Bresser MyTime XL User manual

Weather Station · Wetterstation ·
MyTime XL
EN Instruction manual
DE Bedienungsanleitung

DE
Besuchen Sie unsere Website über den folgenden QR Code oder Weblink um weitere
Informationen zu diesem Produkt oder die verfügbaren Übersetzungen dieser Anleitung zu
finden.
EN
Visit our website via the following QR Code or web link to find further information on this
product or the available translations of these instructions.
FR
Si vous souhaitez obtenir plus d’informations concernant ce produit ou rechercher ce mode
d’emploi en d’autres langues, rendez-vous sur notre site Internet en utilisant le code QR ou le
lien correspondant.
NL
Bezoek onze internetpagina via de volgende QR-code of weblink, voor meer informatie over dit
product of de beschikbare vertalingen van deze gebruiksaanwijzing.
ES
¿Desearía recibir unas instrucciones de uso completas sobre este producto en un idioma
determinado? Entonces visite nuestra página web utilizando el siguiente enlace (código QR)
para ver las versiones disponibles.
IT
Desidera ricevere informazioni esaustive su questo prodotto in una lingua specifica? Venga
a visitare il nostro sito Web al seguente link (codice QR Code) per conoscere le versioni
disponibili.
www.bresser.de/P7001910000000
www.bresser.de/warranty_terms
GARANTIE · WARRANTY · GARANTÍA · GARANZIA
DE
Besuchen Sie unsere Website über den folgenden QR Code oder Weblink um weitere
Informationen zu diesem Produkt oder die verfügbaren Übersetzungen dieser Anleitung zu
finden.
EN
Visit our website via the following QR Code or web link to find further information on this
product or the available translations of these instructions.
FR
Si vous souhaitez obtenir plus d’informations concernant ce produit ou rechercher ce mode
d’emploi en d’autres langues, rendez-vous sur notre site Internet en utilisant le code QR ou le
lien correspondant.
NL
Bezoek onze internetpagina via de volgende QR-code of weblink, voor meer informatie over dit
product of de beschikbare vertalingen van deze gebruiksaanwijzing.
ES
¿Desearía recibir unas instrucciones de uso completas sobre este producto en un idioma
determinado? Entonces visite nuestra página web utilizando el siguiente enlace (código QR)
para ver las versiones disponibles.
IT
Desidera ricevere informazioni esaustive su questo prodotto in una lingua specifica? Venga
a visitare il nostro sito Web al seguente link (codice QR Code) per conoscere le versioni
disponibili.
www.bresser.de/P7001910000000
www.bresser.de/warranty_terms
GARANTIE · WARRANTY · GARANTÍA · GARANZIA

English................................................................................................................... 4
Deutsch ................................................................................................................. 11

4 / 20
1 Imprint
Bresser GmbH
Gutenbergstr. 2
46414 Rhede
Germany
http://www.bresser.de
If you wish to submit a warranty claim or service request, please refer to the “Warranty” and “Service”
information in this document. Please be aware that any requests or submissions sent directly to the
manufacturer cannot be processed.
Errors excepted. Subject to technical modifications.
© 2019 Bresser GmbH
All rights reserved.
Reproduction of this document, including extracts, in any form (photocopied, printed etc.) or the use
and distribution of this document by electronic means (image file, website etc.) is not permitted without
the prior written consent of the manufacturer.
The terms and brand names of the respective companies used in this document are protected by
brand, patent or product law in Germany, the European Union and/or other countries.
2 Validity information
This documentation is valid for the products with the article numbers listed below:
7001910000000
Manual version: v1219
Manual description:
Manual_7001910000000_MyTime-XL_en-de_BRESSER_v122019a
With any service inquiries, please state these information.
3 About this Instruction Manual
NOTICE
These operating instructions are to be considered a component of the device.
Please read the safety instructions and the operating instructions carefully before use.
Keep these instructions for renewed use at a later date. When the device is sold or given to someone
else, the instruction manual must be provided to the new owner/user of the product.
4 General safety instructions
DANGER
Risk of suffocation
Improper use of this product can result in suffocation. This is particularly dangerous for children. The
following safety information must be observed at all times.
• Keep packaging materials (plastic bags, rubber bands etc.) away from children. They can cause
suffocation.
• This product contains small parts that could be swallowed by children. There is a risk of choking!

