technical data of the time clock
Electronic
Light push button
Timer control function
Random control function
Memory function in the event of a power failure
Up button: moves the motor up
Down button: moves the motor down
Mode button: change motor mode
Time set button: for adjusting the internal time of the transmitter
_______________________________________________________________________________
Circuit installation
230V / 50Hz of Groen/geel = Aarde Groen = Aarde
120V / 60Hz volgens Blauw = Neutraal Wit = Neutraal
Typeplaatje product Bruin = Richting Zwart = Richting

Page 2
_______________________________________________________________________________
Step 1 Set mode
Press the mode button
multiple times, to switch
between the different
modes.
Press the mode Manual Press the mode Automatic Press the mode Random
button on the timer. mode. button on the timer. mode. button on the timer. mode.
______________________________________________________________________________
Step 2 The current time setting
Press on the Press 5 sec. on the Press the mode Automatic Press the mode Random
timer the mode time set button. button on the timer. mode. button on the timer. mode.
button.
Go to auto or
random mode.
_______________________________________________________________________________
Step 3 The regular time setting
Press the mode Press the time Up arrow on the LCD Press the time Press the up Set the hours Press the mode
button on the timer. set button. screen flashes. set button. button. and minutes. button to set down.
Press the stop The product will Set the product to Press the stop The product makes an up-down
button 5x. move up and the bottom position. button 5x. movement and is ready for use.
down.