brennenstuhl BDI-S 30 V2 Manual

Directions for Use
Circuit breaker
safety plug
BDI-S 30 V2
025905 BDI-S 30 GB 3210 (GB)_025905 BDI-S 30 V2 (GB) 16

Circuit breaker safety plug
BDI-S 30 V2
Cauti n: Imp rtant safety precauti ns!
– Its use under conditions, e.g. in ambient tempe ra -
tures above 40°C or in the presence of combustible
gases, solvents, fumes, dust, relative humidity
above 80% or in wet conditions is to be avoided
without fail.
– If it can be assumed that risk-free use is no longer
possible, stop using the safety plug immediately
and make it secure against unintentional use.
Risk-free operation can no longer be assumed if it
fails the function test, exhibits visible damage or is
damaged in transit or through storage under
unfavourable conditions.
– Servicing and repairs may only be carried out by
authorised, qualified persons. nly genuine manu-
facturer’s spare parts may be used for replacement
purposes.
Descripti n f functi n
The electronic safety plug is a highly sensitive, trans-
ferable item of equipment which provides protection
against hazardous accidents resulting from physical
contact with live leads or parts. If a potential risk aris-
es, the adapter responds even at low leakage
currents (minimum 30 mA), interrupting the power
supply within a few milliseconds and assuring safe,
swift protection between the power socket and the
connected appliance.
The safety plug is intended to be used as a fixed con-
necting plug and permanent attachment for frequently
used electrical appliances.
2
025905 BDI-S 30 GB 3210 (GB)_025905 BDI-S 30 V2 (GB) 16

Directi ns f r use
1. Engage a qualified electrician to connect the safety
plug to the appliance or extension cable in place of
the normal plug, in accordance with the applicable
regulations.
Ensure without fail that the green/yellow lead is
connected to the screw marked with the earth
symbol.
2. Plug the safety plug directly into a wall socket only.
Before doing so, switch off the connected electrical
appliance.
3. Switch on the safety plug by pressing the RESET
button. A red indicator must appear in the window
above the RESET button.
4. Now carry out a function test by pressing the TEST
button. A distinct switching noise must be heard
and the red indicator must disappear.
5. The safety plug must not be used if the switching
noise is not heard and the red indicator continues
to appear in the window.
6. If the test proves successful, press the RESET
button again. The safety plug is now ready for use.
N te:
Fr m time t time, carry ut a functi n test, press
the Test butt n and perf rm the pr cedure de-
scribed ab ve.
After a p wer cut, switch n the safety plug again.
The safety plug is n t suitable f r appliances
which may give rise t c nsequential damage if
disc nnected fr m the p wer supply f r a
pr l nged peri d f time (e.g. refrigerat rs,
freezers, etc.).
This safety plug d es n t eliminate the need f r
ther essential pr tective measures.
3
025905 BDI-S 30 GB 3210 (GB)_025905 BDI-S 30 V2 (GB) 16

Technical data
Rated voltage: 220-250 V~
Mains frequency: 50 Hz
IAN: 30 mA
Response time, max.: 30 ms
Rated input: max. 3120 W
Rated current: 13 A
Max. permissible
short circuit current: 500 A
Ambient temperature: -25 °C - +40 °C
Safety class: I
Type of protection: IP 55
2-pole isolation from the mains
Specification: Circuit breaker safety plug
and Directions for Use
We reserve the right to introduce technical modifi ca-
tions without notice.
Hug Brennenstuhl GmbH & C . KG
D-72074 Tübingen
www.brennenstuhl.com
0453425/816
025905 BDI-S 30 GB 3210 (GB)_025905 BDI-S 30 V2 (GB) 16