5 / 20
DANGER
Risk of electric shock
This device has electronic parts operated via a power source (power supply and/or batteries). Im-
proper use of this product can cause an electric shock. An electric shock can cause serious or poten-
tially fatal injuries. The following safety information must be observed at all times.
• Children must only use the device under adult supervision! Only use the device as described in the
manual; otherwise, you run the risk of an electric shock.
DANGER
Risk of explosion
Improper use of this product can cause an explosion. The following safety information must be ob-
served at all times to prevent an explosion.
• Do not expose the device to high temperatures. Use only the recommended batteries. Do not
short-circuit the device or batteries, or throw them into a fire! Excessive heat or improper handling
could trigger a short-circuit, a fire or an explosion!
NOTICE
Risk of damage to property
Improper handling can result in damage to the device and/or to the accessories. Always observe the
following safety information when using the device.
• Never disassemble the device. In the event of a fault, please contact your specialist retailer. The
specialist retailer will contact the service centre and send the device for repair if necessary.
• Do not immerse the unit in water!
• Do not expose the device to impacts, vibrations, dust, constant high temperatures or excessive hu-
midity. This can result in malfunctions, short-circuits or damage to the batteries and components.
• Use only the recommended batteries. Always replace weak or empty batteries with a new, com-
plete set of batteries at full capacity. Do not use batteries from different brands or with different ca-
pacities. Remove the batteries from the unit if it has not been used for a long time.
NOTICE
Risk of voltage damage!
The manufacturer is not liable for damage related to improperly installed batteries!

6 / 20
5 Parts overview and scope of delivery
B
15 17
12
13
11
1
8
3
4
5
6
7
2
A
9
10
16
14
Illustration1: All parts of the weather station and the outdoor sensor
1 Display 2 Housing (main unit)
3 MODE button (time mode selection) 4 UP button (select channel display or increase
setting values)
5 DOWN button (toggle between °C and °F or
decrease setting values)
6 MEM button (display MIN and MAX values or
delete stored values)
7 Battery compartment (main unit) 8 Stand, fold-out (main unit)
9 Wall mount fixture (main unit) 10 Housing (sensor)
11 Temperature sensor 12 Function indicator (measurement value trans-
mission)
13 Wall mount fixture (sensor) 14 Stand, integrated (sensor)
15 Battery compartment cover (sensor) 16 Battery compartment (sensor)

7 / 20
17 Slide control for channel selection
Scope of delivery:
weather station (A), outdoor sensor (B)
Also required (not included):
3 AA/LR06 batteries, 2 AAA/LR03 batteries
6 Screen display
12
5
6
10 7
12
11
98
3
4
Illustration2: Screen display
1 Current time (hours:minutes seconds) or alarm
time (AL)
2 Symbol for active alarm
3 RC clock reception symbol 4 Mode-dependent display: Seconds or alarm
time info (AL)
5 Indoor humidity (in %) 6 Indoor temperature (°C or °F)
7 Outdoor temperature (°C or °F) 8 Outdoor sensor info icon
9 Selected sensor channel (1-3, depending on
connected sensors)
10 Weather trend (for the next 12 hours)
11 Indoor info icon 12 Date display (D/M or M/D)

8 / 20
7 Before starting operation
NOTICE
Avoid connectivity disruptions!
To avoid connectivity disruptions between the devices, consider the following points before starting
operation.
1. Place base station (receiver) and remote sensor (sender) together as close as possible.
2. Set up power supply for the base station and wait until the indoor temperature is displayed.
3. Set up power supply for the remote sensor.
4. Position the base station and the remote sensor within the effective transmission range.
5. Ensure that the base station and remote sensor are assigned to the same channel.
When changing batteries always change batteries in the main unit as well as all remote units and re-
place them in the correct order, so the remote connection can be re-established. If either of the
devices is mains-powered, the power supply must be disconnected for a short moment also for this
device when exchanging the batteries. If batteries are exchanged in only one of the devices (i.e. the
remote sensor) the signal can’t be received or can’t be received correctly.
Note, that the effective range is vastly affected by building materials and position of the main and re-
mote units. Due to external influences (various RC devices and other sources of interference), the
maximum distance can be greatly reduced. In such cases we suggest to position the main unit and the
remote sensor at other places. Sometimes all it takes is a relocation of one of these components of a
few inches!
8 Setting up power supply
Base unit
1. Remove the battery compartment cover.
2. Insert the batteries into the battery compartment. Ensure that the battery polarity (+/-) is correct.
3. Replace the battery compartment cover.
4. Wait until the indoor temperature is displayed on the base station.
Remote sensor
5. Remove the battery compartment cover.
6. Insert the batteries into the battery compartment. Ensure that the battery polarity (+/-) is correct.
7. Move the CH slide control to the position for the desired transmission channel (setting CH1, CH2
or CH3 with screen display).
8. Replace the battery compartment cover.
NOTICE!When operating one outdoor sensor, channel 1 is recommended as the default setting.
9 Automatic time setting
After the power is restored, the unit automatically searches for the radio signal. It takes about 3-8
minutes to complete this process.
If the radio signal is received correctly, the date and time are set automatically and the reception sym-
bol is displayed.
If no radio signal is received, proceed as follows:
1. Press the DOWN button for approx. 2 seconds to initiate the reception of the radio signal again.
2. If no radio signal is still received, the time setting must be made manually.

9 / 20
10 Manual time setting
1. Press the MODE button for approx. 3 seconds to enter the time setting mode.
2. Digits to be set are flashing.
3. Press UP or DOWN button to change the value.
4. Press the MODE button to confirm and switch to the next setting.
5. Settings sequence: Year > Month > Day > 12/24-hour mode > Time offset > Hours > Minutes
6. Finally, press the MODE button to save the settings and exit settings mode.
11 Alarm setting
1. Press the MODE button to switch to the settings mode for the alarm time. "AL" is displayed instead
of the seconds.
2. Press the UP button to enable or disable the alarm. When the alarm is enabled, the symbol ap-
pears on the display.
3. Press the MODE button for about 3 seconds to enter the settings mode for the alarm time. The
first value to be set flashes.
4. Press UP or DOWN button to change the value.
5. Press the MODE button to confirm and switch to the next setting.
6. Settings sequence: Hours > Minutes
7. Finally, press the MODE button to save the settings and exit settings mode.
8. When the alarm sounds, press any button to stop the alarm.
12 Weather trend
The weather station will calculate a weather trend for the next 12 hours on basis of the measured val-
ues. It will be displayed as follows:
1234
Illustration3: Weather trend indicators
1 Sunny 2 Partly cloudy
3 Cloudy 4 Rain
13 MAX/MIN Weather data
Maximum and minimum indoor and outdoor temperatures as well as indoor humidity are stored by the
main unit over a period of 24 hours:
1. Press the MEM button repeatedly to display the stored values of the main unit and of the currently
set outdoor sensor one after another.
2. Display sequence: Maximum values (MAX) > Minimum values (MIN) > Current values
3. Press the MEM button for approx. 3 seconds to delete the values of the current recording period.
NOTICE!All values of the current recording period are also deleted with a battery change.

10 / 20
14 EC Declaration of Conformity
Hereby, Bresser GmbH declares that the equipment type with item number 7001910000000 : is in
compliance with Directive: 2014/30/EU. The full text of the EU declaration of conformity is available
at the following internet address: www.bresser.de/download/7001910000000/
CE/7001910000000_CE.pdf
15 Disposal
Dispose of the packaging materials properly, according to their type, such as paper or card-
board. Contact your local waste-disposal service or environmental authority for information
on the proper disposal.
Do not dispose of electronic devices in the household garbage!
As per Directive 2012/19/EC of the European Parliament on waste electrical and electronic
equipment and its adaptation into German law, used electronic devices must be collected
separately and recycled in an environmentally friendly manner.
Do not dispose of batteries and rechargeable batteries with the household waste. You are leg-
ally required to return used batteries and rechargeable batteries. After they are used, the bat-
teries can be returned free of charge to our point of sale or to a nearby location (for example,
retailers or municipal collecting points).
Batteries and rechargeable batteries are marked with a symbol of a crossed-out dustbin and
the chemical symbol of the pollutant. “Cd” stands for Cadmium, “Hg” stands for mercury and
“Pb” stands for lead.
16 Warranty
The regular guarantee period is 2 years and begins on the day of purchase. To benefit from an exten-
ded voluntary guarantee period as stated on the gift box, registration on our website is required.
You can consult the full guarantee terms as well as information on extending the guarantee period and
details of our services at www.bresser.de/warranty_terms.